The Desert Tech MDRX

Advancing technologies have made every part of the firearm and shooting industry better, with new materials, better production equipment, and a growing competitive market all driving forward it is no wonder that so many new and exciting products are available today. Desert Tech has been pushing those limits since its inception in 2007, and this year they have released another great product that follows the Desert Tech adage Tomorrow’s Weapons.

The MDRX is the next generation rifle from Desert Tech, it builds on the already popular MDR rifle they released in 2016. The MDRX is a short-stroke piston operated semi-automatic bullpup, for those who don’t know already, a bullpup is a rifle configured such that the action, magazine, and firing mechanics are all located behind the trigger. The purpose of this design gives the MDRX a shorter overall length than conventional rifles of the same barrel length. When you add in the other additional features of the MDRX the difference becomes even more apparent.

Features
All Desert Tech rifles are designed with modularity in mind, and as such, they are all available as multi-caliber chassis and barrel combinations. The MDRX shares that same heritage, as it stands at the moment it is available in four different calibers from the factory; 223 Wylde, 308 Win, 300 BLK, and 6.5CM. All four of these barrel conversion kits can be interchanged in the same chassis, making the MDRX one of the few modern sporting rifles to accept both large and small frame calibers. All this from an SBR sized weapon without the stamp.
But if you are a stamp collector like many of us are, you can also get the SBR conversion kit for the MDRX. The 11.5 inch barreled Micron conversion kit makes any MDRX into one of the shortest and compact rifles available. All these conversion kits make the MDRX an extremely adaptable rifle, to whatever mission specific purpose you need.

Being a semi-auto bullpup adds some challenges when it comes to universality, these challenges were overcome with ingenuity. The MDRX is completely ambidextrous, all of its controls are mirrored on both sides of the rifle for both right and left-handed shooters. In addition to the ambi controls, the rifle has a forward ejecting system that sends spent brass casing forward away from the shooter. Previous bullpup designs eject brass to the right side, which in a bullpup is a bad thing if you are left-handed. The MDRX can be fired from the right or left side with no concern of catching hot brass to your face. And if you are a dedicated left-hand shooter, you can swap ejection from forward right to forward left in just a few seconds.
The MDRX comes standard with a compensator made by Desert Tech called The Ratchet, the compensators are caliber specific to provide the best performance in recoil reduction and to stop muzzle rise.

Various MDRX accessories make it an extremely versatile platform

One of the major challenges with bullpups is creating a good clean trigger pull, this is due to the linkage required to connect trigger shoe to the sear pack. This is another challenge that was overcome with design ingenuity, and the resulting trigger feel of the MDRX is widely accepted as great. Of the many people who have pulled the trigger on an MDRX, the common consensus is that it is a good trigger, not just for a bullpup, but a good trigger period.
The MDRX has a six-position adjustable gas valve allowing the operator to tune the rifle to whatever ammunition they might use, as well as use the rifle with a suppressor and a lower gas setting.
The MDRX’s aluminum/polymer chassis construction features full-length upper Picatinny rail, M-LOK slots for accessories and flush-mounted QD sling cups on the rear of the receiver. It is also designed to accept most AR-15 style magazines, and for large frame calibers, it uses SR-25 pattern mags. The rifle ships with caliber appropriate P-mags from Magpul.
The various caliber conversions for the MDRX feature popular twist rates, and standard barrel thread for adding muzzle accouterments. There are also both sixteen-inch, and twenty-inch barrels available in several of the assorted calibers, giving shooters different performance options. And with different barrel lengths, there are two different handguard lengths to go along.
The ambidextrous charging handles of the MDRX are non-reciprocating, they are normally locked to the front in a spring-loaded detent. They can also be locked to the rear by pulling them back and up, the release is as simple as slapping either of the handles down, and the bolt carrier closes into battery. The gun locks open upon firing the last shot from the magazine, the bolt release is centrally located right behind the magwell. This allows for very quick reloads by simply extending the thumb when seating a fresh magazine, thus closing the bolt on a fresh round. This actually can make reloading faster than most AR-style rifles due to fewer steps in the reload process.
The forward ejection system is perhaps the most curious of all the MDRX’s features. The open-faced bolt extracts the spent case and carries it to the rear, as the carrier travels it engages the ejector with a dovetail lug on either side. The momentum of the carrier then pulls the scissor-like ejector out, and it swipes across the open bolt face pushing the spent case off and into the ejection chute opposite. There it is retained by a spring-loaded pawl until the bolt carrier again travels forward where a protruding lug pushes the spent case forward and out the ejection chute. It’s a very interesting system, the only flaw I found with it is that when unloading an unspent cartridge from the rifle, it does require a firm stroke of the charging handles to get the cartridge seated firmly in the ejection chute. This is not so much a flaw as much as it is a training practice needed to be followed. The ejection system is designed to be used on either side of the rifle, both the ejector and chute can be swapped from one side to the other in seconds.

The MDRX SE utilizes a standard side ejection system

Also new for 2020 is a new side ejecting MDRX, for those who prefer a simpler, more traditional ejection pattern. The side eject is available in. 223 Wylde only, and can also be swapped from right to left side ejection. There is also the added benefit of a lighter overall weight, and a less expensive price tag.

On the Range
With several barrels in hand, I took the MDRX into my mountain hide to test its function. I started out shooting with the sixteen-inch 308 Win barrel, and loaded with Fiocchi 150 Grain FMJ ammunition at one hundred yards. After zeroing the sights, I fired a few five-shot groups, which ended up being around two MOA in size.
I continued firing the rifle at several additional targets to see how it ran. I found the recoil to be much softer than the previous similar rifles I had shot, this surely had much to do with the Ratchet compensator. The trigger was very clean and crisp, the reset is quite audible, I attribute that to the highly conductive poly receiver who’s hollow construction makes a very resonant chamber. I fired several additional groups using additional ammunition types as well, American Eagle XM80 as well as some 168 Grain match ammo from both Hornady and Federal. The match grade ammo certainly provided better groups, they averaged right around one MOA.

The MDRX seen with 20 inch 6.5CM barrel and longer handguard

So with several hundred rounds through the rifle, and a respectable shooting and zeroed rifle, I figured it was time to test the metamorphosis of this multi-caliber gifted rifle. The barrel is removed from the MDRX using a five-millimeter hex wrench, the rifle comes with one, but I prefer to use the suggested eighty-inch-pound torque limiter. After removing the handguard via two loosened screws and one take-down pin, the barrel is released by loosening the two barrel clamp screws by about one turn, and then disengaging the barrel lock 180 degrees to allow the barrel to slide out the front of the chassis. The bolt must be locked open to the rear to complete this operation. I then installed the twenty-inch 6.5 Creedmoor barrel, seating it firmly towards the breach. The process is then reversed, turning the barrel lock 180 degrees, and then torquing the two barrel clamp screws to 80 inch-pounds with a torque limiter. Followed by re-installing the handguard, which I had swapped out for the longer one. The rifle had just transformed from a sixteen-inch 308 Winchester into a twenty-inch 6.5 Creedmoor, and I was excited to see the increased performance. The point of impact would not be the same from one barrel to the next, but it was on paper at one-hundred yards, so it only took some minor corrections.
The 6.5 Creedmoor shot very well, with 140 Grain ammunition from both Hornady and Desert Tech, the groups averaged much better, in the sub to half MOA realm. With this kind of accuracy, I couldn’t wait to take the MDRX out to more significant distances.

For several hours the rifle neatly piled up brass right in front of my shooting mat, the rifle never malfunctioned, and just kept eating magazine after magazine of ammunition. I also fired some S&B 140 grain ammo through the rifle without any problems, I would have liked to try some lighter loads like a 120 grain, but I didn’t get the chance.

A typical 5 shot group from the MDRX 223 Wylde 40 Grain Fiocchi (100 Yards)

The rifle is easily swapped to smaller caliber barrels as well, the 223 Wylde and 300 Blackout do require a little more though.
A change of the bolt, a magwell spacer, and a swap of the ejection chute are required in addition to the barrel change.
The 223 Wylde shot just as good as the 6.5 Creedmoor, sub MOA groups were easy when shooting good ammo.

The great performance of the MDRX was hard to deny, it is a very compact rifle, with incredible reach, and good accuracy. Desert Tech has upped the game with this rifle, and they stand behind all their rifles with a lifetime warranty. It would be a great rifle whether you are hiding in a tree stand, need a behind the seat truck gun, or anywhere you’d need heavy firepower in a compact package. Its larger calibers are certainly useful for big game hunting and some distant shooting, while the smaller calibers are great for quick target shooting in a 3-gun style competition or varmint hunting. The MDRX carries a higher than average price tag, but that is because it brings so much more to the table. The multicaliber option alone actually saves money by consolidating your training, and less money spent on optics and accessories. You literally could do almost every American shooting activity with this one rifle. Whether it is a home defense rifle or a suppressed ranch rifle, the MDRX is a do-all rifle if ever there was one.

-CBM

5 thoughts on “The Desert Tech MDRX

  1. Have you used any compensators or brakes other than the Ratchet brake that comes with the MDRX? If so, what have you tried, and what are your thoughts? I know you’ve tested several suppressors on it, I’m more curious about brakes. Thanks in advance.

    Like

    1. I’ve used a couple, including big side vented rifle brakes as well as AR style brakes. I do like the ratchet very much tho. If I wasnt going to use the ratchet i’d probably get a Lantac Dragon. It is very good at reducing recoil.

      Like

  2. I purchased my new MDRX 308 from a the Hub gun shop in Show Low, AZ and it has been nothing but problems. Ejection issues, jams in the chamber and between the ejection plate, the trigger sticks and shows early signs of excessive wear, lightly dimpled primers that don’t go off(normally I’d suggest bad ammo but there is a distinct difference in the dimple on a discharged round and the ones that don’t go off), screws falling out, the ejection port dust cover is falling apart, and the magazine ejects after firing a single shot. The manufacturer is very slow to respond and when they do responde it is usually something along the lines of you need to break the rifle in or we are sending you some parts and you need to send others back for repair. I have 1000 rounds thru the riffle and it is still the most unreliable weapon I have ever owned. I have put a variety of 308 and 7.62 ammo thru the rifle on various gas block settings and just when I think I found something that will shoot consistently, nope! Ironically this rifle, chambered in 308, will not cycle 308 ammo out of the box. I had to put about 400 rounds of 7.62 thru it on the advanced gas block setting before it would cycle 308 with any consistency. With that being said the forward eject panel needs to be removed to cycle 7.62 with any consistency. The 7.62 cartridge frequently miss the eject channel and end up jammed between the bolt carrier and ejection panel. The inexpensive Eastern European 7.62 ammo can get stuck in the chamber if you don’t lub frequently. On higher gas settings the riffle will rip the rims off this 7.62 ammo. Once the rifle is broken in a bit it will cycle some 308 but it really does not like the soft tip 308 rounds. The 308 casings eject consistently with the forward eject panel installed but are more likely to end up with a lightly dimpled primer that does not fire. The 308 cartridge is also more likely to end up with a jam that results in two rounds jammed in the chamber after you rack back the action to eject the unspent round. For some reason unspent 308 rounds tend to get stuck in the bolt carrier.
    In summary, this rifle that is billed as a battle rifle that will shoot multiple cartridges is a bust! I wouldn’t waste the time hauling it into the wilderness on a hunt and certainly wouldn’t bet my life on it. My kids nerf gun is more reliable. It is a seriously overpriced range rifle that is more talking piece than action piece. If you are considering this type of rifle try a different manufacturer.

    Like

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s