Introduction
There are few bigger names in the suppressor industry than SilencerCo at the moment. SiCo has been around for quite a while, and has dominated much of the suppressor market for some time. At the top of the food chain, we can expect some cool and innovative products from SiCo, and today I bring you one of them; The SilencerCo Scythe Ti suppressor. The company offers two different Scythe models, the Ti we are looking at today, and the Scythe STM.
The SilencerCo Scythe
Of the two Scythe models there is a bit of a split in purpose. The Ti model is made completely from titanium, a first for SilencerCo. The STM model is made from stainless steel, and has a two stage design that allows you to use it in a short or long configuration. Both models use an anchor brake at the front of the muzzle end to help reduce recoil.
SilencerCo pioneered the hub system that nearly every manufacturer uses today. This allows you the ability to change the way you mount your suppressor, whether it be direct thread, QD mount with an ASR suppressor mount or otherwise.
Our Scythe Ti was focused more for activities like hunting, where its compact size and lightweight make it optimal for long hikes. And the Scythe is rated for up to 300RUM cartridges which covers most of what a typical American hunter would use.
Scythe Ti Specifications
| Manufacturer | SilencerCo |
| Model | Scythe-Ti |
| Type | .30-caliber rifle suppressor |
| Material | Grade 5 & Grade 9 titanium |
| Length | 6.16″ |
| Diameter | 1.73″ |
| Weight | 7.3 oz. with Anchor Brake |
| Suppressor Weight | ~6.3 oz. |
| Caliber Range | .223 Rem. / 5.56 NATO through .300 RUM |
| Barrel Restrictions | None |
| Full-Auto Rated | No |
| Mount | Bravo |
| Included Mount | 5/8×24 titanium direct-thread |
| Muzzle Device | .30-cal. Single-Port Anchor Brake |
| Finish | Type II anodized, oil rubbed |
| Construction | Fully welded titanium |
| Primary Use | Hunting, precision rifles, lightweight rifles |
As I unboxed the Scythe Ti, the immediate impression was how incredibly light it is. At just over 6-ounces it almost feels fake, but I can assure you it is not. The raw titanium color looks great in my opinion, and the smooth welds are so fine they look more like tool marks.
It came with a couple tools for servicing the Scythe, as well as a 5/8-24 threaded hub for mounting. But like most cans these days, you can install another hub if you’d rather use one of the the QD devices or muzzle brakes.
In the Field
Using the Scythe in the field was done both on a public rifle range as well as in the Rocky Mountains where I typically spend my time. I would end up using the Scythe on several different rifles of various calibers. Myself and the friends that came along would take turns between shooting and listening to the report.
Sound Suppression
On .308 Winchester sized cartridges the sound suppression was excellent. Even for other shooters near the muzzle of the rifle the report was tolerable. And from any distance of five or so yards away it sounded as pleasant as could be. Regardless of where we were, I felt no reason to use hearing protection with the Scythe. Of course that is not what most people would recommend, for safety sake anyways.
Shooting through the Scythe on the range, and in the cold and wet Rocky Mountains gave excellent insight to the Scythe’s suppression. I would happily use it on any of my sub 30-caliber rifles, it sounds fantastic.
Recoil Reduction
With its built-in anchor brake, the Scythe also helps reduce recoil. By diverting the escaping gas perpendicular to the bore axis, it reduces the force pushed against the shoulder of the shooter. Again this is a design that SiCo explored and has done very well with on several of their other suppressors like the Omega 300, you can see more about that one here.
Smaller cartridges like 308 Winchester, 260 Remington and 6.5 Creedmoor are not particularly heavy recoiling. But with the Scythe installed they feel like a child’s rifle, with hardly any recoil at all. Grant me this though, several of the rifles used during testing were heavier than a typical hunting rifle. That likely helped with recoil as well.
Removing the anchor brake from the Scythe can further reduce weight, and length, but c’mon… The Scythe is already incredibly light, and the brake portion so short that it seems silly to change it out for a traditional end cap. It seems I’m not the only one who thinks so, as a search of the internet show hardly any images of the Scythe without its brake in place.
Accuracy
Like most suppressors in my experience, the Scythe had no ill affects on the accuracy of the rifle. If anything it helped improve accuracy by increasing the mass of the rifle making it more anchored. Additionally, the recoil reduction helps keep you on target, which helps spot hits or misses on the target. Both of these facets will increase the amounts of hits you make.
Suppressors typically strip high pressure waves from the bullet as it leaves the muzzle. Much like a boat traveling through a protected harbor that keeps the big waves out. As the bullet passes through each baffle in the suppressor, it travels through more and more calm air. This allows the bullet to start its flight with less interference and they typically shoot better.
Modularity
With its 1.375×24 TPI hub, the Scythe can use any number of different mounting solutions. There are various SiCo brake options but you don’t need to stop there, as even other manufacturers hub mounts will fit the Scythe. Though it comes with a simple and lightweight 5/8-24 direct-thread hub, you can change it to better fit your purposes should you desire.
Again, I saw no reason to remove the anchor brake from the Scythe, and it would appear most people don’t.
Value
With an MSRP of $1174 the Scythe Ti isn’t exactly an entry level suppressor. But it is well worth the extra bit of cheddar you pay. Its hard to find a lighter can in this category, as most popular models are around 2 ounces or more heavier.
So if you are a hunter looking for the most compact and lightest suppressor you can get for your hunt, you should definitely be looking at the Scythe.
Its popularity also means that it flaws can be shown. SilencerCo says the Scythe has a very low rate of failure, but there are enough reports of failure to not be insignificant for those looking. And SilencerCo appears to be very quick to repair or replace them.
Pros and Cons
| Extremely Light | Not Inexpensive |
| Modular Mounting System | Some Reports of Broken Welds |
| Recoil Reducing Brake | Heats up Quickly |
| Low Reflective Surface | |
| Compact Design | |
| Fully Welded Construction | |
| Excellent Sound Suppression | |
| Caliber Compatibility (5.56-300Rum) | |
| Rapid Cooling Time |
My Verdict
Shooting with the SilencerCo Scythe has proven to be very pleasant. It provides great sound suppression without adding a bunch of weight and length to your rifle. You can also configure the Scythe to mount in various ways that best fit your application. And on some of the heavier calibers it really helps reduce recoil, while smaller cartridges recoil is reduced to minimal. This performance does come at a slightly higher cost than many other options, but worth it in my opinion.