Tag Archives: suppressed weapon systems

Suppressed Weapon Systems MISB 308Win for the SRS

I swore off shooting unsuppressed long ago, and I only do it occasionally by choice. The suppressor bug bit me hard many years ago, and I have never vanquished its effects. With that in mind, I am always thinking about better ways to hush the noise of my favorite pastime. Who would have thought that an idea I had depreciated would turn my jaded eye.

One of my most favorite rifles of all time, is my old Desert Tech SRS A1. I have run countless barrels through it, I currently have somewhere between ten and fifteen barrels of assorted different calibers. Factory, custom, and even a few specialty barrels. Even with all those options, I still love my old 16” 308 Winchester Covert barrel. The calm and consistent performance of the 308 is like an old friend, so when I got the opportunity to try yet another great 308 Winchester option for my favorite rifle, I jumped at it.

Suppressed Weapon Systems has been in the suppression business for some time. They specialize in the integration of suppression technology directly into the firearm, instead of making the suppressor just a muzzle device. Their MISB (Monolithic Integrally Suppressed Barrel) is available for many different firearms, including my dearest SRS. The modularity of the SRS family of rifles makes it ideal to pair with technology like the MISB, and with a durable cartridge like the 308, it would last for some time.

I’ve often tinkered with the idea of an integrally suppressed barrel for my SRS, but I was always worried about spending the money on an NFA item that would get burnt out and need to be replaced. A valid concern I had always thought, but the MISB is constructed in such a way that the tube can easily be removed and installed on a new barrel/baffle stack. So with my main concern assuaged, I dove in with both feet.

The Suppressed Weapon Systems MISB for the SRS is manufactured from a Bartlein Barrel blank, well known for great quality and precise shooting. The muzzle is cut at a determined length, in my barrel’s case, around sixteen inches. But the remainder of the barrel blank is then cut into the suppressor baffles. The length of the barrel to the breach of the muzzle is fluted, and drilled, I assume to decrease weight but also to add an expansion chamber for venting high pressure gas.

The outer tube of the MISB is a good fit, but not entirely tight, this was a bit of a concern for me at first but I later learned it was necessary to free-float the barrel. Having the outer tube captured and tightened with the barrel would add stress and torque to the overall structure. The tube is sealed at both ends with what appears to be Viton high temp fluoroelastomer O-rings. The muzzle end of the MISB has a threaded cap also sealed with the O-ring, it is knurled and has cuts for torquing it into place with a tool. Its an impressive example of machining design and ingenuity.

I couldn’t wait to get the barrel mounted in my rifle chassis, and test its performance. As soon as I got home with it, I hurried to my basement man-cave and installed it into my SRS. I found the fit to be a bit snug, perhaps more-so than any other barrel I’ve tried. Its easy to get a burr on the shank of SRS barrels, one must be careful. But that was not the case with the MISB, it was simply just a bit tight. Perhaps a slightly smaller diameter would help, but I found it to be consistent, so it was a minor inconvenience. It was the same when I mounted it in my SRS A2.

Once mounted, I headed for the hills to get the rifle zeroed with this new barrel. As usual, it was an easy process. Most SRS chassis will change POI with a different barrel, but it is rarely off by more than a few inches. So a quick re-zero on my scope was easy, and in no time I was using the rifle to shoot steel at 710 yards.
SWS guarantees sub MOA accuracy for three shots with their MISB system, but suggests that 1/2 to 3/4 MOA is expected more often than not. I found my barrel to be consistent with that.

The suppression quality of the barrel was on par with what I expected. The first round pop was significant, but quickly forgotten with successive shots. The slender barrel looks very handsome in my A1 with the longer handguard. A few inches longer than a standard twenty-two inch barrel which pokes just out of the handguard. When mounted in my Covert A2, it was a few inches longer than the standard Covert sixteen-inch barrel when fitted with the DTSS Suppressor.

I think the SWS barrel offers a great option for those looking for a slender and inconspicuous barrel to keep things quiet. At $2200 for a barrel, it is no small investment. But it’s also not much different than a good barrel fitted with a suppressor would cost you, and SRS owners are gluttons for dropping coin on good barrels. And the fact that you can reuse the tube on a new barrel blank having no interaction with the Federal agency everyone loves to hate makes it even more appealing. I look forward to using it even more in the future.