Preface
We live in an interesting time, never before has there been so many options for firearms enthusiasts. And at the very same time there is a breathtaking assault against the right to obtain and bear all these arms. Todays subject might appear up front to be a step backwards in firearm design, but it for sure is a step towards countering the assault against second amendment rights for some. Today I present to you the Bear Creek Arsenal BC-15 Bolt-Action rifle. Your eyes aren’t fooling you, this is indeed a bolt-action AR-15 essentially.
That is why I said it might seem like a step backwards in firearm development, but you will soon see what makes this product a good idea.
The Bear Creek Arsenal BC-15 bolt-action rifle
Its appearance as an AR-15 rifle is by design, lets look at the rifle’s features to get started. The lower receiver is in fact a completely normal BCA complete lower, just like every other BCA lower it uses all the same parts interchangeably. (That will come in handy later) Where it differs is the upper receiver, though it also uses a great deal of the same parts there as well.
Edited to add: I enjoyed this rifle so much, that I ordered a second upper. This time an eighteen-inch heavy-barreled 6.5 Grendel. I wanted to have options, as well as another capable rifle for larger purposes. The Grendel upper shares much of the same features, but obviously runs on different magazines.
The Curious Bolt Design
The semi-auto bolt-carrier has been replaced by a different carrier, similar to the semi except missing the rear-most part. This results in the carrier having a fork-like back end. The bolt itself appears to be a standard AR bolt, with no gas rings installed. It rides in the bolt carrier secured by a regular cam-pin, but there is no cam-path cut into the carrier. The resulting motion looks like this; as the bolt handle is pushed forward, the bolt engages the barrel extension the same way it would in a semi-auto, but it rotates and goes into battery when the bolt-handle is pushed down.
Bolt Operation
The operation feels weird for several reasons, first off; the buffer in the stock applies spring tension on the bolt when pulled fully to the rear. This spring pressure is only felt about halfway forward from the extreme rear of the bolt stroke. Secondly; there is another spring behind the bolt inside the carrier. It keeps the bolt all the way forward when pushing into battery, but it also causes some back pressure when chambering a round. And a springs the bolt handle back when it is lifted out of battery.
At first it is quite awkward, and not what you are expecting. However, once you get the hang of it, it is actually quite fast. The opposing forces from the bolt-spring and the buffer spring actually seem to help you run the bolt faster. Once you get over it, its no bother at all.
The Barrel
From the barrel extension forward, as best as I can tell it is 100% the same barrel used in other comparable rifles. Which makes sense from a manufacturers perspective. Since no gas-block is needed, they simply installed a ring over the gas-block perch to prevent gas from blowing out the gas hole. The barrel is truly free-floated in that nothing touches it forward of the barrel nut.
The muzzle is threaded 1/2-28 like most 5.56 barrels, and it came with BCA’s typical muzzle device. I would be changing it out for my Yankee Hill Machine Turbo T3 suppressor almost immediately.
When shooting the 6.5 Grendel upper, I used my Banish Meateater suppressor. It was very pleasant shooting the Grendel with this suppressor.
The Rest
Everything else seemed pretty typical Bear Creek parts, the handguard used on all their AR’s, the lower parts and buttstock all look and function just like you’d expect them to. I’ll give them points on their pistol grip, I do like it much better than most typical grips. They also put one of those accuracy wedge pieces of polymer in it to keep the upper and lower from wobbling.
Other Models and Calibers
Bear Creek also makes these options in other calibers, and you guessed it they also make it in a large frame configuration as well. The options are actually pretty impressive, you can get either Parkerized barrels or 416 Stainless. There are also a great variety of barrel lengths you can choose from, as short as 7-inches and up to 22-inches. And perhaps too many chamberings to mention but I’ll try:
| BC-15 Bolt-Action Calibers | BC-10 Bolt-Action Calibers |
| 5.56 Nato | .243 Winchester |
| .223 Wylde | 6.5 Creedmoor |
| .224 Valkyrie | .308 Winchester |
| .300 Blackout | 8.6 Blackout |
| 6mm ARC | |
| 6.5 Grendel | |
| 7.62×39 Soviet | |
| 350 legend | |
| 450 Bushmaster | |
| 458 SOCOM | |
| 12.7×42 (50 Beowulf) |
Shooting the BCA BC-15 Bolt Action
To properly give this rifle a test, I took it across the state to ensure it got to see some country. Initial testing was done in the desert south west, coyote and jack rabbit country. Unfortunately neither of them showed up for the test, but the rifle worked great.
Ergonomics
I will say for sure that it took a little bit to get used to the bolt-throw on this rifle. It is unlike any other bolt-action I’ve ever operated, the lift is very short and the stroke has various degrees of resistance. It took me a minute to figure out what I was doing wrong, but once I got a feel for the operation it became second nature and particularly fast. The buffer spring pressure almost helps you transition from rearward motion to forward by adding spring pressure.
I did notice with the second upper in 6.5 Grendel the bolt was a little more finicky. I am not sure that this had anything to do with the cartridge difference or bolt-face change. Or if it was simply a side effect of mass-produced parts and tolerances.
The rest of this rifle is 100% pure AR, so you already know what that feels like. The trigger that came in the rifle was nothing to write home about but it did not keep the rifle from shooting well. I like the rubberized BCA pistol grip, it gives great purchase and is quite comfortable. The butt stock on the other hand could have come from a CAR-15 airsoft clone, or perhaps even a Nerf gun, but it worked just fine.
Reliability
As is typical with bolt-action rifles this one was 100% reliable. The only issues I had were part of the learning process with operation the bolt properly, as well as some ammunition that was a touch long for the chamber.
The rifle cycled cartridges flawlessly, and tossed them out in a neat pile. Feeding from P-Mags is one of the appealing features of this rifle, and it worked great. I was a bit irritated with the AR bolt catch that would lock the bolt up when the last round was fired, but I should have anticipated it.
Accuracy
None of the previous aspects really surprised me, but I was a bit impressed when I put the rifle on paper at 100 yards. With cheap ball ammo the rifle would shoot groups averaging slightly over 1 MOA, and when using PMC Match 77 grain it would print five-shot groups around .6 MOA quite reliably. I guess I shouldn’t be surprised that modern manufacturing processes can produce 1/2 MOA guns that shoot that well for less than $450. I look forward to trying some additional handload options to see if I can get it to shoot even better.
The Grendel, while still shooting sub-MOA deserves a little more attention. I intend to keep tuning handloads to find one that shoots even better. I expect I should be able to shoot 1/2 MOA groups with it as well.
Value
I did a quick and simple glance over the 223 bolt-action rifles for sale at Sportsmans Warehouse. And of the fifty plus options available there, only half a dozen of them were in the same price range as this rifle. I’ve shot some of those rifles and they didn’t print groups like this as easily.
The great shooting performance of the BC-15 Bolt-Action rifle means it could serve well as a varmint rifle, target shooting or any other similar activity. And because it is essentially an AR-15 there is no shortage of ways to improve it, which takes me to the next subject.
My working theory is two-fold; this rifle being a bolt-action type, there are far less likely to be laws infringing on the right to keep and bear it. So for folks who live behind enemy lines in shit-hole states like California or Maryland, they can finally join the ranks of AR-15 owners, even if they have to cycle the action by hand. And I suppose they can pick fights with the pump-action Ak guys.
The second part of my theory is that buying this “bolt-action” rifle in restricted states, is a perfectly legitimate reason to have a completely functional and uninhibited AR-15 lower receiver. And with the push of a couple pins you can enjoy the same liberties as free men everywhere.
Pros and Cons
The popularity of the AR-15 family of rifles has brought the prices down, and since this rifle borrows so much from the AR family, it too has benefitted. Having a great many parts and accessories interchangeable is a great asset, and allows you to set this rifle up however you see fit.
While it may take a minute to get used to, the rifle works quite well. And its performance on the range was refreshingly positive. Reliable function paired with the incredible compatibility makes it both fun and versatile. Because the rifle shoots better than I had anticipated, I’m actually considering putting a better trigger in the rifle. The mil-spec trigger it came with isn’t terrible but could be better, and I’d like to see how much accuracy I can squeeze out of it.
Based on price alone, I think this rifle is pretty damn reasonable. But there are few things I’d change if I could; First off is the super cheap butt stock. I understand why they use cheap ones, as lots of folks change them out anyways. I for sure will be changing it something different. There is also a little pet peeve of mine about putting company logos all over the place, like, you could just put it on the receiver and call it a day. But that is of course just a subjective complaint. Honestly I don’t know what else I’d change on this rifle after what I’ve mentioned.
Final Thoughts
Some folks might chuckle at the idea of a bolt-action AR, I’d be lying if I didn’t say I did the same. But the more I thought about it, and especially after shooting this little rifle quite a bit, I can say my mind has been swayed. Not saying I would give up my traditional bolt-guns in favor of this one, just that I can absolutely see the reasoning behind this design, and a value in having it.
The Bear Creek Arsenal BC-15 Bolt-Action rifle gives a pretty impressive performance considering the sum of its parts. Aside from that, it offers gun owners in tyrannical states an option to play in the AR-15 world. And it does all this for a pretty reasonable price attainable by average Americans. I look forward to putting this rifle to good use on some varmints this spring.