Home game processing: Make that Slaughterhouse a Slaughterhome

If you haven’t noticed yet, I love to eat. Nothing is more satisfying than a home-cooked meal made from ingredients procured by my own hands. Whether it’s tomatoes grown in the garden or a lean trimmed elk roast that I cut out by hand in a cold October garage.
One of the ways I maximize the flavor and the satisfaction that comes with it, is by home game processing my own animals. It started long ago, when as a child I watched my Father bring home deer to be butchered on the kitchen counter.

Many years later, more out of necessity than desire, I began carting my own deer carcasses into the kitchen. Being a bit of a germaphobe, as well as a bit picky at the table, I couldn’t fathom leaving the cleanliness of my food to the hands of some game processer. Just the look and smell of those outfits is enough to make me toss my lunch, so I was determined to do it all myself.
In the beginning, I’ll admit it wasn’t great, but I have become pretty good at it. I think its important to share a couple of the advantages that I have by doing it myself:

I am in complete control over what gets used and how. Being particular about my food, I like to know it was well cared for both before and after it was butchered. I always take great care of my animals, trying to get them gutted, cleaned and cooled as soon as possible. I have seen overwhelming evidence that the crucial time between death and the freezer has a huge impact on the flavor and quality of your meal.
Once the carcass is cleaned, and cooled down, comes the aging. I think that aging the meat is very important, second only to the quick cleaning and cooling of it. Call me crazy, but I like to age my venison a minimum of four to five days. I actually wait until the first signs of decomposition start to show. When little specks of white mold start showing on the carcass, its time to start cutting. Much like a good piece of fruit, the best flavor comes right before it spoils. Obviously this must be done in a state of refrigeration, lucky for me, October temperatures here hover around freezing.

Not only does the flavor and texture of the meat improve, but its easier to handle and separate. Meat peels right from the bone, leaving a clean white surface. All the hard work of removing tendons and silver skin is also simplified, little to any coaxing is needed to fillet them right off of your favorite cuts. The meat itself takes on a softer, stickier texture, it almost feels greasy in a way, like near room temperature bacon.
Another benefit of butchering my game at home, is the ability to cut the meat the way I want to cook it. I have recently explored many different bone-in cuts that not only increase the quality of my meats, but also cut down on waste. When cutting bone-in pieces, you get to eat all the meat in between the bones that is typically discarded.

Some of these great examples are cutting whole T-bone steaks. Since some deer arent that big, I actually cut them as Cross-bone steaks, basically, two T-bones that haven’t been split in the middle. I cut them about 1.5” thick, and sear them in a pan, till rare (120*) at the center near the bone. The only way to improve backstraps and tenderloins is to serve them together on the bone, with butter and rosemary.

Another great cut that I’ve tried is a bone-in Frenched rib rack. This is done by again leaving the backstraps attached, and sawing the backbone and ribs out. You can then either cut lengthwise down the back, splitting the two, or go really fancy and leave them whole.

Sawing the shanks is another great way to use bones that are almost always discarded. Cooked slowly the shanks are a very tender and tasty piece of meat.
I also like cutting out the meaty ribs of deer and elk. Cooking them twice, first in a pressure cooker, and then again in the oven. This melts off the undesirable fat from the ribs. I then season them a second time and slow cook them in the oven, it makes for an extremely soft and tasty meal.

All these custom cuts and preparations can be done at your own pace, and even cooked without having ever been frozen. I love a good fresh celebratory meal during the hunt.

I use a Cutco fillet knife to remove silverskin
I double wrap my met in plastic and freezer paper, it keeps easily for years

I like to use a good fillet knife for processing my game. The flexible blade and the razor-sharp edge allow me to skin the dried rind off of most of my meat, exposing the perfectly aged and protected meat below. It also allows me to shave off any damaged parts, leaving as much meat as possible.

I start out with a sharp knife, and regularly sharpen it during the process, to keep the edge from dulling. The sharp blade easily separates broad tendons like those found on backstraps, just like skinning a fish fillet.

Many people grind a lot of their meat into burger. While I enjoy and love a good burger, I rarely grind mine until I’m ready to eat it. When I do, I use a LEM Big Bite grinder with excellent results.

Part of the reason I think so much meat is ground by so many, is because of the large scrap piles of meat that accumulate during the butchering process. I try and avoid this as best I can by keeping the meat in the largest pieces possible, and the scraps that I do get, I set aside for bottling.

Bottling venison is an often-overlooked process. I have had spectacular results putting my venison into jars instead of the freezer. A big benefit to this approach is no need to keep the meat frozen, and subsequently no loss should a freezer go down, or a power outage.
If those reasons aren’t enough, then the simple fact that it tastes so good should be enough. Bottled venison is extremely tender, and when bottled together with other ingredients like tomatoes, onions, or even a complete recipe, it is a whole meal ready to eat. One of my favorites is a simple chilli that consists of venison, tomatoes, roasted red or green peppers, onions, garlic, barley and black beans. Thrown together in a bottle with some salt, and cummin, it makes a delicious meal that requires nothing more than a source of heat to bring it to life.

Bottling meat is a slightly different process than you may be used to, do yourself a favor and look into it. It requires the use of a pressure canning pot.

When I do grind venison, I like to do it just before cooking. I also add in some pork fat, either straight fat, or fat with a little meat. This, as well as some good seasoning and some garlic and onions mixed into the burger will make one of the best hamburgers you will ever eat.

My “Meltdown Elk Burger” Elk patty with grilled jalapenos, bacon, horseradish Havarti cheese, grilled habanero onions, garden tomatoes, spicy pickles, lettuce and avocado.
I like to use good knives from Outdoor Edge to process my meat

Butchering an animal myself has led me to several practices while still on the mountain. One of them is a valiant effort to get the animal out whole if possible. Sometimes it is just too difficult, and an animal must be halved or quartered for extraction. I always prefer to get them out whole, this minimizes the amount of meat lost. For every cut that is made before the butcher table, there is meat lost. Whether it be from drying, contamination, or some other reason.
Keeping the animal whole keeps as much meat as possible protected from the elements.

Another field tactic that I use is the gutless extraction. Some of the places we hunt here in the Rockies are quite close to home. Almost every year, one or two of the deer or elk we kill, are close enough to home, that I can have them home, skinned, and washed out within thirty to forty minutes after the coup de gras is fired. That being the case, I will often leave the guts in the animal until we reach a vehicle. This avoids getting the chest cavity contaminated with dirt, leaves, or any other debris. The animal is then gutted, and transported home where it is skinned and washed in preparation for the aging process.

Another big lesson I have learned, for antelope, in particular, is to get as much blood out of the animal as you can. In my experience, one of the best practices is to take head shots. This leaves the circulatory system intact, allowing it to evacuate its volume even after brain-death has occurred. Obviously this practice is not recommended for an animal who’s head you intend to mount, or save. But for antlerless and meat hunts, it works great. Not only does it empty most of the blood via the headwound, but it does little to no damage to the eatin bits of the animal. And its much easier to gut and clean.

I cant believe how much venison I could have enjoyed so much more over the years, instead of suffering through it. It doesn’t take a huge amount of effort to put these things into practice, but it will make a night and day difference in how you enjoy all that beautiful game meat that you work so hard for. I hope these tips help make your meals better and more memorable, and please feel free to offer any tips you may have!

-CBM

If you like these ideas, there are more of them here

6 thoughts on “Home game processing: Make that Slaughterhouse a Slaughterhome

  1. Appreciate you sharing your tips! My aging experience is mostly based on wet aging. There are aspects of wet aging that I prefer… “completing” the work from the hunt shortly after the take (typically 24 hours), the packets fit in my fridge for temperature control (especially in early season hunts), less waste/cuts of dried skin.

    Your writing makes me want to retry dry aging but can you provide any insights you have on why you prefer dry aging? I’m just curious if you find the taste is better (I’ve heard it is).

Leave a Reply