What a time to be alive! Shooters have so many good options to choose from these days, the variety makes this fat kid feel like he’s in a candy shop. Today I’d like to tell you about another great product that followed me home, it wouldnt be as significant if it hadn’t kicked out a long time inhabitant of my safe.
Ive said it before, the optics game is a vigorous one, but thats good for consumers like us. With so many great companies fighting for our dollars, there is almost without question a good option for every budget and application.
I bought my first Nikon Rifle scope many years ago, it was a slightly used Buckmaster 4-14. I mounted it on my old 25-06 and used it to kill both my first deer and my first elk. I hope your sitting down, but in my humble and true opinion, Nikon has always made some great optics. There have been times where they were behind, and they may not have had the best offerings, but for the most part what they made was of good quality. For a long time, Nikon was the best I could afford, and I made do with what I had.
Thank goodness times have changed, and like the times, Nikon has stepped up their line of scopes. I was introduced to the newest Nikon tactical scopes (the Black line) a year or so ago. It was an event for writers to see some of the new products. Nikon showed up with the Black FX 1000 line of scopes, they feature a 30mm tube, first or second focal plane reticles, and they are also available in either MOA or MRAD subtensions. Not only did they have these more modern features, they also brought the always high quality Nikon glass lenses that they are so famous for. That day we shot and killed steel at 1800 yards with the Black 6-24 mounted to a .375 Cheytac.
I could barely wait to get my hands on one, the scopes had everything I wanted in a sub $1000 price range. And even better than that, they were priced well below comparable scopes from other trusted names.
When I got my FX 1000 4-16 in the mail (after chasing down the UPS driver) I hastily opened up the package to get this party started. I already had a rifle and rings ready to go, it was a Winchester Model 70 chambered in 7 WSM, it’s sole purpose in life is to make elk into elk steaks. Within a few minutes I had the scope mounted, and I took it outside to bore-sight it.
Another great feature of the FX 1000 is the zero-stop, if your not familiar with a zero-stop, you need to be. After zeroing your elevation turret for whatever your zero distance is, you set the zero-stop. This is accomplished by loosening the three allen screws around the turret grip area, and lifting the turret itself off the top. Underneath you will find another knurled ring with another three allen screws holding it tight over a threaded stud. All that is required is to loosen the screws, and then turn the knurled ring down until it stops. Once you’ve done that, you retighten the allen screws and re-install the turret aligning it at the zero mark.
This feature makes it simple and reliable to return your scope to zero after dialing elevation for distance. The Nikon zero-stop is fast, strong, and clean. I say clean because it doesnt use shims or blocks like other scopes. These types sometimes can cause a slow buildup of friction as they lockup, causing a mushy zero, and unessesary effort to start or stop turning. The Nikon is completely opposite of that, it turns until it stops, exactly on zero, every time.
The FX-MRAD reticle is much simpler than many of the hottest reticles on the market today, and thats just fine. The reticle has plenty of detail for real use, without getting too busy or complicated. Subtensions with .2 MIL and a hollow spot on the half MIL marks is very handy when doing holdovers or wind doping. Numbered marks on the even MIL marks are also handy when you start getting further away from the centerline. Reticle’s have advanced just like scopes, many shooters like the “Christmas tree” type reticles that are popular these days. While I personally prefer them, I dont mind using a standard milling reticle such as this either. And for those who like an uncluttered perspective they are probably better.
With the scope now mounted, I was ready to hit the range, which for me is up into the snowy and clouded Wasatch Mountains.
My bore sight job was close enough to get us on paper, and with a couple quick reticle measurements, I had the rifle zeroed. Even with a zero cant scope base, the rifle still had 18 MRAD of its 25 available MRAD to correct up. On this rifle 18 MRAD will get me out to approximately 1600 yards, which is beyond where I would ever anticipate using it, so no worries there.
With ten MRAD per revolution turrets, its easy to keep track of which rev of the turret you are on. Even so, the turret base has markings for you to keep track of, something all manufacturers should do.
Speaking of the turrets, they are just stiff enough, and have a crisp and audible click. With a rifle as flat shooting as this, the scope will likely never dial more than seven or eight MRAD, but it’s nice to have more if you need it.
I also tested the turret values, I did this by measuring out 100 yards exactly, and bolting the scope into a vise. Then measured the click value against a yard-stick. The results were very pleasing, especially since I am so bad at math. The turrets were very consistent and repeatable, always returning to the same spot when I hit the zero-stop. And over the course of the 18 MRAD from zero to topped out, there was as little as 0.3 MRAD of disparity between what was dialed, and what the reticle actually moved. I’m no Galileo, but thats close enough for what we do around here.
The parralax adjustment was pretty close to the aligning numbers on the focus knob. I usually disregard the numbers and just turn it to where the image is clearest, and minimum parralax, so its pretty nice when they are at least close.
Lens quality is exactly what you would expect from Nikon. All images were bright and clear, even in lower light conditions as the sun faded. Very minimal aberration around the edge of the sight picture regardless of magnification setting.
And despite the cold blowing snow of the high Rocky Mountains, the scope never fogged up on me, though I did need to blow the accumulation off the glass now and then.
Shooting with the FX 1000 was what you would expect from a good scope. Targets are easily identified, and the reticle was very useful for measuring corrections at distance. The texture of the magnification ring and turrets was a very agressive, I like the firm purchase it gives to your hands. And the firm audible clicks would make it easy to use even when wearing gloves.
I took the rifle all the way out to 1150 yards, I was hitting a little high at that distance, but using the reticle to measure the deviation, it was easily corrected. The 4-16 magnification range is great for these distances, enough to clearly see targets, trace, and impacts. While not being so magnified as to darken the image, and exacerbate every small movement.
I’ve tried to come up with something about this scope that I dont like, and to be honest I’m having a hard time doing it. The price point of this scope puts it in prime position for guys who want a reliable and tough riflescope, but who dont want to spend four digits. It comes with the prestige of Nikon, and their no fault lifetime repair/replacement warranty.
If you are working on your next rifle build, and your optics budget is around $600, you’d be ill-advised to not check out the offerings of the Nikon Black FX 1000 in either 4-16 or 6-24. I told you at the beginning that this Nikon replaced an old standby scope, the particulars aren’t as important, but I paid significantly less for the Nikon, and I feel its superior in every way.
I have used and played with many high end scopes, and it’s very refreshing to find such satisfaction at this price, for that I give Nikon a near perfect score.
That old Buckmaster was the best I could afford at the time, but the new FX 1000 will serve on many of my rifles because it is a perfect fit, irrespective of its cost.