One of the biggest questions when buying a suppressor, is selecting one out of the hundreds of options. I’ve been through a bunch at this point in my life, so let me shed some light on the subject for you. What caliber? what configuration? And so many other questions you’ll be asking yourself. With so many options how can you pick one that is best for your purposes? The right answer is that there are always too many good choices to pick only one, but today we are going to look at the subject as a first time suppressor buyer, and a suppressor that might just cover all your bases.
Why the YHM R9?
What makes the YHM R9 a perfect can for an NFA Greenhorn? I’ll get right into it. Todays gun owners come from every walk of life, our modern world has given them overwhelming opportunities for firearms and accessories. That said, there’s a good chance that most firearm enthusiasts looking into a suppressor probably have an Modern Sporting Rifle (MSR) of one kind or another. That rifle is probably chambered in the extremely popular 5.56, or one of the other calibers that are growing in popularity like 300blk, 6.5G, 6 ARC, etc.
The R9 from YHM is ideal for using with any of these calibers, it can suppress large frame cartridges too, like the 6.5 Creedmoor and 308 Winchester. It is rated to suppress pretty much anything under 308 Winchester really, even with limited amounts of full auto. But Wait! There’s more! The R9 is also a perfect fit for a 9mm pistol or carbine, it’s stainless construction is more than enough to retain pressures generated by the cartridge, and other 9mm rifle cartridges like the 350 Legend.
The way I see it, it is pretty damn likely that your apprentice level prospective suppressor purchaser would benefit greatly with an R9. One could swap it back and forth from various rifles, and install a booster and run it on their Glock as well.
YHM is one of many manufacturers that has embraced the uniformity of threads. The threaded rear end of the R9 can be fitted with a direct thread cap (1/2-28 or 5/8-24), or it can fit a Nielsen booster assembly and run with one of various piston manufacturers. It doesn’t end there, it can also use YHM’s Phantom QD system, which allows rapid swapping of the suppressor from various YHM muzzle devices. Further still, the can uses the same threads as other major manufacturers like Dead Air and SilencerCo, so you could also install those devices. I have all three options for my R9, I have both thread caps that I use when shooting the R9 on my precision guns, and I also have the QD mount so I can swap it back and forth on my carbines as well. I run a Rugged suppressors piston inside my Nielson Booster assembly, which makes my Canik TP9 quiet and smooth as ever I could ask.
The R9 is only threaded on the breach end, the rest of it’s construction is solid baffles welded together making it simple and no non-sense. The provided tools allow the user to tighten down the various assorted mounting options, and perhaps more importantly disassemble them after being used.
Shooting with the YHM R9
The very first shots I fired through the R9 were with my pistol. It was the first mounting adaptor in my possession so I went straight to the range to try it out.
The R9 tamed all the sounds produced by my pistol, adding of course its due weight and a bit of added backpressure. But the heavier muzzle sure made the pistol smooth and even more controllable. Shooting the pistol in closed quarters was very tolerable, the sound reduction was everything I’d hoped for, and the function was flawless.
Shortly thereafter I received the 5/8-24 direct thread adaptor, and the R9 went straight to my SRS M2 chambered in 6mm GT. It stayed there for quite some time, hundreds of rounds sent through the R9 from fifty to seventeen-hundred yards. The accuracy of the rifle was if anything enhanced by the presence of the R9, this is typical in my experience. Cartridges like the 6mm GT were easily suppressed by the R9, making precision even more pleasant.
The QD mount for the R9 is perfect for running the suppressor back and forth between rifles. I ran the Phantom flash hider on my 308 carbine threaded 5/8-24. and on my 5.56 chambered carbine I use the Phantom Turbo 556 muzzle brake. This made it easy to swap the R9 back and forth between the two rifles, both of which sounded great when suppressed with the R9. With the gas turned down a notch on both rifles, they functioned perfectly without gassing me out at the breach.
First or Fifth?
Ya, I said first or fifth. The reason I put it that way is because even though I have a dozen or so cans at any given time, the R9 is still an excellent addition to my collection. It is very useful on better than half of my gun collection, and with an MSRP of only $494.00 it is pretty economical compared to many other cans.
I’m at a point in life where I seldom go places without a rifle, and much of the time I have two or three rifles. Having an additional suppressor that will fit most of my rifles makes it an easy choice for me.
If my positivity is hasn’t been obvious enough about my feelings about this little suppressor, let me make it clear; I think this is the perfect suppressor for a first time NFA victim. It has everything most people need, multi-caliber, adaptable, tough as nails, and all at a very reasonable price. If I had to say something about the R9 that I dislike, you’d really have to force it out of me. The only issue I’ve ever had was keeping the thread caps tight, this was almost certainly due to me not tightening them on using the supplied tools as I’m a lazy ass. But I wouldn’t put that at the feet of the boys over at YHM.
So there you have it, the R9 is nearly a flawless purchase in my opinion. Short from needing magnum capabilities or a bunch of machine guns you need to suppress, this is an excellent suppressor for your typical firearms consumer. Best get yourself one.