Tag Archives: bullpup conversion

sru precision, sruna, sruna-22, sru, bullpup, bullpup chassis, bullpup conversion, 10/22, 10-22, 1022, ruger 10/22, ruger, eotech, vudu, 1-8x24, lpvo, eflx, suppressor, silencer, suppressed, anechoic, pipsqueek,

Next Level 10/22: The SRU Precision Sruna-22 Bullpup Chassis

Introduction

Americans seems to have a love hate relationship with the bullpup firearm design. I have found that there seems to be roughly an 80/20 split between folks that can’t stand bullpups, and those that adore them. I find myself in the latter group, but it did take some convincing to get me there. Even less popular than bullpup’s themselves, are bullpup conversions, turning a traditional firearm into a bullpup. I’ll admit many of them are abominations destined for the smokey pits of hell. But every so often, you’ll find a diamond in the sulfur mines, and today I found something that sparkles. Our topic today is the SRU Precision Sruna-22 bullpup chassis for the Ruger 10/22 rifle.

sru precision, sruna, sruna-22, sru, bullpup, bullpup chassis, bullpup conversion, 10/22, 10-22, 1022, ruger 10/22, ruger, eotech, vudu, 1-8x24, lpvo, eflx, suppressor, silencer, suppressed, anechoic, pipsqueek, shooting rifle supported on harris bipod,

SRU Precision

SRU Precision is the Taiwanese manufacturer of this chassis, as well as several other very interesting products. They claim to have revolutionized 3D printing technology and 3D Weaving technology to create incredibly robust structures.

Bringing their manufacturing skills to the firearms market is both a welcome and interesting development. One of the interesting things about this product, is that it was not made for firearms. In fact it was made for airsoft 10/22 clones, which happen to fit it as well. Having said that, I find the Sruna-22 to be much better quality in both manufacture and operation than most “real” 10/22 bullpup chassis.

Bullpup design often mimics a futuristic look, like something you’d see in a sci-fi movie or a video game. That may not always be a bad thing, especially if you are already the nerdy type who loves bullpups.

The Sruna-22 Bullpup Chassis

Two major components make up the structure of the Sruna-22. There is a one-piece aluminum extruded “upper” receiver, coupled to a polymer “lower”. I use those terms very loosely, as there is nothing in the Sruna-22 that could be construed as a firearm receiver. But for the purposes of this article, it might help using common parlance and terms people are familiar with.

top: attaching the 10/22 action screw Bottom: the separated halves of the Sruna-22, note trigger linkage

A compatible 10/22 rifle is installed in the aluminum upper, using both the original mounting fasteners, as well as additional directional compression screws to center and support the rifle in the chassis. The lower portion of the chassis is mostly polymer, it consists of two-pieces that allow the action to be serviced with minimal disassembly.

sru precision, sruna, sruna-22, sru, bullpup, bullpup chassis, bullpup conversion, 10/22, 10-22, 1022, ruger 10/22, ruger, assembly,
The Sruna-22 uses AR style pistol grips and safety, here you can see the safety detent spring as the grip is installed

The trigger of the rifle is remotely controlled by a wishbone shaped linkage that is surprisingly tight, and even has its own spring dampener to prevent a sloppy sensation. Both the OE safety and an added trigger block safety are incorporated.

sru precision, sruna, sruna-22, sru, bullpup, bullpup chassis, bullpup conversion, 10/22, 10-22, 1022, ruger 10/22, ruger, assembly, disassembly, installing bolt and charging handle,
installing the charging handle and bolt, easily accessed under the action cowling

The entire assembly is impressive, with excellent fit and finish. There is not wobbling or rattling parts, making it feel very professionally made.

Specifications

FeatureSpecification
CompatibilityRuger 10/22 (excluding Takedown models)
DesignBullpup chassis conversion
Upper ConstructionCNC-machined 6061 aluminum
Lower ConstructionPA66 polymer
Trigger LinkageSUS304 stainless steel dual-link pivot system
Overall Length26.3–26.7 inches
Length of Pull14.3–14.75 inches
Weight38.5 ounces (1,090 grams)
Top RailFull-length Picatinny rail
Accessory MountingM-LOK slots at 3, 6, and 9 o’clock
Grip CompatibilityStandard AR-15 pistol grips
Ejection PortRight or Left-side ejection option
Suppressor ClearanceUp to 1.299-inch diameter
Cheek RestEVA foam cheek pad
ButtpadTPU rubber shoulder pad
Additional AccessoriesOptional 11mm buttpad riser
MaintenanceQuick-release design for bolt access and cleaning
Available ColorsBlack, Tan, OD Green, White
Upper AssemblySuspended aluminum construction
AdjustmentSix-directional upper assembly adjustment screws

Unboxing and Assembly

When I opened the box of the Sruna-22, I was blasted with one notice after another, stating that this was a: “Cosmetic Outer Shell for Airsoft Accessories Non-Firing Replica Model”. Literally every word of that description is trying to tell you this isn’t a gun, which makes sense if you are trying to avoid ITAR regulation. This allows the Sruna-22 to be sold and shipped internationally without typical licensing and regulation of arms. Because its made for airsoft. Not for guns.

sru precision, sruna, sruna-22, sru, bullpup, bullpup chassis, bullpup conversion, 10/22, 10-22, 1022, ruger 10/22, ruger, assembly, disassembly, cleaning,

But I was definitely gonna put a gun in there for sure, as I despise tyrannical gun regulations as much as the next guy. I have a variety of different 10/22 rifles, but for this project I was going to use a 16-inch carbon fiber barrel model. And because I am looking out for all you guys, I tried several different triggers to give the best feedback. As bullpup triggers, particularly those tethered to linkage are well known to be trashy.

There is a handy QR code in the box allowing you to open a PDF step-by-step installation of your rifle into the chassis. The design is quite simple and well thought out. All fasteners are included EXCEPT for the ones you will remove from your 10/22 rifle, so hold onto them. I had no issues installing my 10/22 following the directions.

sru precision, sruna, sruna-22, sru, bullpup, bullpup chassis, bullpup conversion, 10/22, 10-22, 1022, ruger 10/22, ruger, assembly, assembly instructions,
included for those that need it

Shooting with the Sruna-22

After installing a few other accessories like my Eotech Vudu 1-8 riflescope in an Area 419 Mount, the Sruna was ready for action. For maximum cool factor I also installed my YHM Phantom 22 suppressor. Later I would swap it out for my Anechoic Pipsqueek suppressor, for an even smaller package.

sru precision, sruna, sruna-22, sru, bullpup, bullpup chassis, bullpup conversion, 10/22, 10-22, 1022, ruger 10/22, ruger, eotech, vudu, 1-8x24, lpvo, eflx, suppressor, silencer, suppressed, anechoic, pipsqueek,

I did notice one thing you’ll want to know. The Sruna-22 does NOT include a pistol grip, so you will need to install one of your own. Which is fine by me, but I did notice that the grip I installed did prevent me from using the larger 25-round magazines. I later swapped out the grip for the Kung Fu grip from DFCO, which gave a slightly different angle and allowed the use of the 25-round mags. Also because I am not just a bullpup nerd, but I enjoy painting guns, I gave the rifle a custom paint scheme.

sru precision, sruna, sruna-22, sru, bullpup, bullpup chassis, bullpup conversion, 10/22, 10-22, 1022, ruger 10/22, ruger, paint, custom paint, cerakote, coating, custom coating,

I did some initial testing at an indoor range to make sure I hadn’t messed anything up during installation. And after some flawless test firing, I figured it was time to take it out into the real world where I normally shoot. Various trips to the range and the wild firing line in the mountains where I spend my time.

Trigger

Most people’s first question is going to be about the trigger. Bullpups and conversions in particular typically suffer in trigger quality because of the linkage systems often used to connect a remote trigger to the sear.

I was quite impressed with both the feel of the Sruna trigger, as well as the design of the trigger linkage. The latter being responsible for the good feel. The dual-linkage applies a uniform pressure with less room for flexing. The quality construction also makes it tight and smooth in its movement. The spring at the rear takes up the slack in the trigger for you. The result is that any slack between master and slave triggers simply feels like a first stage of trigger movement. Followed by a clean break when the trigger releases the sear.

sru precision, sruna, sruna-22, sru, bullpup, bullpup chassis, bullpup conversion, 10/22, 10-22, 1022, ruger 10/22, ruger, eotech, vudu, 1-8x24, lpvo, eflx, shooting a bullpup 10/22

With a standard Ruger 10/22 trigger, I found the pull weight to be more than I would like, but it was still a clean break. After installing an improved trigger of higher quality, it felt much better still, with a lighter pull-weight.

Action

The particular action I used did not have the picatinny rail machined into the receiver. But the Sruna-22 is designed to take both receivers with or without the pic rail. There are two different length receiver set screws to allow room for a pic rail on top.

sru precision, sruna, sruna-22, sru, bullpup, bullpup chassis, bullpup conversion, 10/22, 10-22, 1022, ruger 10/22, ruger, sig sauer, tango msr, 1-10x24,
We also used the Sig Sauer Tango MSR 1-10 scope on this project

Depending on the action you use, there could be a slight occlusion with oversized charging handles. I altered mine slightly to avoid the issue. The removable buttstock portion of the lower, captures your trigger pins and rear action-pin

Controls

Basic 10/22 controls are all intact, with bolt release and safety exposed at the rear of the chassis. I used an extended magazine release which I think is a must have, especially in a bullpup conversion.

Up front there is an additional trigger block safety, it appears to be an AR15 style safety. And it works using the same detent and spring in the pistol grip. The included safety with the Sruna-22 is a polymer one, which I think is perfectly fine. But should you wish to upgrade you certainly can.

The trigger shoe itself is nice, and gives the appears of a quality trigger. The feel of course depends on the actual trigger mounted in the “trunk” of the Sruna.

Reliability/Rigidity

Another concern about bullpup conversions is how rigid and robust the newly configured firearm can be. Rigidity is what allows a rifle to shoot accurately, making it important that the gun is mounted robustly and without inducing uneven stress.

After installing my rifle into the Sruna-22, I found it to be perfectly centered. The Sruna comes with six very small set-screws that can be installed from the bottom and each side in order to stabilize the action in the chassis. I also assume one could use these screws to help center the rifle in the chassis should it be necessary.

sru precision, sruna, sruna-22, sru, bullpup, bullpup chassis, bullpup conversion, 10/22, 10-22, 1022, ruger 10/22, ruger, eotech, vudu, 1-8x24, lpvo, eflx, suppressor, silencer, suppressed, anechoic, pipsqueek, shooting rifle supported on harris bipod,
shooting the Sruna 10/22 supported on a bipod

The construction of the Sruna-22 seems as good as most any comparable quality firearm. The picatinny rail on top runs the full length and is thick enough to avoid significant deflection. Polymer parts of the chassis feel very high-quality and interface between the two is great.

If I had to come up with something I didn’t like about the design it would be these two things. While I love the quick removal design of the action-cowling, the locking pin is a little easy to pull out. Possibly knocking it out could happen if you were very active with the rifle. Also, the single point attachment means the front end of the cowl isn’t perfectly secure. Both of these gripes are small, and nowhere near a deal breaker for me. I used blue Loctite on the screws that hold on the end-block at the rear of the chassis, as they seemed to have minimal engagement.

sru precision, sruna, sruna-22, sru, bullpup, bullpup chassis, bullpup conversion, 10/22, 10-22, 1022, ruger 10/22, ruger, trigger, sear pack, trigger installation,
the trigger assembly is easily removed in seconds for service or cleaning

Accuracy

As I mentioned above, accuracy is greatly affected by the rigid mounting of a firearm. So ensuring you mount the rifle properly in the Sruna-22 is important if accuracy is part of your plan. That said, I don’t think the Sruna is going to make your rifle MORE accurate than it was prior to installing it. If your 10/22 shots sub-MOA before, it will likely shoot sub-MOA in the Sruna. I suppose it is possible that some rifles may shoot slightly better with their barrels free-floated in the Sruna-22. My rifle shot around 1 MOA at 75 yards, which is certainly good enough for my purposes with this rifle.

Ergonomics

Bullpups have several advantages in the ergonomics department, though many of them fail at it. The Sruna-22 feels quite comfortable, using AR15 grip and angles makes the rifle familiar to most shooters. It’s small recoil pad has rubber ribs, which seem more for anchoring the buttstock in your shoulder pocket than recoil mitigation. The length of pull can be added to using spacers, though I found it unnecessary. I would rather leave it as is, so that when my kids want to shoot it they find it comfortable.

the Sruna-22 ergonomics are very much like an AR15

With M-Lok slots all over the handguard, you can surely attach any grip accessories you chose. The stick-on cheek pad is a nice addition, though I didn’t install it. I am hard on stuff, and foam pads like that end up getting torn up when hiking through brush.

Cleaning/Serviceability

SRU Precision really thought this product through. Cleaning a 10/22 action can be challenging when mounted within a bullpup chassis. But the Sruna-22’s quickly removed action-cowling makes it possible to remove the sear-pack, bolt and operating rod with no tools in just a few seconds. Faster even than the factory configuration, as you do not have to remove the action screw to gain access to the action. This makes cleaning your rifle while in the Sruna-22 quite easy

sru precision, sruna, sruna-22, sru, bullpup, bullpup chassis, bullpup conversion, 10/22, 10-22, 1022, ruger 10/22, ruger, disassembly, cleaning, service,
by simply pulling one pin, the whole action cowling comes off, giving you quick access to service the rifle

Pros and Cons

The few cons I mentioned above are small concerns when measured against all the benefits the Sruna-22 offers. I think the pros far outweigh the cons, making this an easy choice.

High quality constructionAction-cowl might be too easy-access
Excellent fit and finishMinimal fastener engagement
Compatible with many 10/22 models
AR15 grip compatible
Easy cleaning and serviceable
Great trigger linkage
Receiver support screws
Excellent ergonomics
Great balance
Concise included instructions
Available worldwide
sru precision, sruna, sruna-22, sru, bullpup, bullpup chassis, bullpup conversion, 10/22, 10-22, 1022, ruger 10/22, ruger, eotech, vudu, 1-8x24, lpvo, eflx, suppressor, silencer, suppressed, anechoic, pipsqueek, shooting suppressed bullpup 10/22 standing in mountains,

Conclusion

I have handled more than a few bullpup conversions for the 10/22, and while I don’t hate them all, this one is BY FAR the best one I have ever handled. It brings the balance and compact design of the bullpup to the 10/22 without giving up on quality. It actually feels like a complete firearm, not a conversion. I find it both fun and pleasant to shoot, all while looking fantastic. If aliens ever come to speak with us, and I had to decide which bullpup conversion 10/22 would represent humanity to our potential overlords, it would surely be the Sruna-22.

-CBM

For more rimfire projects, click here