Good friends can often be the catalyst we need to try something new. Whether it be a new activity, or way of thinking, some of our best practices are simply learned from the good people we surround ourselves with.
Im a rifle junkie, always have been. But due to the good influence of friends, I have been exposed to all kinds of additional shooting enterprises. One of them being IDPA style pistol shooting, which if you haven’t tried, you should.
Having tried it a few times, mostly as an informal competition between friends, I was immediately hooked. Steel targets, and fast reloads just seem like the best kind of practice for having a good time. But I needed a good pistol for it, being a rifle junkie, my pistol inventory was very superficial and necessity based (CCW). So I began the search for something that fit the bill.
What do we have here?
It was SHOT Show 2018 that I first noticed Canik USA firearms, they are imported by Century Arms from Turkey. My initial impression was they looked great, and I wanted to run a few mags thru one, but much time would pass before I would. A friend let me handle one, and I immediately fell in love again. It was the TP9 Elite Combat model, which draws on several aftermarket parts from Salient Arms International (SAI). The TP9 EC uses a fluted threaded barrel, trigger, +3 floor-plate, and flared mag-well from SAI. The styling and custom look only enhance the graceful lines of the TP9. The Canik is a striker fired 9mm, with double stack magazines. I purchased the pistol as a kit from Century, which included a host of additional goodies. Two magazines, one of which had the SAI +3 floor-plate boosting its capacity to 17+1. Two different grip back-straps to choose from to better fit your hand. A polymer holster to fit the pistol to your gun-belt. It also comes with the slide pre-cut for sighting devices, the kit included a Vortex Optics Viper red dot, and with several other baseplates, I believe you can mount others as well. The threaded SAI barrel is suppressor ready, mine came with 13X1 left-hand threads, but apparently the newer ones are 1/2-28 right-hand threads.
The EC also has a chamber indicator on the top of the slide, when a round is chambered, the red indicator is clearly visible. The chamber indicator is also tactile, you can feel it either in the dark, or while looking towards your next engagement. Also on top of the slide is the fiber optic sight (rear sights removed to install the Viper red dot). The fiber optics are interchangeable with others included in the kit.
Several other things are included in the hard-case, trigger lock, tools for assembly and cleaning, as well as different mag release height options you can customize.
I wasted no time, and literally within minutes of delivery, I was pumping magazines through the TP9.
The Vortex Viper was easy to mount, and zero. I was amazed at how accurate the gun was, I wasn’t shooting particularly far, but once zeroed, I could put a whole magazine thru a less than two inch hole at 10 yards. And if I can hold steady enough, whatever you put the red dot on within 30-40 yds, gets hit.
The trigger overall is pretty good, though I was a little bit let down, as mine wasn’t as good as the ones I had felt prior to purchase. The take-up has a bit of stickiness to it that I didn’t feel on other guns. The break and reset however is clean and very crisp. I have taken it apart several times to see if I can clean up the trigger pull, We’ll see if any of that helps.
The EC also comes with an oversized mag release, which I found to be very good for dropping the magazine. And despite its prominence, never caused an undesired mag drop.
Underneath the muzzle there is a pretty standard accessory rail, perfect for mounting lights, lasers, etc.
The magazines themselves are manufactured by Mec-gar, a well known manufacturer of great aftermarket magazines. There are several different models available including an 18 round and a 32 round stick mag.
The holster is about what you would expect from a manufacturer, nice enough to use, but leaving you wanting more. It’s serviceable, but I dont care for the release. Instead of pressure to the side releasing the pistol, you curl your trigger finger in the same action as you would to pull the trigger. This seems a little unsafe, in that once clear of the holster, if your finger continues the curling motion, it could find the trigger before your on target. This is probably just a training issue, but I didn’t care for it none the less.
Shooting the TP9
I mentioned the accuracy of the TP9,I’ll add that the functionality has also been almost perfect. I say almost perfect because I have had a couple malfunctions, nothing a tap, rack, bang wouldn’t fix. And more than likely due to the low budget ammunition I was shooting at the time.
Even so, with the cheap ammo I find it very easy to hit what I’m aiming at.
The flared mag-well made mag changes easy to feel into place, though I wish the flared part had at least two points of contact. As it sits, the mag-well flare is attached by a single screw at the rear, not a huge deal, but it has caused me to re-engineer it in my head.
I bought the gun with the plan of using the red dot on it, though I wasn’t sure I was going to like it. I figured if I didn’t, I could just run the iron sights on it and sell the Vortex. But as it turns out, I really enjoy shooting with the red dot. So much in fact that I’m considering doing the same to another pistol I love and shoot quite a bit, my Taurus TX22. I have since run a couple other red dot optical sights on the pistol, and I settled on the US Optics DRS 2.0 Enhanced, I found it to be a superior option to the other two. One thing that I absolutely love, is the way this Canik feels in my hand. It’s a perfect fit with the larger grip back-strap, and it points so nicely and naturally. The way it draws from the holster and lines up perfectly for the shot gives me some undeserved confidence.
With a threaded barrel it was only a matter of time until I ran the Canik with one of my suppressors, and I was very happy with the results. I used two suppressors from Yankee Hill Machine, the first one and my favorite of the two is the Nitro N20 shown above. It is a modular can that has a short or long configuration and is built with extremely light materials. In the short configuration it is so light I barely noticed it when shooting the pistol, and the sound suppression was amazing. There was a slight uptick in the felt recoil, but I was expecting it. Not so much as to feel pressure against your hand, you could just feel the pistol cycling harder.
It may sound like I’m ragging a bit on the TP9 Elite Combat, but to be honest I really do like it. I’ve never been much of a gun snob, so when it comes to minor issues I tend to look right thru them. I love shooting the TP9, and intend on becoming much better with it, might even take a few classes or training courses to save myself the embarrassment in public.
I think despite the little issues I’ve brought up, the gun is a great option. I may get another holster for it, and I will definitely be getting a bunch more magazines, and ammo.