ATN THOR Riflescope

Being in control, or at least feeling like you’re in control of a situation seems to give us satisfaction in our outdoor adventures. Being prepared with weapons and the tools needed to go where we want, and do what we chose are a large portion of that feeling of authority over our immediate surroundings. Until the sun sets, when much of our dominance goes out the window.
Today we are going to take a look at some equipment you can add to your arsenal that will keep you on top of things in pure darkness.

ATN Corp has been in the business of manufacturing low light sport optics for nearly 30 years now. They have been innovating night vision and thermal devices in every imaginable way.
Today we are going to speak about one product in particular, ATN’s THOR 4 640 2.2-25X thermal riflescope.

The THOR

The ATN THOR 4 is much more than just a low light thermal imaging optical sight. It also has an incredible array of smart functions like built in GPS, blue-tooth connection to apple and android devices, video and photo recording, and even ballistic solver built into the riflescope.
There are other more simple features that will enhance your experience with this scope as well. Rings to mount it come included with the scope, low battery consumption make the power last longer than anticipated. And you can even get it in one of your favorite camouflage coatings. There is much more to get into on the features, so I’ll move along.

Unboxing

When I opened the box to see the scope inside, I was a bit surprised. The THOR appeared to be a complete unit, sealed and ready to go. I pulled out the instructions because I’m an idiot when it comes to tech. The directions were easy enough to figure out, but for added help for those of us who struggle they even added some stickers in various locations indicating the purpose and function of each control.

Control panel on top of the housing, note charging port and SD card slot

There was also things such as a charging adaptor and the mounting rings to install the scope on your rifle. After a few hours good charging time, I took the THOR outside to see what I was missing in the darkness. I have used other thermal optics before, and I was perhaps expecting a little bit more because of my previous experience. But to be fair, the units I was comparing to this ATN cost three to four times as much. So there is certainly a grain of salt to take with my expectation.
The THOR was excellent for identifying small animals around the neighborhood inside 300 yards. I zoomed the power in and out using the power wheel on the left side of the housing, and then focused using the rotating objective housing. The resolution was more than adequate for identifying and targeting potential animals.

In the field

I wanted to get this scope mounted and into action as soon as possible. Using the provided rings, I mounted it up on my Desert Tech MDRX 308winchester.
It took some getting used to, but after a bit I had the THOR figured out. I managed to get it zeroed, though it took me more shots than it should have. The “Nuc” feature was an important one to figure out quickly. As far as I can tell, it seems to calibrate the sensor according to the current field of view. I found that significantly changing your field of view would cause some of the resolution to vary some, and by cycling the Nuc feature on the new viewing area would bring back the image. There is also an “Auto-Nuc” that you can set in the controls to have the device re-Nuc itself every so often.
The display was full of information, possibly more than some folks may want to see. It kinda made me feel like I was looking through the heads up display of an F-18. Angles on both vertical and horizontal plans are displayed, as well as a compass heading. There are an assortment of reticle choices you can choose depending on your needs, as well as a simple menu that can be cycled through quickly using the buttons on top of the housing. I had already installed a micro SD card that is used to store images and video clips recorded through the scope.

The Obsidian 4 Application

It was time to get the Obsidian 4 application connected and running, this app is made and offered by ATN for the owners of their products. It allows details entry and customization for some of the more tedious bits of data you definitely want right.
It took a minute to figure out how to properly get it connected to my phone, but after watching a helpful video on ATN’s website I was in business.

The Obsidian 4 app allows you to customize the data used in the ballistic solver that comes in the scope. You can change calibers, bullet weights, velocities and other pertinent information used to calculate the corrections for distance. You can also watch through the scope remotely which is also pretty cool, there is a slight delay in transmission but you can see everything you need to see and record it to your phone if you like.

The app was easy to navigate, and update the information. To be completely honest I found it to be an incredible amount of customization, I am barely smarter than most primates and I was beginning to worry I was going to screw something up faster than anything. But in a short time I had it setup to my liking, and ready to shoot. Continue Reading Here…

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s