When a company like Sig Sauer jumps into the optics market, paying attention is a must. I was more than happy to get my hands on a couple specimens early on, and I was very happy with my purchase.
The Sig Sauer Tango line of optics is marketed towards precision shooters, long-range shooters, and hunters, as well as tactical marksmen in the LE/MIL community. I’ve been exposed to quite a few good optics in that realm, so I wanted to see how Sig stacked up.
For the purpose of this article, I will be comparing two of the Tango series of riflescopes. One is the Tango 4 which is a 4-16X44, the other is a Tango 6 5-30X56. The comparison will simply be an evaluation as these scopes are peers of different levels and price points.
For starters, let’s look at the features they share, then we will look at them individually.
All Tango series scopes feature Sig’s HDX coated lenses for optimal light transfer, waterproofing, Lock-Down turrets, and one free laser-etched turret that is matched to your custom load data and atmospheric conditions.
Both the T4 and T6 are Front Focal Plane (FFP) optics, which means the reticle is placed after the magnifier inside the scope. This means the reticle will grow and shrink with the magnification setting. I prefer this configuration as it makes reticle usage more uniform, regardless of the power ring setting.
Both scopes are available with the MRAD/Moa milling reticle, or the Mrad/Moa DEV-L reticle, for those that prefer one system over the other.
The T4 and T6 also have the available MOTAC™ (Motion Activated Illumination) that initiates when motion is detected and shuts off when motionless.
The differences between the two scope are probably where most people are going to make a choice. The T4 is a 4X scope, and the T6 is a 6X, the T6 allows a wider choice of magnification from 5X all the way up to 30X. The T6 also has a larger diameter tube, it’s 34MM tube allows the T6 a greater internal adjustment range. To this larger tube is owed the 12 MRAD (30 MOA) per revolution of the turret. The slightly smaller T4 has a 10 MRAD (25 MOA) of adjustment per revolution of the turret. The 4X magnification on the T4 also gives it a shorter magnification range of 4-14, depending on your application these two different ranges of adjustment could make your choice for you.
The T6 that I purchased, also features Sig’s Level-Plex anti-cant system. It is a digital system that uses internal sensors to tell you when the scope is level or not. When engaged (by pushing the outer end of the parallax turret) there are two small illuminated arrows visible through the reticle. You simply adjust the cant of your rifle following the indicators, and when the rifle is level the indicators go dark, showing that the rifle is level. It is a simple and very quick to use system.
On the Range
Shooting the Tango 4 and 6 made me like them even more. The overall clarity of both scopes was very good, and the bright images made target acquisition and spotting hits and misses a piece of cake. Whether in the bright midday sun or in the waning light of evening, I found the scopes presented more than a satisfactory image.
I did find that for shooting groups that I really appreciated the 30 power magnification of the T6, and the DEV-L reticle provided very precise measurements for both corrections and wind holds. The simpler MRAD Milling reticle in the T4 was also very useful for those who might want a reticle that isn’t so busy. And the lower magnification of the T4 made it a great option for my hunting rifle. Lighter, smaller, and easier to quickly bring onto target.
The process of zeroing the scopes, and setting the zero stop was simple, quick, and effective. In no time I had them zeroed, and was dialing them up and down for distant shots. The Level-Plex system on the T6 proved to be very handy in the field, a simple push of a button engages it, and I never had to take my eye off the target. And it turns itself off after a few minutes. I also like the locking turrets on the scopes, raising them unlocks the turret for smooth rotation, and once set, you can push them back down to lock them in place and avoid accidental adjustments.
If I had to say I didn’t like anything about the scopes, it would probably be regarding the sliding up and down of the turret. I have no basis to prove this theory other than feel, but it seems that when the turret is raised it is not as firmly supported. It feels as if you were to knock it against something hard in the up/unlocked position it could be easily broken. Again, I have no evidence to prove that, it is just a simple observation. To be fair it feels rock-solid when it is down in the locked position.
Perhaps the only other gripe I have is likely a simple defect that is easily repaired. The two fiber optic illuminators that indicate the setting on the power ring seemed to be poorly mounted on my T6. One of them came out and was lost, not a big deal, but something worth noting. I usually don’t focus too hard on the actual setting of the magnification ring anyways, I just adjust it till it looks right to my eye, and shoot.
I think that both of these Sig Sauer optics are fantastic scopes, they definitely come in at two different price points so you can pick one the one that best fits your budget. The T4 at its $719.99 MSRP is a great competitor for the sub $1000 FFP Milling reticle scope market, I think it would compete very well against any scope in that group. The larger and much more expensive T6 MSRP $3,119.99 (as tested) is in another group altogether. I would say pending a few more hard trips into the rugged mountains, and it surviving the beating therein, I would put it against any scope in the 2k to 3k dollar range. The quality is there for sure, the only concern I have yet is with durability over time, but so far I have no reason to think it won’t
clear that hurdle as well. It is quite clear that the engineers at Sig Sauer Electro-Optics took great care in every little feature, whether it is the griping surfaces of adjustment knobs, or something as simple as aesthetic angles and accessories. And with an unlimited lifetime warranty, you can confidently put one of these scopes to work today.