A Pipsqueek?
Its a word I hadn’t heard since maybe the 1980’s I think, so when I heard it in a conversation about suppressors my ears perked. Rimfire suppressors take .22 caliber firearms to the next level, and the Anechoic Pipsqueek 22 suppressor is the smallest and lightest suppressor I’ve ever seen or touched. A compact version of the company’s Anechox 22 suppressor, giving maximum compact suppression. Today we’ll take a short look into this tiny suppressor, and see how it performs.
The Anechoic Pipsqueek Suppressor
The Pipsqueek is made from both titanium and aluminum, making it very lightweight. Its handsome faceted design is sure to catch the eye of any suppressor fanatic. With such a small size I was genuinely worried about losing this suppressor at some point. I can imagine my wife finding it in the laundry after having left it in my pants pocket.
At just three and a half inches long, I was also a bit concerned if the Pipsqueek had enough volume to capture enough gas to be effective. My plan was to shoot it across a variety of rimfire guns and compare it to my inventory of other rimfire suppressors.
Specifications
| Anechoic Pipsqueek .22LR Suppressor | |
| Suppressor Weight | 1.5 Ounces |
| Dimensions | 3.5 × 1.1in |
| Suppressor material | 7075-T6/Titanium Construction |
| Mounting Threads | ½-28 TPI |
| Cartridge Compatibility | 17 HMR, 22 LR, or 22 Mag |
| Color Options | Blackout, Flat Dark Earth, Olive Drab, Raw Aluminum |
Unboxing and Initial Impressions
Like other Anechoic suppressors, the Pipsqueek comes in a nice foam lined box. Also included with the tiny suppressor is a tool that can be used for various purposes. The tool has a very unique design that allows you to grip the base hub of the suppressor. This gives a great deal of torque for removing a sticky suppressor should you need it.
The other end of the wrench features two pins that allows you engage the front-cap of the suppressor. With this interesting design you can get great purchase on both the front and rear caps of the suppressor.
The packaging, tool and the of course the suppressor itself all look very high quality. And I couldn’t wait to get this can on the range, and within an hour or so, I was.
Shooting the Anechoic Pipsqueek
My first range experience with the little can would be using a Desert Tech Trek 22 rifle (a Ruger 10/22 variant). Not only did I bring the Pipsqueek, but we brought a couple other suppressors as well to compare it to. With three identical rifles each with a suppressor installed and shooting the same ammunition, we shot each one in sequence.
I expected the Pipsqueek to be significantly louder than the other cans, based simply on its size. But to everyone’s surprise, it was barely a noticeable difference on these rifles. In fact, we agreed that if you were shooting outside and not paying attention you might not even notice the disparity. This was great news to me, I love compact cans that work.
Switching it up to handguns, I mounted the Pipsqueek on my Taurus TX 22 Toro. It was here that I did notice some difference in sounds and flash as well. I expect it has something to do with the short barrel and perhaps some unburnt powder residing. But there was definitely a louder report on my pistol compared to what I am used to. The full-size Anechox 22 suppressor was much quieter, which came as no surprise.
Sound
In general the Pipsqueek sounds fine, even when I used it on handguns where the report was louder I didn’t feel compelled to wear ear protection. On the rifles it was perfectly adequate for general 22 plinking. Especially when shooting subsonic ammunition. The quietest configuration was of course on a bolt action rifle.
Backpressure
There was significantly lower back pressure when I used the Pipsqueek. While shooting with it, I did notice some gas in the face but when I compared it to other full size suppressors it was night and day. This was particularly handy when shooting the bullpup Trek 22’s as the action is right next to your face. Excessive gas is always a problem for bullpup people, like trolls under a bridge.
Cleanliness
The tools provided with the Pipsqueek made it easy to disassemble the suppressor. I usually clean my cans in an ultrasonic cleaner which makes it an easy process. To be perfectly honest, the Pipsqueek is so petite and thin, I’m not sure I’d like to disassemble it very often and risk damaging it.
Pros and Cons
Unbelievably lightweight is probably one of the biggest takeaways here. The Anechoic Pipsqueek is so small and light that you might forget you even had it. It brings a level of pleasure to shooting your rimfire firearms, and without adding excessive blowback gas and debris. It is very well made and coated in your choice of Cerakote colors.
Last Words
I guess I shouldn’t be surprised that this is my shortest suppressor review ever. The Pipsqueek is for sure the smallest can I’ve ever touched, and I was very impressed with how well it took the edge off my 22’s. I for sure prefer it on my rifles for best suppression results, but it can be effective on a whole family of rimfires.