Tag Archives: continental

Medium Power Precision: The Vector Optics Continental 3-18X50

April 20, 2026Optics, Product review3-18x50, continental, medium power, riflescope, scope, vector, vector opticscoldboremiracle

Introduction

With age and time, most of us develope a larger and more refined collection of firearms. If you are rifleman like me, that means your scope inventory also develops as well. I love mid-range scopes like the 3-18 and 4-16 power range, so I have worked towards adding more of them to my inventory. Today I share one of those with you; the Vector Optics Continental 3-18X50 precision rifle scope. I am no stranger to this line or Vector Optics, my experience with other scopes is what inspired me to get this one.

The Vector Optics Continental 3-18X50

Vector Optics Continental line of scopes all incorporate most of the desired precision rifle features. The 3-18 Continental is no different, it comes with many of the things precision rifle shooters are after.

vector optics, continental, 3-18x50, adjusting magnification

Inside the Continental you’ll find the FFP VCT-34 Reticle, a Christmas Tree style reticle with a broad grid for holdovers or making corrections. Of course it is illuminated because this isn’t 1998. The reticle is matched by a set of turrets perfect for making corrections. With 10-MRAD per rotation you get plenty of mechanical adjustment, the 1/10 MRAD clicks are very tactile and can also be heard. Both turrets can be locked by pushing in, and the elevation turret features a pop-up pin indicating which of the three revolutions you are on.

bergara, premier canyon, vector optics, continental, 3-18x50, suppressed, shooting with pine trees and slopes behind, — testing the Vector Continental 3-18 aboard the **Bergara Premier Canyon** rifle, outfitted with a YHM R9 suppressor

With its large 34mm tube, this scope has 44 MRAD of mechanical travel within. More than enough for what most folks will be doing with this scope. And it’s 50mm objective is still fairly compact, allowing the scope to be mounted low.

All the control surfaces feature a nice texture, allowing quick and easy adjustments to be made. The diopter at the rear sharpens focus on the reticle, and the adjustable parallax on the side allows you to sharply focus your targets.

Specifications

Magnification:	3-18x
Objective Lens Dia.:	50mm
Ocular Lens Dia.:	42mm / 1.7 inch
Ocular Lens Length:	54mm / 2.1 inch
Exit Pupil:	8.0-2.8mm
Optics Coating:	VePro Fully-multi coat
Field of View:	40.8-6.8 feet @100 yards
Eye Relief:	100mm / 4.0 inch
Length:	338mm / 13.3 inch
Weight:	820g / 28.9 ounce
Tube Diameter:	34mm
Click Value:	1/10 MIL
Elevation Range:	44MIL
Windage Range:	16MIL
Side Focus:	10 Yds to infinite
Reticle:	Etched glass VCT-34FFP
Illumination:	6 Brightness Settings
Battery Type (Not Included):	CR2032
Focus/Parallax mark:	10,15, 20, 30, 50, 100, 200, 300, 500 and infinite
Including items:	34mm Picatinny high rings (default) rings, spare common elevation turret, sunshade, instruction, lens cover and a cleaning cloth

The extra included items drive the value of this scope up significantly. It comes with an extra elevation turret that you can swap out should you not wish to use the zero-stop and revolution indicator pin. A nice pair of scope rings, a shunshade and more. All boxed up nicely in an impressive package.

vector optics, continental, 3-18x50, rifle scope, unboxing, — Unboxing the Continental 3-18×50

I wasted no time mounting the scope, as I wanted to bring it along on one of my next shooting trips. The Vector rings that come with the scope are great, and look much better quality than the typically included rings. But, for the way I was mounting this scope they were a bit high. So instead I used a set of low Vortex 34mm rings.

vector optics, continental, 3-18x50, rifle scope, mounting, scope rings, scope mounting,

With the scope set inplace and torqued, all that was left was to boresight the scope prior to heading to the range. My tool-less boresight method is easy and you can read more on how to do it here.

On the Firing Line

Once I’d made it to a firing line, it was time to zero the scope. This was pretty easy after having boresighted it. In just a few shots, I had a good zero on the rifle, and it was time to set the turrets back to zero. This is done using either a coin or even better is the included plastic tool. this prevents you from marring the finish, and overtightening the turret fastener.

Vector Optics, continental, 3-18x50, rifle scope, turret, zero-stop, battery, illumination — Left; zero-stop setting. Top right: Unlocked elevation turret with indicator pin extended showing third revolution. Bottom Right: battery compartment installing the CR2032 lithium

With the rifle already zeroed, I also decided to set the zero-stop at the same time. This is done by removing the elevation turret, and looking at it from underneath, you turn the ring inside in the indicated direction until it stops. A tiny spring-loaded pin pops into a small hole on the inner ring, which is what stops it when you turn it. If you are using a canted scope base to get more use out of your scope’s elevation, you may need to push the little pin in allowing you to counter rotate the inner piece so you can set the turret below where it comes zeroed from the factory. For more on canted bases and why, go read this.

bergara, premier canyon, vector optics, continental, 3-18x50, suppressed, suppressed rifle sitting on a shooting bench with accessories, athlon chronograph, — the **Bergara Premier** test rifle, seen here testing velocity with the **Athlon Rangecraft chronograph**

Once the zero-stop was set, I reinstalled the turret on zero. Giving me maximum sweep of the scopes internal movement for my corrections. You could also swap out the turret for the non-zero-stop elevation turret, if thats what you prefer.

Optical Quality

Like the other Vector Continental scopes I have used, this one had a great picture. According to the companies website, they use Schott HT lenses with their own proprietary coating. I expect that is why they look so good. Not only are the images bright and clear, but there is excellent uniformity. There are no abberations around the edge of the image.

vector optics, continental, 3-18x50, reticle, illumination, — a couple different perspectives looking at the reticle, note only center of reticle illuminates (left)

The adjustable parallax in this scope allows you to get both the reticle and target sharply defined. This is a very important aspect of shooting, particularly at further distances. For more on that topic, read: All you need to know about parallax. I guess the easiest way to describe the imagery in this scope is; it looks way better than you’d expect with this price point.

bergara, premier canyon, vector optics, continental, 3-18x50, suppressed, shooting prone high in the mountains

Reliability

Mechanical integrity is important for precision shooting, and this scope is very repeatable. Dialing the scope across its entire elevation range is smooth and consistent. Running boxes using the turrets show it returning back to zero every time. And as a FFP scope its also important that the turret movements match the values on the reticle. Measuring movements with the reticle and dialing the correction with the turret show the values match. At least close enough to not to notice any difference.

This is not my first Continental scope, and my others have proven to be very durable. Surviving plane trips, bouncing around in vehicles and off road vehicles. Freezing temps and the damp heat of the gulf coast. I try and avoid physical abuse of my scopes, but they do get used a lot. I have every confidence that this scope, like the others will last a long time. If I was to improve anything about it durability, it would probably be the finish. It is a little easy to scratch.

bergara, premier canyon, vector optics, continental, 3-18x50, suppressed, shooting a suppressed rifle across a wide canyon filled with snowy pine trees,

Value

I keep finding myself repeating something along these lines when it comes to these scopes; I cannot believe I paid two or three times as much for scopes in the past that aren’t even close to as good as these ones (as far as features).

The optics market has been absolutely flooded with good, great and outstanding products that cost half or less than what I used to pay for good rifle scopes a decade or two ago. You can bounce over to Optics Planet and pick this scope up for a mere four-hundred and eighty-five dollars. And if you use my discount code coldbore at checkout you can even save an additional 5%.

Pros and Cons

There is plenty to like about this scope, as I’ve already mentioned. There is one drawback to this scope, and for some its a big one. A huge majority of optics are being manufactured overseas and much of them in China. For some of you that might be a deal breaker, and for others it may not be. Rest assured though, the Chinese have upped their game significantly .

vector optics, continental, 3-18x50, adjusting windage turret,

As if all the things I’ve already mentioned about this scope weren’t enough, the added value is incredible. You can buy these same included scope rings for $20 on Optics Planet, which seems really cheap. But I must say they are great looking cheap scope rings, had I not known I would have said they were at least 50-60 dollar value. And the new ones they are shipping now use the dual torx screws to secure the foot, instead of the single 1/2-inch nut. The included sunshade is also a very nice touch.

Last Thoughts

Much like my experience with my other Vector Continental scopes, this one has been an excellent experience. I could see myself putting this scope on any of my hunting rifles as you’ve seen here, or on a precision rifle that can take full use of its faculties. The medium power magnification of the Vector Continental 3-18×50 gives dexterity in use, without giving up long-range features and sharp imagery. I look forward to putting this scope to work, and I will update it as my experience continues.

-CBM

Check out other Vector Optics, as well as other scope reviews here

Vector Optics Continental 6-36X56

August 9, 2025Optics, Product review34mm, 6-36x56, continental, riflescope, scope, vector continental, vector opticscoldboremiracle

Intro

Without a doubt the US sport optics market has been inundated over the last decade, with a plethora of manufacturers and importers. One of the many companies doing an impressive job at it is Vector Optics. I have had an opportunity to review a couple of the optics now, and I’ve been impressed. So today I bring you a fresh look at another riflescope, the Vector Optics Continental 6-36×56.

The Continental 6-36×56 Rifle Scope

Like the rest of the Continental strain, this one uses a 34mm main tube. The large 56mm objective lens is the standard for long-range precision optics. And the Continental comes with other features that have become the gold standard for precision shooting optics. Exposed adjustable turrets with 10 MRAD per turn, adjustable side focus/parallax, an illuminated milling reticle and more.

Specifications

Magnification	6-36x
Objective Lens Dia	56 mm
Focal Plane	First Focal Plane
Eye Relief	100 mm / 4.0 in
Lens Coating	Fully Multi-coated
Linear Field of View @ 100 yd	21.6 – 3.6 ft @ 100 yards
Linear Field of View @ 100 m	7.2 – 1.2 m @ 100 meters
Angular Field of View °	4.13 – 0.69 °
Reticle	VEC-MBR2

Tube Dia	34 mm
Side Focus	15 yards to Infinity
Click Value	1/10 MIL
Turret Function	Zero Stop, Turret Lock
Elevation Adjustment Range	≥ 31 MIL
Windage Adjustment Range	≥ 18 MIL
Diopter Compensation	-3 to +2
Illumination Setting	11 brightness settings, On/Off between each
Battery Type	CR2032
Waterproof	IP67
Fogproof	Nitrogen Filled
Shockproof	1000 G
Housing Material	6061-T6 Aluminum Alloy
Finish	Matte Black
Length	404 mm / 15.9 in
Weight	861 g / 30.4 oz
Items in the Package	User Manual, Plastic Wrench, Cleaning Cloth, Sunshade, Flip-up Caps, Spare Turret, 34mm Picatinny Rings, etc.

desert tech, srs m2, vector optics, continental 6-36x56, prs, competition, snipers hide cup, — after many months of hard use and even some competition, the Continental continues to perform

Also like other Continental scopes, this one comes with some added value items as well. Things like a sun shade and Vector 34mm rings. While based on the price I suspect they are fairly simple rings, but they are perfectly suitable for this scope, and don’t look like the cheap throwaway option often included. The packaging also is high quality, giving a great impression.

Vector optics, continental 2-12x44, riflescope, rings,

Another nice thing included with the scope is an extra elevation turret. The second turret doesn’t include the zero stop feature, which allows a full sweep of the erector.

Vector optics, continental 2-12x44, riflescope, turret, — the **Continental 2-12×44** uses the same turret system

Mounting the Continental 6-36

I chose to mount the Vector Continental in an Area 419 scope mount. Not that the rings weren’t suitable, I just like the Area 419 mount significantly more. With a snug fit, the Continental was then attached to my Desert Tech SRS M2. A rifle I use quite frequently.

Adjusting the mounting location to set the proper eye relief, gave a nice comfortable fit and clear image. I adjusted the diopter at the rear to get the best image of the reticle, and also added the sun shade. This is something I often do if for nothing else, to keep things away from the lenses of my scopes.

Zeroing the Scope and Zero-Stop function

My Desert Tech SRS M2 rifle has a 30 MOA cant built into the picatinny rail, this is by design to allow zeroing the scope closer to its mechanical zero. This required me to dial the elevation turret below its centerline.

the zero-stop system is easy to set and robust in design

The zero-stop feature is built into the elevation turret. It uses an indexable stop that also actuates an indicator pin on the top of the turret. When the turret is rotated past its first rotation (10 MRAD), a red pin pops up on the top of the turret. And when it is rotated past the second rotation (20 MRAD) the pin pops up a bit further exposing a silver ring under the red. This allows both a visual and tactile indication of which rotation of the scope you are on.

Since I had to zero the scope below its factory zero-stop setting, this required me to dial back the zero-stop. This is done by removing the elevation turret, and underneath there is a small pin that you push in, and then rotate against the indicated direction approximately the distance you need.

I could then boresight the scope and rifle per my traditional practice, prior to taking the rifle to the range for zeroing. Once the rifle was zeroed, I could reset the zero-stop feature. By again removing the turret, and rotating the inner ring (in the indicated direction) until the pin pops into its stop hole. And then set the turret back on the scope lining it up with zero.

Shooting with the Continental 6-36

I use my SRS for quite a bit of shooting, which makes it very familiar to me. Shooting the rifle with this Vector Optics scope would be an exercise in repetition. I’ve run a variety of very nice scopes on this rifle, so seeing how the Vector stood-in would be a good comparison.

My first shooting experience with this scope was shooting paper targets at a mere one-hundred yards. The impressively bright image through the scope made for some very easy shooting. Using the fine points of the reticle was great for precise placement of shots.

vector optics, continental, 6-36x56, long-range riflescope, ffp, mil, mrad, illumination — initiating the reticle illumination shows that only part of the reticle is illuminated. This helps avoid having too much light when looking into darkness

The majority of my shooting takes place in open country at high altitude in the Rocky Mountains. I do a lot of varmint hunting and long-range shooting, which would also make an excellent task to test the legs of this scope.

One of the benefits of using this rifle, is that I have some very established drop data. This allows close evaluation of the scope compared to others I’ve also used.

**this rifle** and scope combination is great for shooting from my **Two Vets Tripod**

Optical Clarity

Vector Optics uses Schott lenses from Germany, which is likely responsible for the impressive clarity. Looking at small animals and other details even at long-distances gave very definitive identification. As well as spotting impacts, things like dirt flying and bullet splash were quickly identified through the scope.

desert tech, srs m2, vectore optics, continental 6-36x56, prs, competition, snipers hide cup, — I recently used the **Continental 6-36** on my **Desert Tech SRS M2** chambered in 6GT for the Snipers Hide Cup match

Across the broad magnification range, the scope kept its clean image. As is typical, at maximum magnification the brightness of the scope is reduced somewhat. I have experienced this phenomenon with almost every scope I’ve used, it’s normal and simply something to be aware of. The beauty of these higher magnification scopes is that if you run them at slightly less than maximum power, they look fantastic and still have adequate zoom.

vector optics, continental, 6-36x56, long-range riflescope, ffp, mil, — the magnification adjustment ring is smooth, with a 180 degree turn

I also noticed another anomaly that I have seen on some scopes; When using a canted scope base for long-range shooting, the scope’s erector is typically moved closer to its limit of travel. At the low end of the magnification spectrum, this can sometimes result in a crescent shaped shadow appearing along the top of the image. So far as I can tell it has no effect on performance, and isn’t visible when you zoom the scope in even a little bit.

vector optics, continental, 6-36x56, long-range riflescope, ffp, mil, mrad, — installing the CR2032 lithium battery

Parallax Adjustment

Removing parallax from the image is done using the side focus turret. It is labeled for various distances and as usual they are more of a guide than an exact amount. I did notice that parallax balance was easy to achieve at nearly any distance I tried. This is an important feature for any rifle scope used for long-range shooting, if you are curious about why you should read all you need to know about parallax.

Turret Function & Tracking

One of my favorite features of the Continental scopes is the turrets. The turrets have ten MRAD of elevation per rotation, and are labeled with whole and 1/10 graduations. The turrets are locked using a push/pull feature, when pushed down they snap into a locked position. Pulling them up unlocked them allowing adjustments to be made.

Once the zero-stop feature had been engaged, the turret has a hard stop at zero. This allows you to dial your scope back to zero without even looking at it. The audible clicks also allow you to make small adjustments by simply feeling each click or hearing them.

After zeroing my rifle and setting the zero-stop, I found the Continental still had a total of nearly two-and-a-half turns of elevation. That is 28.5 MRAD of elevation, which is plenty for most long-range shooting scenarios. This is also in part because of my 30 MOA canted scope base.

Testing the values of the turret clicks closely matched the amounts measured with the reticle. Additionally, the known shooting DOPE for the cartridges I was shooting matched up in the Continental.

Reticle

Speaking on the reticle; the VEC-MBR2 reticle has a great deal of features. It uses what many have called a Christmas tree shape, because of the familiar shape of the holdover grid. While I am not as big a fan as other of this type of reticle, I can surely see its utility. With the ability to quickly hold-over your target, or measure corrections easily, this reticle gives you options. With a ranging bracket and several open spots with tiny center-dots it gives you precision where you want it.

Pros and Cons

There is a lot to like about this scope. If the bright imagery and clarity aren’t enough to get you excited, then robust turrets and their function should. This scope envelops most if not all of the popular features for long-range shooting and it still comes in well under the $1000 price point. With great included accessories and all these features the Vector Continental 6-36×56 is a great deal. And they come with a great repair or replace warranty that matches the standard for quality optics.

vector optics, continental, 6-36x56, long-range riflescope, ffp, mil, mrad, Desert Tech, SRS M2, anechoic, anechox 35 suppressor, — besides the Continental scope, this rifle incorporates an Anechoic 35 suppressor, and **Atlas Bipod**

If there is a downside to these scopes, I suppose many would say it is it’s source. As Americans we like to buy products from our fellow compatriots, or at a minimum from our friendly allies. Vector Optics come from China, which might be reason enough not to buy them for some. If you don’t mind the spawn-point, you will find an affordable option with excellent performance. After months of use and comparing the scope to others like Kahles and Nightforce, the optical quality isn’t quite as good. But that is no surprise considering those optics cost four or five times more.

vector optics, continental, 6-36x56, long-range riflescope, ffp, mil, mrad, Desert Tech, SRS M2,

Concluding Thoughts

I have been very happy with this line of riflescopes, and I expect to keep them busy for years to come. It is very impressive how much value you get from these scopes, and it definitely has shown how the Asian optics manufacturers have upped their game. Had I not known where these scopes came from, and if they’d had the branding of a European scope, I might have believed they came from Germany or something. So if you have filet mignon taste, but a bowl of rice budget, you might find these scopes fit right into your shooting plans.

-CBM

Click here for more Riflescope Reviews

Vector Optics Continental 2-12X44

July 17, 2025Optics, Product review2-12x44, continental, lpvo, vector, vector optics, vector optics continentalcoldboremiracle

Preface

You may have seen my past reviews of other Vector Optics, but today we are diving into another one. This time we are looking at the Vector Optics Continental 2-12X44 riflescope, I think this one fits into a very niche purpose. Its almost a low power variable optic (LPVO) by some standards, and yet it shares some of the long-range features of the other Continental scopes. But will this medium power scope fit into one purpose or the other? Let’s find out together.

Vector Optics Continental 2-12

Lets get one thing out of the way, foreign made optics have taken up a massive share of the market. A huge number of them are coming from China, Japan and the Philippines. Whether we like it or not that is the way things are going, and since it’s spoiled us for choice there is a positive side. Vector Optics are made in China, and I’ve mentioned before that these Continental scopes have made a strong case for changing our perception of what made in China means.

Vector optics, continental 1-12x44, riflescope, desert tech, quattro 15, aero precision, quadmag 53,

The 2-12 is built on a 34mm maintube. Most scopes in these lower power ranges use a 30mm tube or perhaps even the smaller 1-inch tube. This scope like the other Vector’s I’ve tried is a first focal plane design, which means the reticle changes size with the power magnification.

The reticle is moved inside the large erector housing using the exposed turrets. Both turrets have a push/pull locking feature to prevent unwanted movement. And both are graduated in MRAD with 1/10 MRAD clicks and a total of ten MRAD per rotation.

The adjustable parallax is another nice feature, and one that is paramount for shooting long-range (you can read about why HERE). Additionally, there is illumination for the reticle which is stacked on top of the parallax adjustment knob. This makes the milling reticle even more useful in scenarios where light might not be adequate.

Specifications

Magnification	2-12x
Objective Lens Dia	44 mm
Focal Plane	First Focal Plane
Eye Relief	100 mm / 4.0 in
Lens Coating	Fully Multi-coated
Linear Field of View @ 100 yd	62.4 – 10.8 ft @ 100 yards
Linear Field of View @ 100 m	20.8-3.6 m @ 100 meters
Angular Field of View	11.92 – 2.06 °
Reticle	VET-CTR 2 Etched Glass

Tube Dia	34 mm
Side Focus	10 yards to Infinity
Click Value	1/10 MIL
Turret Function	Zero Stop, Turret Lock
Elevation Adjustment Range	≥63 MIL
Windage Adjustment Range	≥30 MIL
Diopter Compensation	-2 to +2
Illumination Setting	11 Gears, On/Off Switch
Battery Type	CR2032
Waterproof	IP67
Fogproof	Nitrogen Filled
Shockproof	1000 G
Housing Material	6061-T6 Aluminum Alloy
Finish	Matte Black
Length	317 mm / 12.5 in
Weight	767 g / 27.1 oz
Items in the Package	User Manual, Cleaning Cloth, Plastic Wrench, Lens Caps, Spare Elevation Turret, sunshade, scope rings

Unboxing the Continental 2-12

Unfortunately, my package was mistreated during delivery which resulted in some damage to the box. But after close inspection the packaging was very good at protecting the scope and its accessories inside.

Inside the box, there is the scope, a sunshade, a set of 34mm rings, an extra elevation turret (for use without zero-stop). As well as the owners manual, lens cloth, a tool for adjusting the turret, and a battery. It was a very nice package before it was damaged.

Mounting Solution

I really appreciate the included rings with these Continental scopes. Often when rings are included they look so cheap you don’t dare use them. These ones on the other hand look very adequate for a scope like this.

Even so, I chose to use a different mounting solution for my initial purposes. I grabbed a Zro Delta cantilever 34mm scope mount, it would allow proper mounting and eye relief on different rifles. The strong oversized screws give robust even clamping.

With the scope mounted in the Zro Delta mount, I attached it to the picatinny rail of my rifle. This rifle is a hybrid made from an Aero Precision upper and a Desert Tech Quattro 15 lower. After which I did a quick boresight job to get it on paper at one hundred yards.

Shooting with the Vector Continental 2-12

My first outing with the Continental 2-12 was to a rifle range. With a target hung at one hundred yards, I fired a few shots to see where they impacted. With the rifle resting securely on sandbags, I measured the distance from my point of aim to the impacts using the reticle. And dialed the correction with the turrets before firing another shot. That shot landed right where I expected it to, and drew smug chuckle out of me.

Using the scope at 12X I fired a few groups at the 100 yard target. I was quite pleased with how sharp and clean the image was, and at that high power setting the outer ring of the reticle is not visible. Leaving only the center part of the reticle with all its details.

Round Two

For a little more long-range testing, I chose to mount the Continental 2-12 on the Bergara Premier Canyon 308 Winchester. For that I did use the rings that came with the scope, and mounted it to the pinned picatinny rail of the Bergara.

Vector optics, continental 2-12x44, riflescope, turret, bergara, premier canyon, tripod — shooting the **Bergara Premier Canyon** rifle with the Banish Backcountry suppressor

I’d take the rifle into the mountains to see how the combination would perform in more open country. I really liked this setup to be honest, it made an excellent lightweight hunting rifle. The accuracy of the Bergara paired with the sharp images of the Vector made for fast and sharp shooting.

The wide angle of view at low power was excellent. If I had to take a quick shot at a running animal up close, it was ideal. And being able to zoom the scope into 12X made making precise shots very doable. I did find that most of the time I was shooting, I rarely took it below 5-6 power. Mainly because in this open country everything is far away.

Vector optics, continental 2-12x44, riflescope, turret, FFP, reticle — The VET-CTR 2 reticle seen at 12X left, and 2X right. When illuminated the outer ring and center most ring are lit.

Vector optics, continental 2-12x44, riflescope, turret, FFP, reticle, illumination, — illumination setting 9 out of 11 as seen at 5X

Zero Stop

Setting the zero-stop requires use of the turret with the red pin. Once the rifle is zeroed, you can remove the elevation turret using the plastic included tool. Underneath the turret, you rotate the inner ring of the turret clockwise until it stops. There is a small pin that snaps into place, you can then install the turret at zero. The turret then will stop at zero every time you wind down the turret.

If you don’t want or require the use of the zero-stop feature, you can remove that turret and install the other. With the zero-stop set with my one-hundred yard zero, the scope had 29.5 MRAD of elevation left for elevation. That’s more elevation than most folks are going to need with a scope like this.

Turrets

Like the other Continental scopes I’ve used, these turrets are fantastic. The clicks are very crisp and audible, making it easy to adjust even without looking. The push/pull locking feature is also very nice, making it easy to prevent unwanted movement of the turret.

With 10 MRAD per rotation, a lot of my shooting might not even require hitting the second rotation. But the pop-up indicator is excellent for showing you which rotation you are on. The red button pops up when you hit the second rotation, and it pops up even further exposing a silver ring when you hit the third rotation.

The parallax adjustment is easily read from the shooting position, and has perhaps a touch more resistance than I would like. But it is perfectly serviceable. The 11 position illumination knob has off settings between each power setting. The texturing on all control surfaces is great for purchase with fingers or gloves.

Optical Performance

The large tube does a great job of passing the image to your eye. The 44mm objective while smaller than some precision optics is still more than adequate at compressing the landscape into a bright and clear image.

Vector optics, continental 2-12x44, riflescope, turret, bergara, premier canyon, tripod, two vets tripod, no name, — steady shooting off my Two Vets No Name Tripod made clear and precise use of the reticle

The HD lenses used in these scopes are pretty impressive considering their price point. I found picking out tiny holes in paper to be surprisingly easy, and seeing the movements of small animals two and three hundred yards out to be suitable for precise identification. I found this scope to be impressive considering it’s only a 12X, engaging targets as far as 1000 yards would still be quite doable. And with all that elevation and precise parallax there’s no reason not to.

Browning, x-bolt, x-bolt 2, x-bolt speed, 308 win, vector optics, continental, 2-12x44, banish backcountry suppresor, — I’ve also tested the Continental 2-12 on the Browning X-Bolt 2 308, shooting easily out to 1000 yards

Pros and Cons

Because I am a bit of an enthusiast for long range shooting, I think one thing I would change would be the ring around the reticle. With that said it is handy when trying to shoot using low power settings, because the center part of the reticle becomes very fine and harder to see. This appears to be by design, at 2X you have a ring and a center dot when illuminated. Its like looking through an Eotech in that scenario.

deer hunting, mule deer, kids, children, browning, x bolt 2, 308 win, vector optics 2-12x44, banish backcountry suppressor, — this combo worked out great to take this young buck from 470 yards

Twelve power isn’t a lot, but it is plenty for much of the shooting I do. I think this scope is an excellent choice for a hunting rifle or a fast action carbine. It has excellent clarity, a good reticle, and an impressive erector range allowing for broad corrections when shooting long-range. The turrets are excellent, the image is fantastic, and removing parallax with the focus knob is simple. There is really very little to take away from this rifle scope.

Last Words

As with the other Vector Continental scopes I have used, this one seems to be a hit. Whether on one of my carbines or a hunting rifle it performed exactly as I hoped it would. And when you consider the price point of this scope, with a street price of only $499 it is hard to pass on it. I would feel absolutely confident in taking this setup on one of my big game hunts, or a shooting competition. If you are looking for a scope in this range, you’d be injudicious for not at least taking look.

-CBM

Vector Optics 1-10×28 Continental Rifle Scope

April 29, 2025Optics, Product review1-10, 1-10x28, continental, lpvo, Optics, rifle scope, vector opticscoldboremiracle

Preface

I am always on the search for the perfect low power variable optic (LPVO), I find them optimal for medium range carbines. And lately, I’ve been on a big medium range kick. Today we are taking a look at a new to me LPVO with some great potential, that scope is the Vector Optics 1-10X28 Continental. The Continental is a 1-10 first focal plane (FFP) scope with a MRAD reticle and 10 MRAD turrets. After a quick look, I felt quite confident I was going to enjoy this scope, but how well could this scope made in China perform?

Vector Optics Continental

The Continental series of optics from Vector feature 34mm tubes, and an impressive erector and turret structure. As a 10X variable, the magnification ring rotates approximately 180 degrees to go from 1X to 10X. The locking turrets give 10 MRAD per rotation with 1/10th MRAD clicks, with very audible and tactile clicks.

The elevation turret also features an impressive zero-stop function, that is both precise and solid. Additionally, there is a visible and tactile indicator that pops up with a red pin that you can both see and feel when you turn into the second turret rotation. And when you turn into the third rotation, it pops up even further, exposing a silver layer under the red pin indicator.

Inside the scope you will find the VET-CTR reticle, a milling type reticle with a large outer ring for encircling targets up close. As you zoom in the scope you will find a Christmas-Tree-style drop grid, as well as a smaller circle around the center crosshair. When illuminated by the 11-brightness settings, only the large outer ring, and the small inner ring are lit up. At 1X the illuminated rings of the reticle closely mimic the reticle used in many holographic sights. Once the scope is zoomed in beyond about 5X, the outer ring disappears leaving only the center ring illuminated. This gives the feel of a red dot aiming scenario, but you obviously have all the rest of the reticle detail as well.

Features

Tube Dia	34 mm
Parallax Setting	100 yards
Click Value	1/10 MIL
Turret Function	Zero Stop, Turret Lock
Elevation Adjustment Range	51 MIL
Windage Adjustment Range	51 MIL
Diopter Compensation	-3 to +2
Illumination Setting	11 Brightness settings
Battery Type	CR2032
Battery Life	N/A
Waterproof	IP68
Fogproof	Nitrogen Filled
Shockproof	1000 G
Housing Material	6061-T6 Aluminum Alloy
Finish	Matte Black
Length	278 mm / 10.9 in
Weight	651 g / 23.0 oz
Items in the Package	A Pair of 34mm Picatinny Scope Rings, A Spare Elevation Turret (Without Zero Stop Feature), User Manual, Lens Caps and Cleaning Cloth, etc

My very first impressions of the 1-10 Continental as I lifted it from the box were very good. It feels quality made, and has perfect resistance on the controls. Optically the scope looks fantastic as well, it feels like a true 1X meaning you can shoot with both eyes open with minimal dispersion between each eye’s perception.

the WLVRN works great with the **Yankee Hill Machine Turbo T3**

Shooting with the Vector Continental 1-10X28

Before heading to the range to shoot with this scope, I wanted to get it mounted and bore-sighted to the rifle. The rifle I chose for testing the Continental is my Desert Tech WLVRN, it is a multi-caliber rifle that I switch barrels back and forth between .223 and a custom 6ARC that I made for it. To mount the scope, I selected a cantilever mount from Zro Delta. After leveling and mounting the scope, I bore-sighted it to be at least close to zeroed before leaving the house.

In my humble opinion, LPVO’s are ideal for short to medium range shooting, typically on a carbine rifle. There is great reason to believe that fast and loose shooting is done well with lower magnification, especially if you can keep both eyes open. But because I enjoy shooting further distances as well, the Continental 1-10 also presents you with the option to engage medium range targets as well. The turrets allow you to correct for distance, and provided you have a gun with the reach, you could easily engage out to a kilometer with such a setup.

That said, most of our shooting with the Continental was done inside the 400 yard-line. The WLVRN in .223 is quite accurate, and hitting small distant targets from supported positions was pretty solid. And even without support, you can quickly engage and take down targets at closer distances.

Vector Optics, continental, 1-10x28, ffp, lpvo, Desert Tech, WLVRN, suppressor,

Optical Performance

The bright image projected from the Vector Continental was beautiful. I very much appreciated the edge to edge clarity on the scope, at either end of the power spectrum. The reticle was clear and crisp, which can often be a challenge with FFP scopes.

Picking out small details at distances like five to seven-hundred yards was easily doable, for example; a small animal like a squirrel was easily targeted at these distances. There is perhaps only one thing I would change about this scope and that would be to add adjustable parallax. Many LPVO’s come with set parallax, the Continental like many others comes set at 100 yards. For much of your shooting purposes this will be more than fine, but once you start reaching out to longer distances it can affect your ability to make hits. You can certainly work with it, but it would be very nice to have the ability to adjust for parallax.

Reliability

I really like to turrets of the Continental series of optics. The clicks are very clean and audible, which allow you to be very precise with your measurements. The 1-10 model has an impressive amount of erector movement when you consider the firearms it is likely to be used on. The scope comes with two different elevation turrets, one for use with the zero-stop and the other for use without it.

The controls of the Continental 1-10 are intuitive, and allows the shooter to be consistent in adjusting the sight. Measuring the recticle travel against the turrets show very consistent and accurate erector travel, back and forth movement of the controls proved to show reliable movement.

Ergonomics

Zero-Stop

The way to set the zero-stop requires removing the elevation turret, you gently push in the inner ring of the turret and rotate it according to the arrow printed on it. If zeroing the rifle requires you to dial down on the turret, you might have to remove the turret and release the zero stop by pushing in and turning it counter to the arrow indicated underneath.

After zeroing the rifle, you can again pull the turret off. This time rotate the inner ring with the arrow indicator. When the inner ring engages a locking pin, you will hear an audible click. That aligns the turret with the zero, and you can reinstall the turret. Check to see that it aligns properly on zero after installing.

Value

The Vector Continental line of scopes seems to offer some outstanding value. Features you would find on much more expensive scopes are included, and they not only look good but they function as you’d expect as well. If you are looking for an affordable 1-10 LPVO scope, you should definitely give this one a look.

Pros and Cons

If I had to mention something I would change about this scope, it would be the parallax. I wish it had the same parallax adjustment of its larger Continental siblings. Mainly because a 1-10 power scope can certainly be used out to distances as far as a kilometer, and at distances like that you absolutely need to adjust for parallax. That said, as long as you understand the fixed setting, this scope is still quite useful at such distances.

On the positive side, this scope offers a great deal of features and a good value. The glass looks fantastic, especially considering the price. The reticle is clear and very useful at all the different magnification settings. The large 34mm tube makes a strong base for the scope, and finish and fit of the whole unit is very satisfying.

Conclusion

If you find yourself evaluating short to medium range optics, you should at least consider the Continental 1-10. Whether it be for a medium range carbine or a small scout style bolt-action rifle, this would be a great optical sight option. Again, if it had adjustable parallax I probably would buy two or three more of these for all my carbines. But that’s just me, many of you may not be concerned or need such a feature. Its a beautiful image with precise aiming points for multi-purpose use, if that is something you are looking for you’ve found it here.

-CBM

Check out more optics review here, including other Vector Optics models

Vector Optics Continental X6 5-30X56 Riflescope

April 6, 2025Optics, Product review5-30x56, continental, scope, vector, vector opticscoldboremiracle

Preface

In my endless quest to get hands on every riflescope available on todays market, I bring you another scope review. This one comes from Vector Optics, which has been in the optics industry since 2005. Vector Optics has a stated goal of changing our perspective of what a “made in China” riflescope means. In furtherance of this goal, Vector seeks to build the most value in a riflescope possible. Today I find myself in a position to evaluate exactly that, and I bring you a review of the Vector Optics Continental X6 5-30X56 riflescope.

The Vector Optics Continental is built on a 34MM maintube, with a 56 millimeter objective lens up front. The erector assembly while fairly petite, carries a robust elevation turret that has twenty-six MRAD of elevation. Inside you’ll find the EBC-MBR MRAD illuminated reticle. All these features fall into the set of a serious long-range rifle scope, lets go deeper into this scope review.

The Vector Optics Continental 5-30X56

Vector Optics Continental 5-30X56 Riflescope Features
Magnification	5X-30X six power zoom
Objective Lens	56 Millimeter
Tube Diameter	34 Millimeter
Ocular Lens	42 Millimeter
Field of View	24.5-4.1 feet @100 yards
Eye Relief	4.0 Inches
Length	15.4 Inches
Weight	28.6 Ounces
Click Value	1/10 MRAD
Mechanical Elevation Range	26 MRAD
Mechanical Windage Range	16 MRAD
Parallax/Focus Range	10 Yards to Infinity
Reticle	Etched glass VEC-MBR
Reticle Illumination	Six Position Red
Battery Type	CR2032
Turret Values	10 MRAD (100 clicks) per turn
Zero-stop	Adjustable
Included Accessories	34mm picatinny high rings, sunshade,, lens caps and cleaning cloth

Vector Continental Features

So far you might have figured out this scope has an impressive suite of features, and all the right ones for most precision rifle shooters. The broad 34mm tube has become the standard for tactical long-range shooting, as it allows greater internal travel for larger elevation corrections. Large lenses compress great detail into the image viewed through the scope, and with a parallax adjustment down as close as 10 yards make it suitable for rimfire purposes. A six-position illumination knob with off settings in between sits outside the focus turret.

the included tool for adjusting turrets was handy and prevented overtorquing

The turrets of the Continental are quite impressive. Ten MRAD per rotation of the turret is what I consider a minimum these days for a serious scope. But theres more; the turrets feature a push/pull locking system, as well as an adjustable zero-stop. The elevation turret also features a revolution indicator that is both visible and tactile, it pops up red upon hitting the second revolution. And when you reach the third revolution of the turret it pops up further still, exposing a silver ring under the red. This feature is excellent for keeping track of what rotation you are on. The Continental also comes with a second elevation turret that allows you to function without the zero-stop and rotation indicator.

the two included elevation turret options

Added Accessories

Aside from the extra elevation turret, the Continental also came with a sunshade which has become common practice as well. As have the inexpensive flip caps that often come with scopes, particularly those made in China. It also came with all the necessary tools to service the scope, including a plastic tool to safely loosen and tighten the turret screw.

the included **scope rings from Vector**

What hasn’t been a typical included accessory is a set of scope rings. I was actually expecting something a little more “economic” to put it candidly. But to my surprise, the rings were actually quite nice. Triple-screw rings with Torx fasteners on both the ring-cap and the pic-rail clamp.

Mounting the Vector Continental

Because I am so familiar with it, I decide to initially mount the Continental to my Desert Tech SRS M2. The included rings were a perfect fit for the height of the scope over the long picatinny sight rail. After leveling the scope in the rings, I torqued them down using my torque limiter T15. The wide coverage of the rings appeared to give great purchase on the scope, which should hold even under heavy recoiling cartridges like the 338 LM.

the SRS fitted with the Continental scope and **Area 419** equipped **Atlas bipod from B&T**

It was then time to boresight the combo, using my visual tool-less boresighting method. Adjusting the scope to match the bore of the rifle would put it on paper at 100 yards. After shooting a few rounds to make final adjustments for zero, it was time to adjust the zero-stop.

Setting the Zero-Stop

Once you have the rifle zeroed properly, the zero-stop can be set. The way to set it requires removing the elevation turret, you gently push in the inner ring of the turret and rotate it according to the arrow printed on it. If zeroing the rifle requires you to dial down on the turret, you might have to remove the turret and release the zero stop by pushing in and turning it counter to the arrow indicated underneath. Approximating the amount you think you’ll need to dial down.

vector optics, continental, 5-30X56, rifle scope, zero-stop, turret — under the elevation turret you can see the zero-stop feature

On the Range

For starters, I used the Continental on my Desert Tech SRS M2. Using a 22-inch 6.5 Creedmoor would make for pretty easy and predictable shooting. The SRS M2 uses a 30 MOA tapered optics rail, which would allow me to maximize the elevation adjustment available in the scope.

Optical Performance

With a 6X zoom the Continental has an impressive magnification range. I had brought along my Kahles 318i as well, and I took the opportunity to look through both scopes at five and eighteen power to see how they compared. It came as no surprise that the Kahles was clearer, with a slightly less hazy image than seen through the Vector scope. I would expect the Kahles to look better at four and a half times the cost.

While it might not have been as clear as the Kahles, it was certainly very usable. The clear image was as good as any Chinese scope I’ve used at that power range. I often find that folks with poor eyesight have more to say about optical quality than I, so keep that in mind.

Ergonomics

I was very happy with the controls of this scope, the textures of the control surfaces were just right. And the resistance to the magnification ring and parallax adjustment were also appropriate. The turret lock is both crisp and audible, so you’ll always know when you’ve locked or unlocked it. And the clicks are also quite crisp and audible, so you’ll have no problem simply counting the clicks if you are dialing blind.

Tracking Performance

Few things have made riflescope more friendly over the last few decades than matching turrets and reticles in my opinion. Being able to spot an impact at 900 yards, quickly measure it and dial a correction, and hit with a following shot is much easier with such a scope. The Vector Continental worked perfectly for dialing corrections, and the reticle gives you a great deal of data points to use.

Measuring the movement of the reticle proved to show repeatability and accurate movement. I like to bolt down my scopes to an immovable object, and run the turrets up and down repeatedly to see how close they track. The Vector Continental was as close to the actual distance adjusted as most scopes I have checked. With less than plus or minus 1/10 MRAD across 20 MRAD of adjustment.

VEC-MBR Reticle

Using reticles for their actual purpose has gotten much easier as they have developed better options. The VEC-MBR reticle of the Continental gives you some great features like an open center, a Christmas tree style drop grid, meter ranging bracket, and an illuminated center. I am not a big fan of incredibly busy reticles, but I found this one to be fine enough that it hasn’t bothered me. It was very effective at measuring corrections and holding wind.

Value

I have had a great variety of Chinese and other Asian made riflescopes, both good and bad. I will certainly say that they have come a long way from the comically poor quality from decades ago. After shooting with the Vector Continental now, this might be the best value for a high-power precision long-range rifle scope I’ve seen yet. After opening the box and seeing the presentation, features and the image through the scope I was actually blown away at the $700 price on Euro Optic.

Pros and Cons

The Vector Optics Continental 5-30X56 has a fantastic feature set, with all the features most precision rifle shooters are looking for these days. Professional finished looks that don’t suggest it was made in a sweat shop, and matched with good lenses that provide great detail. Excellent controls make this scope a precise tool for hitting targets, as do the little extras that matter like zero-stop, turret rotation indicator, 10 MRAD rotations etc.

Included extras also greatly improve the value of this scope, even the packaging gives the feeling of a high quality product. The scope rings were also a nice touch I wasn’t expecting. My very initial thoughts about this scope seem to have been right, its as though Vector engineers channeled some European scope design and brought it all together for less.

If I had to come up with something to dislike, it could really only be the Chinese origin of this scope. I never liked the idea of my sport/defense products being made somewhere besides at home, but thats the world we live in currently.

the view through the Continental at around 24X

Final Thoughts on the Continental

The foreseeable future it seems will be filled with more and more options for shooters, which is a nice thing. Vector Optics has done an excellent job changing what Made in China means. I expect that competition among the optics manufacturers will continue, and we will see more rifle scopes like the Continental that break molds and drop prices.

The Vector Optics Continental X6 5-30X56 riflescope offers impressive performance that would do well for most shooters. It is an excellent value if you find yourself wanting to compete with your financial superiors without spending your children’s future on a scope. Be it plinking in the hills like me, heavy varmint hunting, or shooting PRS competition, I expect the Continental would do well.