Introduction

Today we are bringing you another rifle review, and I’m a bit excited about this one. Our subject is the CVA Cascade, which entails quite a few models. The model we are looking at today is the Cascade SB which I assume means Short Barrel. I’ve had the luck of playing with another Cascade in the past, and I quite enjoyed it. So I was excited to see how this newer model performed to see what if anything changed.

The CVA Cascade SB

The Cascade is a bolt action rifle, with a three lug bolt resulting in a 60 degree lift. It has a similar design to the Ruger American action, using the bolt release as a bolt stop to prevent it’s aft travel as well as to keep the bolt clocked properly.

A Remington 700 style trigger is used, and it is fed by a detachable magazine that holds 4-rounds of 6.5 Creedmoor. There is an interesting change from typical bolt-action design; the rear action screw has been placed in front of the trigger, instead of in the tang at the rear of the action.

The threaded eighteen-inch barrel is of a slightly heavier profile than typical hunting rifles, but I am here for it. I like the performance of medium weight barrels over the skinny barrels typically used on hunting rifles.

CVA Cascade Short Barrel 6.5 Creedmoor
Weight	6.8 Pounds
Barrel Length	18-Inches
Barrel Twist	1:8 inches
Barrel Thread	⅝-24
Finish	Graphite Black Cerakote
Overall Length	38.5-Inches
Length of Pull	14-Inches
Capacity	4+1 rounds
Safety	2-Position
Stock	Polymer w/ Veil Tactical Black Camo Finish

CVA Cascade History

CVA is a well known brand among smoke pole subscribers, I can remember hearing about CVA muzzleloaders as far back as I can remember. Connecticut Valley Arms has been around since the early seventies, and before entering the centerfire market had been best known for pioneering inline muzzleloader rifles. Their bolt-action inline muzzleloaders likely had something to do with the Cascade’s development. As it would seem they decided to bring their manufacturing and knowledge to the centerfire realm with the Cascade series of rifles. 

CVA has been aided in their ascent by its parent company BPI Outdoors, who purchased the company just before the turn of the last century. BPI manufactures multiple brands in the same space as CVA, which also adds to their knowledge and position.

CVA Cascade SB Review

As usual, I would take the Cascade up into the Rocky Mountains above my home to test it out. The solitude seems to help focus on the function and flaws of the guns I test. But before we got to that point, I would need to prepare the rifle for this outing. 

First up the rifle would need a scope, I settled on using the Athlon Optics Heras SPR 6-24×56. The rifle had come with some Weaver scope ring bases installed, so I simply bolted up the scope using a set of Warne split rings. With the scope leveled and mounted I boresighted it using my toolless method. Next up I would stick a Harris 6-9 bipod to the front sling-stud for supported shooting. And lastly because I’m a purist, I installed my Banish Meateater suppressor on the muzzle. Before doing so I changed out the suppressor’s muzzle bushing to the smaller 6.5 for maximum suppression. 

I gathered up a variety of ammunition to test in the rifle, with factory options from Federal, Hornady, and Sierra. And again because of the purist in me, I also brought some of my favored handloads to see how the Cascade liked them.

For maximum compactness, I also shot the Cascade with only a muzzle brake installed. For that I used the Patriot Valley Arms 6.5 Jet Blast brake. It is self timing, and very lightweight, which makes it quick and easy to install and remove. And it is exceptional at reducing felt recoil while shooting, even with a modest cartridge like the 6.5 Creedmoor.

Shootability

The oversized bolt handle makes for easy operation of the action. It has a smooth lift and stroke, better I would say than some of the typical comparable actions. There is less slop in the bolt while it is open, giving a much better feel of quality and control. 

It came as no surprise that the trigger felt great, while I saw no reason to adjust it. I like knowing that I can. It’s also nice to know you could swap it out for one of the popular aftermarket triggers like Timney or Trigger Tech.

With such solid construction, the Cascade SB has minimal recoil, particularly with a suppressor or muzzle brake installed. I could see myself adding a stock pack to the rifle, as the comb is a touch low for the scope as I had it mounted.

Reliability

Cycling cartridges through the Cascade was fantastic. The polymer magazine is particularly slippery, which resulted in flawless feeding. So smooth in fact that there is little difference between running the action with or without cartridges. The bolt uses a sliding extractor to pull the cartridge from the chamber, and the single plunger ejector does a fine job of expelling the spent cases from the action. 

While we experienced no malfunctions while shooting the Cascade SB, it did seem that because of the tight fit of the bolt to the action, it was susceptible to crud building up. After shooting quite a bit, some of the debris from shooting did cause the feel of the bolt to suffer a little. Not a huge deal, but worth noting.

Ergonomics

I will say this about the rifle, as I pulled it naked from the factory box, my first impression was different. I wouldn’t say the gun is heavy, but it feels thick and stout. It has a robust and solid feel that delivers a great sensation of quality.

The rubberized exterior is very easy to grip, and feels good in the hands. The buttstock too is very unlikely to slip out of place, as it too has a soft rubber feel. This helped when running the oversized bolt knob, generally there is great purchase on everything. The safety requires a fair amount of pressure to engage, which is fine by me. That makes it harder to accidentally safe the rifle in the heat of shooting.

Releasing the magazine from the rifle is done at the front of the magwell. It was very easy to eject the magazine, I was actually worried it might be too easy, resulting in a lost magazine. But the release is safely recessed to avoid just such a thing.

Accuracy

I had a lot of hope for the Cascade in the accuracy department. I wouldn’t say I was let down, I was just hoping it was going to be a touch better. It definitely liked the Sierra Bullets Match King ammunition, and would regularly print 3/4 MOA five shot groups. I am quite confident that with a little load work up I can get it shooting even better.

As it was, I was using the Cascade SB to engage targets the size of a deers vitals at 300 and 450 yards without a care in the world. It certainly made me wish I was deer hunting with this little rifle instead of just playing.

Value

A quick search of the internet shows the Cascade SB we tested here today can be had for under $650. In my opinion that is a pretty good price for what you are getting. There is a great deal of competition for rifles like this in the four to seven-hundred dollar price range. For a touch more money you can get something very similar like a Franchi Momentum or a Tikka T3. And for a little less money, you can get something like a Ruger American Gen 2. All of these are good choices, and very competitive. I would say that the Cascade seems to match the quality of the higher price point rifles mentioned above, despite its lower price.

Cascade Pros and Cons

Keeping in the same line of comparison with those other comparable rifles, I wish the Cascade had a higher comb to rest your cheek on. Both the Ruger and Franchi mentioned have a high-comb that is perfect for sight alignment. And while 6.8 pounds isn’t heavy in my opinion, the Cascade could shave a little more weight by adding some flutes to the barrel. Some folks might prefer the rifle was fed by AI pattern magazines, and I’ll admit it wouldn’t hurt my feelings. But as good as this magazine works and fits flush, I’d keep it just like it is. 

All three of these rifles can be found at Sportsman’s Warehouse

The action on this rifle feels great, it cycles cartridges smoothly and is built to last. Great trigger and magazine operation matched by good looks across the board on this rifle. There is little not to like about the Cascade, it is compact and great for maneuvering through forests and mountains. And it shoots as good as it looks.

Final Thoughts on the Cascade SB

I was very optimistic about how I would feel about this rifle, and after shooting it for a few weeks now I think those feelings were right. The CVA Cascade SB is a very stout little rifle, it has smooth function with fantastic features for hunters. It is compact and very maneuverable which is handy when you are pursuing anything. It shoots well and has very reliable operation, again, one of the few things I would change if I could would be to flute the barrel to lower weight. But even that isn’t much of a problem. I really like the Cascade SB, and I look forward to taking it into the forests this fall to put it against our mule deer and elk. I expect it will perform very well.

-CBM