Introduction
My first 5.56 can was a Yankee Hill Machine Turbo, and having used it heavily over the last few years I have become quite fond of it. Working across various rifle platforms and even various calibers it has earned a safe place in my suppressor lineup. So today I bring you a new version of the Turbo, the Yankee Hill Machine Turbo T3. To see if this new unit stands up the great performance of its predecessor.
The YHM Turbo T3
The Turbo T3 is a the latest in the development of the Turbo line of suppressors. Preceded by the T2, with which it shares a great deal of features. With an upgrade in baffle design, the T3 added some additional porting to the internal baffles that reduced backpressure to the host firearm. Other than that the T2 and T3 are about the same thing.
Both use the same hub mounting system, which allows the user to change the mounting configuration. You can use either a direct thread cap of various different thread pitches, or other options. I really like using the Phantom QD system, as I have a variety of muzzle devices that my various YHM suppressors can mount to. Both models also use inconel for a blast baffle which is significantly more resistant to erosion.
The muzzle of the T3 has a couple port facets that I assume are made to add additional turbulence as gas escapes. Together with several other tiny scallop cuts it gives a handsome finished look to the Turbos. At the breach end of the suppressor you will also find some tool engagement cuts to allow you to tighten or loosen the mounting hub of your choice. Turbos come with a couple tools as well that allow you to do this service.
The whole thing is finished with a black Cerakote finish for durability and a non-reflective finish. My older Turbo has been repainted at least once, not because the finish isn’t durable but because I am a little hard on them. So in an act of some vanity I repaint them every so often to keep up my drip.
Specifications
- Caliber: 5.56mm
- Weight: 12.8 oz. w/adapter
- Length: 5.59ā/6.5ā w/adapter
- Diameter: 1.5625ā
- Construction: 17-4 Ph SS/Inconel 718 Blast Baffle
- Mount: Phantom 1/2ā x 28 Q.D. HUB adapter
- Decibel Rating: 134 dB
- Minimum Barrel Lengths:
- 5.56 NATO: 10ā Minimum barrel length.
- Full Auto Rated
Shooting the Turbo T3
Both the T2 and T3 models fit snugly to my mounts, which made it easy to run back and forth between a few different rifles. One of the rifles I tested it on was a pretty standard Aero Precision 16″ direct impingement rifle, as well as my Desert Tech WLVRN which is a 20″ piston gun.
The larger AR rifle ran like a champ, and sounded fantastic. Accuracy from the rifle suffered no degradation while suppressed, in fact it might have been better. Dedicated 5.56 cans like this one seem to always sound so good to me. The sharpness of the report removed entirely leaving only a pleasant hiss. On the downside however, I did notice a larger gas exhaust from the ejection port. This was expected as it is pretty stereotypical when shooting suppressed, and as long as its done outside it doesn’t bother me at all. For the record most of my shooting is done outside.
When shooting the new Turbo on my WLVRN rifle, I was able to use the adjustable gas valve to lower the flow of gas coming back. Additionally, since this little bullpup uses a piston there is less gas coming out of the ejection port, which is nice since it’s next to your face. While it was a little better than on my AR, it was still a touch more noticeable gas than unsuppressed. Again I’ll stress the point, this is pretty common with suppressed shooting. Some designs have improved gas flow designs to reduce backpressure, and they are somewhat better in my opinion but still its not perfect.
I took the Turbo along for a prairie dog hunt a few weeks ago, attached to the WLVRN. It definitely seemed to help the accuracy during that hunt, as we scattered the little varmints all over the desert. Shooting my rifle next to my buddies we all got an earful from each can. The noise from the Turbo T3 compared to a YHM Turbo K and a SiCo Omega 30 was excellent. We were all shooting .223 rifles, and it was hard to tell which was the better sounding can, at least without professional testing equipment.
My Recommendation
If you are looking to get into a 5.56 suppressor, there are a million options to choose from at this point. In my opinion, the YHM Turbo series is a great line of suppressors. They provide excellent sound suppression, and quality construction for a very affordable price. Whether you choose to go with the Turbo T2, the Turbo T3, or the shorter Turbo K, I think you will be happy with your purchase. These suppressors are built for durability, I have not been easy on them. I have even shot limited amounts of full-auto through them, limited because I am not a rich man. And I expect unless you are a rich guy with pallets of ammo and machine guns, these suppressors will last you a lifetime.