Category Archives: Shooting hardware

Rifles and their parts

Ashbury Precision Ordnance Savage 110 6.5 Creedmoor

Product review, Shooting hardware, , , ,

Introduction

I’ve been a precision rifle junkie for over two decades now. Having been part of the community all these years I’ve seen a few things come and go. There has been a great deal of equipment presented by a plethora of manufacturers, and today we are going to revisit a couple of those. Today we are looking at the Savage 110 6.5 Creedmoor.

Ashbury Precision Ordnance (APO) has been a big name in the industry for some time. Manufacturing rifle chassis and rifle systems. Savage Arms is another big name in the shooting sports that has been well known for making all kinds of firearms, but particularly as it relates to today’s subject. Savage is well known for making affordable precision for those that have perhaps a tighter budget. The rifle we are discussing today is a combination of the above two companies. It is a Savage Model 10 6.5 creedmoor rifle combined with APO’s Saber chassis system.

Ashbury Precision Ordnance

APO is an international manufacturer and broker of firearms and their accessories, offering high performance shooting equipment. I was made aware of APO years ago when I began to see more and more of their rifles and chassis systems show up on the scene.

My initial impression back then was that APO’s designs were specifically focused on shooting performance. By that I mean their rifles and chassis were built quite robust. Rigid and perhaps even overbuilt is one way you could describe them. For static accurate shooting, this is not a bad approach. But for fast moving competitive shooting styles it could be perhaps a little less ideal.

In recent years APO has all but disappeared from the places I remember seeing them so often before. So much in fact I wondered if they had moved on to another market. These are of course only one man’s opinions, and perhaps I am simply less observant than most.

Savage Arms

I bought my first Savage decades ago, I was already deep into the dark art of rifling and even had custom rifles built prior. But that old Savage 10FP just hit right, and I had to have it. It quickly because my favorite due mainly to its flat-out performance. I would make some of the best shots of my career with that rifle because of the consistent use and familiarity.

This is a common thread among Savage shooters. In my opinion, despite the lower cost of Savage barreled-actions they frequently punch above their weight. A reputation like this has led to a cult-like following by many who have had the same experience I did. On many occasions I watched as my little Savage outshot rifles two and three times the cost (possibly due to the shooters skill). Today’s subject is a direct descendant of my old 10FP. The Savage model 110 being a more modern version of the same design.

Shop Savage bolt action rifles, because you are civilized

Unboxing

When I first opened the box I wasn’t sure what to expect. I knew it was going to be an APO/Savage combination but of what generation I wondered.  As I lifted it from the box my curiosity remained, as it appeared to be of a slightly older model.

The complete rifle was quite long. Sporting a twenty-six inch fluted Creedmoor barrel that was tipped at the end with a three-prong suppressor mount. The large diameter M-Lok handguard filled my support hand , and the AR-15 styled pistol grip granted easy access to the trigger. At the rear of the rifle, a folding buttstock reminded me of times past. Mounted on an AR buffer-tube was an adjustable buttstock. The Savage action had the longer bolt handle and knob typically seen on the long-range models.  It also featured Savage’s famous Accu-Trigger, and a tang-mounted safety.  I ran the bolt a few times with the rifle shouldered, and everything felt right in the world. The rifle is fed by AI pattern box magazines. This rifle came with a Magpul version which was easily removed by the large mag-catch in front of the trigger-guard.

Preparation for the Range

Everything looked right, so it was time to prep this rifle for the range. I would need just a few things to see how this rifle would perform, mainly a rifle scope and a bipod. Choosing to put my US Optics FDN25X on the rifle was easy, mainly because it was close and available. I installed a Magpul sling stud in the front of the handguard so I could install a Harris SL bipod.

Once I had those two items installed on the rifle. I again tested everything for compatibility and found something I wasn’t prepared for. Even after mounting my scope as far back as I could on the scope rail. The length of pull was so long I couldn’t even get a good position to see through the scope. Despite all the adjustments on the buttstock it was incapable of getting any shorter than it already was. This was going to be trouble as I simply couldn’t shoot it as it. I could have mounted the scope differently or install another scope but it wouldn’t have completely solved the problem. I ended up having to swap out the buttstock for a shorter collapsable type, not exactly my first choice  but it would work to get the rifle on the range.

On the range

It was time to get this rifle on the range and see what it would do. I prefer testing rifles in the open country of the Rocky Mountains or the wide open deserts nearby. It allows for long-range testing and there nobody there to bother you.

Once I had this rifle on the firing line with a target setup at one-hundred yards, it was finally time to feed it. I loaded a few rounds of Hornady Match 140 grain ammunition. I’d boresighted the rifle previously, so I was expecting it to be on paper. After firing a few shots,  they weren’t where I expected them to be on paper. Then I discovered another unexpected predicament.

Issues?

The ejector didn’t seem to be working on the rifle, it would pull the spent cases from the chamber. But then it would drop them shortly thereafter leaving me no choice but to finger the case out of the way. While this was an unfortunate and unpleasant development, it’s not a big deal either. The ejector spring is an easy repair to make, which I would have done if I’d had the parts. But without them I just moved forward with my testing.

The rifle shot ok, I would have liked it to shoot better for sure though. Groups averaged under MOA but barely, and a rifle like this should be shooting 1/2 MOA all day long.

The more I shot the rifle the more familiar I became with its functions. This rifle fed like a dream, especially with that long bolt handle to give more leverage. Surely the low friction of the Magpul magazine were to thank for it.  The 6.5CM is not a big recoiling rifle, but competition rifles are typically built for as little recoil as possible and this rifle could have used a better brake towards that end.

The chassis of the rifle was a bit cumbersome for me, it folds to reduce the overall size of the rifle which is nice. But my complaints are more regarding use, the magazine well seemed entirely too narrow. I required significantly more focus when reloading than other rifle chassis I’ve used.

Pros & Cons

Three-prong muzzle device, perhaps a brake would have been better

Pros
-Solid and very robust design
-Compatible with popular designs and accessories
-Folding stock for reduced transport
-Accu Trigger feels good as always
-Extended bolt handle for extra leverage
Cons
-Buttstock was too long, couldn’t go short enough
-Magwell was finicky
-Accuracy had degraded to sub-par
-Ejector issue

Read the Conclusion Here

CONCLUSION

In my experience, Savage rifles typically shoot better than this one did. It’s certainly possible that this rifle is in need of a tune-up after years of use with a previous owner. Or it could just be one of those occasional ones that doesn’t shoot that great.

The APO chassis was kind of a letdown too. Looks aren’t everything, obviously, but they do count for something. This chassis felt like it had fallen out of a time machine from 2003. The only thing about it that felt relevant was the Magpul magazine.

-CBM

Like Savage rifles? Here is another one.

MPA PMR Pro II 6.5 Creedmoor, A masterpiece indeed

Product review, Shooting hardware, , ,

If you haven’t noticed Master Piece Arms (MPA) over the last few years, you either don’t follow precision shooting, or you have found a very good hiding place. MPA has been absolutely dominant in the precision shooting world, even deeper than I thought. MPA manufactures a variety of products, Impressive competition pistols are one thing you’ll find on their website, but their competition chassis and complete competition rifles are certainly more commanding. Todat we are taking a look at the MPA PMR Pro II, a rifle built for PRS style competition.

The Rifle

The rifle we are reviewing today has a Curtis Custom Axiom rifle-action at its heart. The barrel is one of MPA’s chambered in 6.5 Creedmoor cut at twenty-six inches with a one-in-eight-twist. At the muzzle there is one of MPA’s competition muzzle brakes to help keep the rifle on target  so shooters can spot their impacts.

The smooth stroke of the Curtis Action is immediately noticeable, with its three-lug bolt to reduce the bolt lift to a shorter throw. I have become a huge fans of custom actions like this one, the operation aside there is so much to appreciate about them. The robust bolt-stop that doubles as a release, and the very consistent extraction and ejection with very little effort makes them a pure joy to shoot.

Shop Masterpiece Arms

The PMR chassis is another work of craftsmanship, with cuts in all the right places to allow customization. Fully adjustable comb and buttstock make it easy to fit to any shooter, and the adjustable vertical pistol grip feels outstanding when you are in the shooting position. Little things like embedded bubble level at the rear of the tang take a lot of work out of shooting well, which seems to be what MPA was after. And it seems that shooters have responded.

Other features like a Trigger Tech Diamond and a built in ARCA rail and QD barricade stops that can be moved to wherever you need them. Various bipod mounting options and an night vision bridge make everything about this rifle desirable. 

Rifle setup

Before taking the rifle to my mountain hide, I wanted to get it prepared for testing. For that I would need a good scope, and a bipod. My US Optics FDN17X was a perfect match for color, so that made my choice easy. I also grabbed an Atlas bipod on an AREA 419 ARCA clamp and attached it to the ARCA rail.

I grabbed some Hornady match 140 grain and a box of Federal Gold Medal Match 130 grain ammunition, as well as a few other items before heading out.

On the Range

I boresighted the rifle before zeroing it at one hundred yards, and after placing my target I settled in behind the rifle on my shooting mat.

As I loaded the AICS magazine I noticed the adjustment screws on the side of the chassis, this allows the user to customize magazine tension. With a handful of rounds in the rifle, I steadied the reticle on my target and fired the first shot. Like a true match gun, the rifle barely moved as I felt the gust of air move from the muzzle. The brake is extremely effective at reducing recoil, and the rifles impressive weight also helps keep it in place.

the very first group shot from the PMR using Hornady 140 gr Match

I made a couple adjustments to correct the impact, and then fired a quick five-shot group. I was immediately impressed, as I hadn’t even really been trying that hard. But quite literally the first group with the first ammunition I tried was sub-half MOA. I smiled to myself as I know there’s only one kinda rifle that does that; a damn good one.

Just to make sure, I continued shooting a few more groups, including both ammunition types with the same results. I’m not one to waste time and expensive ammunition at one-hundred yards, especially when I have targets all the way out to eight-hundred and twenty yards. The accuracy of this rifle was just outstanding, there are few things more satisfying than watching the bullet impact exactly where you want it to nearly half a mile away.

I kept shooting until I had no more ammo to spend, and I loved every single shot.  Everything about this rifle was fantastic, running the bolt from the shooting position was superb. Spent cases went flying clear, and fresh rounds were chambered almost effortlessly. The comfort of the perfect fitting chassis made it even easier to make the hits. The US Optics Foundation 17X made a perfect companion not just because of its color, I was able to move back and forth quickly from one target to another adjusting the power of the scope on the way.

At one point I targeted a six-inch steel disc at four-hundred and thirty yards, and as fast as I could run the bolt and pull the trigger the plate would dance. It was exactly the kind of precision rifle shooting experience everybody should have.

Pros and Cons

I’ll start with the cons this time, because I’m gonna need a lot of space for the pros. This rifle is pretty heavy, but by design it’s supposed to be. The weight keeps it still while shooting, and it wasn’t made for hiking around through the rockies like I normally do so I don’t hold it against the rifle.

The rest of this rifle is obviously the result of years distilling the best features of a competition rifle. From the action to each end of the chassis this rifle is pretty close to perfect for competition shooting. The quick adjustments allow you make the rifle comfortable on the fly, while the forend accessories allow you to steady up the rifle in nearly any condition or obstacle. The ARCA rail built-in to the forend makes it quick and easy to change out bipod and tripod interfaces in seconds, and there’s really not enough room here to go into all the ways you can add weights, stops, and other accessories to the rifle.

The MPA muzzle brake would be a great addition to any rifle where you’re trying to reduce movement. And even little things like a temperature strip on the barrel, the rear bag-rider and the built-in bubble level are greatly appreciated. These and other accessories are made by MPA that will definitely help improve your rifle’s performance, just don’t expect it to make up for poor shooting.

The Curtis action is the jewel of the whole thing, it ran like a lead pump in slow motion and the extremely clean trigger break made it feel even better. And to top it off the whole thing was just sexy as a rifle can be.

Click here to read my Final Thoughts

Conclusion

I knew I was going to like this rifle from the moment I opened the box, but I didn’t realize just how much. It’s clear that MPA is at the top of the PRS game, because they understand what shooters need and want.

There are so many little games and tricks you can incorporate when shooting competitively, and the PMR seems to have everything you could use to produce the best shooting results in those scenarios.

With all that said, I found it quite astonishing that a brand-new MPA PMR Pro II can be purchased from MPA’s website for only $2,500. That may not be chump change, but in my estimation, it is an excellent price for what you get from these rifles.

If you are interested in a competition rifle, don’t overlook this one.

-CBM

Howa Mini 6mm ARC

Product review, Shooting hardware, , , , ,

Introduction

The Howa Mini Action rifle offers a compact rifle for hunting or sporting purposes, the very short action is designed to run only the shortest center-fire rifle cartridges. With the extra short action, the Mini is designed for cartridges like the .223 Remington and 300 Blackout. As well as newer cartridges like the 6mm ARC model we are looking at today. The Model 1500 Mini is a push-feed two-lug bolt action, it is fed from a detachable box-fed magazine. 

mule deer, deer hunting, howa, howa mini action, 6mm ARC, 6 arc, suppressed hunting, us optics,
2025 update, the Howa Mini 6 ARC continues to perform. My wife took this handsome little buck with a single shot, read all about it in A Stalk to Die for

Howa has long been known as a very affordable and reliable rifle manufacturer. Their products have typically been marketed toward the hunting public. But in recent years they have also moved into the precision shooting competitive world as well.

My purpose for the Mini was along the same lines, I bought the rifle for my wife who is also quite petite. She needed a good rifle that shot well for all of our shooting adventures, and the Mini fit that niche quite well.

Its lightweight and soft recoil made it the perfect choice for someone like my wife. And since I already was quite familiar with the 6mm ARC, and had a great deal of components to load it. I figured it would be a great choice. I’m excited for this fall to see just how well it functions for her on the deer and pronghorn antelope hunts that we plan to do.  After having spent a short time with the rifle, I expect we are going to enjoy it very much. 

Howa Mini 6mm ARC Review

When I purchased the Howa Mini, it came with the option of an included riflescope from Howa’s sister company Nikko Stirling. I figured I’d give it a try, and see how the package performed. 

As I lifted the package from the box I was immediately pleased with the weight, sure it would have been even better had it weighed less. But it was certainly not heavy at 7.4 lbs for the whole package. I lifted the bolt and ran it back and forth a few times, followed by pulling the trigger. I love two-stage triggers, and to be honest I’d forgotten the Mini came with one. It felt great, though I think I might lighten up the pull weight in the future.

The synthetic stock was another surprise to me. Typically the inexpensive polymer blend stocks that come with economy grade firearms are pretty flimsy. They flex far more than you’d want them to. I was genuinely surprised by the Mini’s stock, it actually felt quite rigid. Far better than most every other comparably priced rifle stock I’ve played with in the recent past. This would hopefully translate into better accuracy for us in the field.

I looked through the little 4-12×40 scope. To my surprise it had a milling type reticle and an exposed target turret with MOA markings. It looked pretty good, and made me even more anxious to get it in the field. 

The Howa Mini looks to be a perfect little rifle for someone looking for a compact and inexpensive rifle in a small caliber, but one they could use in the deer woods.

Shope Howa rifles and barrelled actions here, ya thats right barrelled actions

Specifications

Caliber 6mm ARC
Capacity 5 or 10 round box magazine
Barrel length 20 inches
Weight 7.4 lbs as tested
Stock Pillar bedded glass filled nylon
Safety Three position
Trigger Adjustable two stage
Calibers 6 ARC, 223 Rem, 6.5 Grendel, 7.62×39, 350 Legend

Pros & Cons

Pros

  • Lightweight ultra short action
  • Two-stage adjustable trigger
  • Pillar bedded glass-filled nylon stock
  • Detachable 5 or ten round magazine
  • Threaded twenty-inch barrel
  • M16 style extractor
  • Compatible with Remington 700 two-piece scope bases

Cons

  • Detachable box magazine is a little weak.

First Impressions of the Howa Mini 6ARC

My first trip to the range with the Howa Mini was pretty easy going. I had a great selection of ammo from Hornady.  Consisting of the match 108 ELDM, the Black 105 BTHP, and Precision Hunter 103 ELDX. I was sure one of these would shoot well in the rifle. 

Buy 6mm ARC ammunition

Upon arriving at the range I sat down with the little Howa at my bench and started stuffing cartridges into the magazine. That’s when I noticed more about the magazine design, it was a bit flimsy. I mean it works fine, and I’ve shot quite a few rounds through it without issue, but it’s awfully thin. And I feel like if I was to smack it hard into a tree-trunk or rock it would surely split apart and send my ammo all over. I also wish they made a flush magazine option that didn’t hang down out of the stock. Neither of these things are deal breakers for me, just something I’d point out.

  I’d boresighted the rifle prior to arriving, so I immediately set to zeroing the rifle at the hundred yard target. In just a few shots I had a solid zero, so I fired a five shot group using the 103 ELDX load. The group measured just barely over 1 MOA, which isn’t bad but not as good as I’d hoped. Later shots would prove to group much better.

howa mini 6mm ARC
The Mini shot even better when suppressed by the Yankee Hill Machine Nitro N2.0

We then tried shooting the other two ammunition types I’d brought along. They averaged slightly smaller but not enough to matter much. Then I spent the afternoon shooting a few more targets and feeling out the rifle. I was actually quite liking the feel of the little Howa. The trigger felt great, the bolt was smooth and easy to run quickly. And despite my complaints about the magazine, it ran flawlessly. My next trip was a shooting hike into the snowy springtime Rocky Mountains. I’d brought my daughter along for company and to get her out of the house. And of course to try shooting the little Mini 6 ARC. I’d

Range Trip  round Two

I’d taken the liberty of swapping out to a different scope and mounting system mainly because it was so easy to do so. After removing the Nikko Stirling scope and mounts, I dropped a two-piece Remington 700 base on the action, followed by some Warne steel rings to hold my US Optics TS25X. I felt a little bit more confident with this setup, even though it did add a little bit more weight. I felt it was a good trade up. 

Again I had the rifle zeroed in just a few shots, and in no time we were smacking targets all over the mountain.  For suppression I was running my Yankee Hill Machine Nitro N20 Titanium suppressor on the rifle, which made it even more pleasant to shoot.Both my daughter and I had a great deal of fun shooting the Mini. Picking out little specks of snow on the opposing side of the canyon for targets.

A typical group made from my 105 BTHP handloads

It was a great confidence builder everytime the snow would splatter leaving a dark spot in the moist mountain soil. I stretched the little rifle out as far as six-hundred and twenty yards, and it was still hammering with  acceptable accuracy to hit a deer. After a few hours playing in the mountains I was very satisfied with the rifle. Knowing that we could have easily taken a deer in these same hills where we hunt every fall.

Shop Howa Mini models at Sportsmans Warehouse

Everything about the Howa Mini fit well into my activities. The size of the rifle is perfect for doing lots of hiking. Everything worked great on the rifle, and it was very effective at putting hits on target. I feel like adding the better scope and mounting system surely helped the rifle shoot better. Though I’m quite happy with it, I may do some additional tinkering yet to see if I can squeeze any more accuracy out of it.

 Reliability

The Howa Mini functioned flawlessly during my testing, no malfunctions or issues.

Accuracy

Accuracy from factory ammo wasn’t bad, whereas my handloads turned out to shoot excellent.  Typical groups with handloads were 1/2 MOA.  For what it is and what it costs, I am quite happy with the Howa Mini.

Overall Feel

The Mini feels better than its price point in my opinion. I’ve spent more money on rifles that didn’t feel this good. It’s comfortable to handle and functions great.

Features

howa mini 6mm ARC
Disassembled you can see the two-stage trigger

Mini Action-

The ultra-short Mini action is lighter and smaller than most rifle actions. It looks like a Model 70 that someone put in the dryer too long. This smaller action shortens the bolt-stroke, allowing you to repeat faster. The icing on the cake is the ability to use Remington 700 scope bases on the rifle.

Two-stage Trigger

I love the two-stage trigger of the Mini. After lightening up the pull weight a little bit it felt even better. It’s not a Jewel or Trigger Tech, but it feels great for a factory rifle two-stage. The safety is a three position that locks the bolt closed in the 3rd position.

Threaded barrel

Howa mini 6mm ARC
Though I wasn’t a huge fan of the magazine, it wasn’t a deal breaker

Thank goodness the folks at Howa live in this century, and provide most rifles from the factory with threaded barrels. Suppressors are more popular than ever so this should be the norm. I ran my suppressor as well as a good muzzle brake on the rifle. And was quite happy with either option. Both greatly reduced recoil making it possible to spot my own impacts.

Detachable Magazine

This is the one weak spot for me on this rifle, but I’ll admit I may be looking a bit hard at it. I wasn’t surprised to see a plastic magazine and floor-plate based on the price of the rifle but I was hoping for a little bit better one. Regardless, I will happily run this mag until it falls apart, and then buy another for the $30 or so that they cost.

Synthetic Stock

Howa Mini 6mm ARC
The US Optics TS25X made an excellent choice for the Mini

The glass filled nylon stock of the Mini felt great. Not because I like nylon stocks but because it is one of the better ones I’ve ever used. And the fact that Howa included a pillar bedding system gives them extra points. The stock was very rigid and tough.

How We Tested

With intentions of keeping this rifle,  I gave it a good wringing out to ensure there was nothing I couldn’t live with. I spent a great deal of time tinkering with the rifle, even taking it apart on to see what makes it tick. I ran the bolt just like every other rifle I own, only to find out that I didn’t need to. The smooth bolt fed and extracted cartridges with ease. It has a good strong ejection pattern to get spent cases out of the way. Shooting the Howa Mini from every different position, loading and reloading it all the while was great. Shooting supported from a bipod was where it shot best but that is pretty standard. It shot all the different types of ammo I brought just fine, including my 6 ARC reloads.

As I write this I just ordered some additional varmint bullets for it. We’ll see how they shoot for varmints here this spring. With either scope and mounting system the rifle functioned great, I may end up shooting this thing myself come hunting season, provided my wife will let me. 

Ammo Used

I used all ammunition from Hornady, all three of Hornady’s lines of ammunition worked great in the rifle and only made me love the ARC even more. 

Score Card

Reliability (10/10)  The Howa Mini worked perfectly during my testing. I see no reason to anticipate that to change.

Ergonomics (8/10) I would like a more vertical grip. But I get that this is a pretty entry level rifle so I cant expect too much.

 Customization (7/10) The Mini is a bit of an anomaly so there aren’t many things that will work with it. Most unfortunately a different magazine system. It’s great that it works with Remington 700 scope bases though. There are a few aftermarket stocks and such for it, which is great.

Appearance (7/10) It’s a generally good looking little rifle, I wish there was a flush mounted magazine option. There are other camo pattern finishes available, I think I’ll end up doing a custom Cerakote job on mine.

Value (9/10) I absolutely think this is an excellent value, for the few flaws I’ve mentioned I would 100% buy this rifle again. I’m already considering another in perhaps a 6.5 Grendel, but I don’t want to get ahead of myself. The scope that comes with it is nothing fancy, but to get a rifle and scope like this for the street price as little as 550 dollars is a good deal in my opinion. 

Continue reading here

CONCLUSION

I have greatly enjoyed my time with the Howa Mini in 6 ARC. I think it fits perfectly into the niche spot I wanted it for.

It’s small and light enough for the more petite shooters in my house but still carries the accuracy needed to hunt the big game animals we hunt every fall. And I am pleased with the level of quality from the little Howa, as are both my wife and daughter.

The Howa Mini’s extra short action reduces weight and length and makes the rifle extremely easy to haul around and shoot. Whether that be for deer hunting, varmint, or predator hunting, I think the Howa Mini is a great option.

If you find yourself needing something smaller than the average rifle of the gun store rack, you should look into the Howa Mini in whatever caliber fits your fancy.

-CBM

2023 Update

We have hunted with the Howa Mini for a whole year now. Using it for hunting varmints, and mule deer. My opinion of the rifle has only improved with time, it has been very reliable and maintained its great accuracy.

My wife managed to smack a little mule deer buck with it from about 200 yards.

Taurus Defender 856 TORO 38 Special Revolver

pistols, Product review, Shooting hardware, , ,

Introduction

For years I’ve had a very challenging relationship with Taurus firearms, I have had in the past an experience that left me quite displeased. But after some time I have meandered back into a place where I would try again, the TX22 line of rimfire pistols got me quite hooked on 22’s. And years later I’ve got four of them. But today we are looking at a new product from Taurus, the Taurus Defender 856 TORO 38 Special Revolver. The TORO is according to Taurus the first ever optics ready revolver, and being a sucker for red dots and pistols I had to try it.

The Defender 856 TORO

The 856 model has been around for a few years now, and it seemed a good host for optics I suppose because that’s where they went with it. The Defender 856 is a double-action revolver that holds six rounds in its stainless steel cylinder. The pistol uses a three-inch barrel and a target-style trigger for optimal performance. I was expecting a 357 Magnum but the TORO comes with 38 Special chambers, which is fine because I was probably going to shoot a lot of 38 Spl anyways.

taurus 856 toro defender
the pistol worked great with the 407K red dot

What sets the TORO apart is its optics platform that mounts to the top of the sight rail and is affixed with two screws. The plate itself uses the Holosun K footprint, which is also good because I have a Holosun 407K that would fit perfectly. The TORO is finished in a matte black, which turns out is pretty sexy in my opinion.

Unboxing the Taurus Defender 856 TORO 38 Special Revolver

Upon opening the box I was surprised a bit, as I was expecting something a bit different like I’d seen on the floor at SHOT Show. This model actually looked better in my opinion and as I lifted it from the box my first thoughts were about how handsome a little gun it was.

After opening the cylinder and checking everything out, I held the gun and pulled the hammer a few times. Like most revolvers I’ve ever shot, I found something romantic about the drawing back of the hammer. The trigger felt good as well, nothing fantastic or extraordinary but certainly good. Everything fits tightly and rolled like it was on bearings.

I pulled the optics kit from the box, and found the plate and mounting screws. I took it to my bench to get it mounted using a drop of Loctite to secure the screws. I then installed my Holosun 407K and secured it with its own two screws. I again lifted the pistol into the shooting position to see how the Holosun showed; “pretty slick” I muttered to myself. So I grabbed a sack of 38 Spl hand loads I had sitting on my bench and headed out the door.

taurus 856 toro

To the Range!

As I lined up at my shooting spot, I contemplated what this little revolver would be good for. It’s certainly small enough to easily conceal and use as a CCW, though I am one of those that feel much better about carrying 15+ rounds for such purposes. But it still would be a great little pistol to have in a pinch.

I loaded a handful of cartridges into the cylinder and snapped it closed. I like how tight and timed this gun feels, the cylinder doesn’t have any slop and locks securely closed. I tapped the button to power up the Holosun, and it looked close enough to not even mess with it until after shooting a few shots. So that’s what I did, I fired the first cylinder of cartridges and as I expected I loved every minute of it.

taurus 856 defender
I also installed the new Vortex Defender red dot, it was a perfect match.

The Holosun really needed no adjustment for now, so I let it be as I fumble another cylinders worth off cartridges out of my pocket. I also had brought a few boxes of factory ammunition, but I was lucky to have inherited my Grandfather’s supply  of 38 Spl handloads. Grandpa was a huge fan of the little 38, and he cast thousands of 148 grain semi-wadcutters loaded into spent nickel cases he brought home from the police ranges back in the 80’s.

I spent the late afternoon and into the evening shooting the little TORO at just about anything I could. It seemed about as accurate as any other three-inch revolver I’ve ever shot, I can’t help but feel that the red dot allows some additional precision in aiming though that could just be my personal bias.

Pros and Cons

Pros:

  • Comfortable grip
  • Light recoil
  • Quality fit and finish
  • Red dot sight easy to aim

Cons: 

  • Larger grip would fit my hand better
  • Trigger slightly jumpy

I guess I am warming back up to Taurus after all these years, and I have certainly grown to like this little pistol. The grip is very comfortable, and the rubber texture does allow some additional purchase to hold it back. The 38 is not a large recoiling pistol but its not a 22 either. I would have liked a slightly larger grip to fit my hand, but of course that would have made it harder to stash. I let a few friends shoot it as well that had smaller hands than I and they didn’t seem to have any issues with it.

The quality of the TORO was great, the fit and finish looked quite handsome and well put together. The trigger was a little jumpy but I suppose it’s fine, by jumpy I mean there can be felt movements before it breaks sometimes. It seemed perfectly serviceable for a pistol of this type and price point. The added function of the red dot made shooting the TORO quite easy, instead of focusing on the sights I’d just cover the target with the dot as I squeezed the trigger. The red dot lined up pretty closely to the built in iron sights, which made it easy to co-witness and matched my natural aim-point.

Read Conclusion Here…

CONCLUSION

Taurus Defender 856 TORO .38 Special Revolver

The Taurus Defender 856 TORO has turned out to be quite a breath of fresh air for me. When I first saw a red dot mounted on a revolver, I thought maybe we’d reached the bottom of the barrel. I was happy to be proven wrong.

I think it’s a great little handgun. It’s fun to shoot and accurate enough to be useful, especially at the affordable price point. I’d like something a little bigger for my hand size, but I was still able to shoot it well. If you want to try something new, the Taurus TORO revolver is certainly worth a shot.

-CBM

CVA Cascade 350 legend

Product review, Shooting hardware, ,

Introduction

CVA started out making muzzle-loaders back in the 1970’s, but has continued to grow into a much larger company with an ever expanding product line.  Their muzzle-loaders have modernized the more primitive ancestor to our modern firearms, and have been among the top selling muzzle-loaders for some time. Today we are talking about one of their more recent developments, the CVA Cascade is the companies first venture into centerfire bolt-action rifles. The Cascade is a bolt-action rifle using a three-lug seventy-degree bolt, and fed by a detachable box magazine.

The Cascade is available in many different and popular short and long-action cartridges. It comes in a synthetic stock available in either a grey color or their custom camo pattern. The rifle I am reviewing today is chambered in the 350 Legend cartridge, a great choice for short range hunting and one I am familiar with already. What remained unknown to me was whether or not the Cascade would meet my needs in a deer rifle.

A first bolt-action

After some initial inspection of the Cascade, I came to the conclusion that CVA had done a little homework before making this rifle. The three lug bolt is indexed on the keyway-like bolt-catch on the left side. It works double time by keeping the bolt timed properly, and acts as a stop when pulled to the rear.

The action reminded me of the Ruger American action, they seemed quite similar though each has its benefits. The seventy-degree bolt-lift was very refreshing, I’m a big fan of easy to run bolts and this one is certainly that. The short lift and smooth stroke make the bolt very easy to run, and run fast.

The glass-filled nylon stock has a soft touch finish making it quite grippy and comfortable, the model I received came with the Veil Wildland camouflage pattern. Up front there are two sling sluds to instal both a sling and a bipod which is quickly becoming standard equipment. The safety is mounted on the right side of the action tang.

Underneath the rifle is the detachable box magazine, released from the front with a flush-mounted release lever to avoid accidental release. The magazine is made from a polymer blend, and holds five 350 Legend cartridges. I assume the other short action cartridge magazines are slightly different than this straight-walled 350 L magazine.  The twenty-inch barrel is threaded 5/8-24 at the muzzle for those that want to add muzzle embellishments.

Range Prep

Before hitting the range with the Cascade, I needed to get a few things squared away. I mounted up a good scope from Crimson Trace in a set of Warne 30mm rings, I was pleased to find out that the Cascade is compatible with Savage 110 Accu Trigger Scope bases. This may not sound like much, but being a very popular pattern opens the door for you to use a wide variety of quality scope mounting components.  Once I had everything mounted level and eye relief set, I torqued down the rings.

Next I installed a Harris bipod on the front sling stud, I rarely shoot without a bipod of one kind or another so I knew I may as well install it before leaving. I also grabbed my Yankee Hill Machine Nitro N20 suppressor, being a titanium 9mm suppressor and rated for the 350L I figured it would be a perfect companion for the rifle. All that was left was some ammunition procurement to make as many holes as I needed to.

Rangetime

It was time to have fun with this little rifle, so I loaded up my gear and headed into the snowy Rocky Mountains to see what it could do. I spend a lot of time hiking through these mountains, and I always have a rifle with, and they are usually much heavier than this one. It was very refreshing to feel the light weight of the Cascade in my hands, it was easily carried one-handed with the grippy finish of the stock.

This rifle would be excellent for deer hunting in near any country, but I think the 350 Legend cartridge is better suited for flatter country. For these big Rocky Mountain spaces I would feel better with the rifle chambered in 7-08 or 6.5 PRC, or one of the many other excellent cartridges you can get the Cascade chambered in. This 350 Legend is better suited for shots inside two or three-hundred yards where its energy is still high.

Shop CVA rifles here (even if its a muzzleloader I wont judge you)

I had bore-sighted the rifle prior to leaving the house, so I was ready to shoot the rifle on paper as soon as I’d setup my target. After adjusting a few shots to get a solid zero, I fired my first group to see if the Cascade lived up to its one MOA guarantee. The first two groups were not what I would consider acceptable, but I can assure you that can be squarely blamed on the ammunition. I was shooting Winchester 145 grain ammo, which is notorious for inconsistency. I would probably have thrown it out if ammo wasn’t such a hard thing to come by, instead I figured I would just harvest the brass from it by using it up. Once I switched over to a better ammunition type, things certainly looked better. Three shots were easily one MOA or better, which made me feel much better about the ability to hit a deer should I need to.

Shooting some Federal 180 soft point ammo definitely produced some better results, and being expanding bullets they would obviously be much better for hunting as well.

I spent the rest of the afternoon getting comfortable and familiar with the Cascade. I really like how smooth the bolt runs, and the polymer magazines are perfectly slippery to let the rounds slide into battery. The trigger feels great, and is easily anticipated to control where you place your shot. Adding a suppressor to the rifle was a brilliant move on my part, the Legend is a fairly tame cartridge, and once suppressed it is even more pleasant to shoot.

Pros and Cons

The Cascade does an great job representing CVA’s first bolt gun. The quality and finish of the rifle are commensurate to its price point, and it holds its own on the range. As I mentioned I think the only thing I would change about this rifle is the chambering, I would love to have it in the 7-08. The fact that it is compatible with Savage scope mounting adds value by vastly opening your mounting options. The nylon stock could be better but it could also be far worse, I wont complain about shooting with it. The detachable box mag while perhaps a little cheap feeling functions flawlessly, and the factory threaded barrel saves you time and money if you want to add a brake or suppressor.

And to top if of, it is simply a handsome rifle. The camouflage pattern looks great, and fits into a great many landscapes.

Read the Conclusion Here

Final thoughts

The CVA Cascade is a great venture into the bolt-action rifle world. I like that CVA didn’t start out with a no-frills bargain-basement rifle destined to sit behind glass in a Super Walmart sporting goods department.

The Cascade fits right into the large group of sporting rifles that perform well enough to make you wonder how we’ve come so far in firearms manufacturing. It wasn’t that long ago that bolt guns made inexpensively with cheap imported parts weren’t worth the ammo you’d waste shooting them.

But nowadays, it seems like you can get a great performance from what was once a bargain price. If you’re looking for your next deer rifle, the CVA Cascade won’t disappoint.

-CBM

Sig Sauer MCX Spear LT 5.56 SBR

Product review, Shooting hardware, , , ,

INTRODUCTION

There has been a lot of talk lately about the new Sig Sauer MCX Spear. However, there is also another version… Today, we are diving into a Sig Sauer MCX Spear LT review.

Having had a little experience with previous versions of the MCX I was excited to see this new variant. Today we will be looking at the Sig Sauer MCX Spear LT, which is an 11.5-inch 5.56 rifle, making it an SBR.

The Spear is a perfect candidate for the EOtech EXPS3

The MCX Spear is a short-stroke piston-operated carbine. It utilizes a spring and buffer system that is housed in the upper portion of the receiver. This has removed the classic AR-type rifle buffer tube where the butt stock was typically attached.

Do you need a Spear LT of your own? Click Here

By removing the buffer tube, the role of the Spear can be further adapted to different uses. It can be removed entirely to be used as a “pistol,” or it can be fired with its folding butt stock folded to the side.

The MCX Spear uses many features and familiar parts for AR-15 owners, but I was surprised to see how many differences there were, even with parts that are shared.

The Spear brings with it the incredible adaptability that MCXs are known for and the robust reliability that Sig has rightfully retained. This newest member of the MCX family brings a lighter handguard with improved fasteners to increase rigidity.

Within the handguard is a lighter profile barrel to reduce the weight of the rifle. Inside the rifle’s receiver, there are ambidextrous controls with both safety and bolt-catch on either side of the rifle, and seated in the bottom is Sig’s Flatblade Match Trigger.

I’ve been a little bit of a Sig fan for a few decades, so I was very excited to play with this rifle, and after just a few minutes of handling it, I was hooked.

The quality of the rifle was apparent in every little thing I inspected. Outstanding craftsmanship and perfect lines that all matched up made the rifle incredibly pleasing.

SIG SAUER MCX SPEAR LT REVIEW

SPECIFICATIONS

Caliber 5.56 Nato
Capacity 30 rounds
Barrel Length 11.5 inches
Barrel Twist 1-7 inches
Overall Length 29.5 inches
Width 2.9 inches
Height 7.5 inches
Weight 6.9 pounds
Muzzle Threads ½-28 TPI
Color FDE

PROS & CONS

PROS
  • No buffer tube, fires from folder or without stock
  • M Lok compatible
  • Short Stroke piston operating system
  • Very nice trigger
  • Quality controls all around
  • Adjustable gas block
  • Fully ambidextrous
  • Interchangeable barrel capacity
  • Multiple calibers (5.56, 300blk, 7.62×39)
  • Handsome as the day is long
CONS
  • Rokset muzzle device
  • SBR requires interaction with tyrannical government

ON THE RANGE TESTING

sig sauer mcx spear lt hands on test at range

The MCX Spear was begging to be shot, so I wasted no time.

We took the rifle to a local range which typically, for me, is a non-starter, but today I would make an exception. With an EOtech mounted on top, it was time to cook the tip of the Spear. Today we were shooting some Hornady Black 62 grain FMJ ammunition, which would work great in the MCX’s one in seven twist.

I played with the folding stock for a moment, if only to familiarize myself with it. Pushing on the button with a lifting motion released the dovetail lock of the stock.

With the stock folded off to the side, the rifle supremely compact; only a bullpup could have been much shorter and still maintain a reasonable barrel length.

Shooting the Spear like this would have been easy, but I couldn’t bring myself to shoot it like a pistol, especially after all the legwork of a form four.

With loaded magazines and open range I fired a few rounds, which were quite mild. Small caliber rifles of this size are a joy to shoot. I would have enjoyed it, even more, had Sig not used Rokset on the muzzle brake. Who would buy this thing only to run the factory flash-hider?

To be fair it would be someone with a Sig suppressor that mounts to the brake, but I am not that guy. So I was kind of chapped that it would have taken significantly more effort to remove the flash-hider, so I chose to leave it alone for now.

Shop Sig Sauer firearms here, you know you want one…

But I would have loved to shoot it suppressed to see how the rifle worked and if the dual gas settings were acceptable. The eleven-inch barrel definitely needed a flash hider because it launched some serious fireballs.

Shooting the MCS Spear was pleasant as can be, the Sig grip had a very comfortable angle, and the handguard filled the support hand too. The short size of the rifle can, at times, get your support hand a little close to the muzzle, another reason I would have liked to suppress it. The diminutive size of the rifle also made it easy to balance and maneuver.

sig sauer mcx spear lt hands on test at range jeff wood

The MCX Spear isn’t what I’d consider a precision rifle, nor would many folks imagine. That said it was easy to keep shots on target at one hundred yards with no magnification. After fudging with the EOtech holographic sight to get a dirty zero, it was easy to keep the shots within an inch or two of the point of aim.
I love the controls of the rifle. The safety was smooth and easily put into either position. The ambidextrous mag releases were right where I expected them and functioned with minimal effort. The ambi bolt-catch made for quick reloads using the trigger finger to send the bolt home after loading a fresh magazine.

It’s also handy for locking the bolt back for inspection or other purposes.

The other finishing touches of the MCX Spear were things like the steel QD sling cups that were fit into the different parts of the rifle. I even disassembled the rifle a bit to see how the piston system and barrel clamp worked.

The handguard was easily removed by two screws and a take-down pin. It slides on a tongue and groove with the monolith top rail of the upper receiver. Underneath, I found the barrel trunnion with two clamping screws; I tipped my hat clean off as I figured out the cunning design Sig had devised.
The two screws work dual purpose as they house a pair of jaws with a tapered face, and they marry an opposite tapered face on the front of the barrel extension. As the screws are tightened, the jaws draw the barrel extension tight into the barrel trunnion block.

Once snugged down, the screws’ second purpose begins to apply clamping force to each side of the split trunnion. Once tight, the barrel extension has been seated tightly against its mating face ensuring accurate head spacing. And the clamping force holds the barrel tight into place.

Besides its intricate manufacturing and design, the MCX Spear LT was just plain handsome! The Coyote finish is a beautiful shade, and the coatings of the other parts were equally immaculate. Every little thing seemed well thought out and executed, and after shooting over a hundred rounds on the first trip, I already loved this rifle.

RELIABILITY

During the course of several hundred rounds, the MCX Spear LT worked flawlessly. I experienced no malfunctions during testing.

ACCURACY

The Spear LT isn’t exactly made for precise shooting, but it is more than accurate enough for the typical duties of a short-barreled rifle.

OVERALL FEEL

You may have gathered by now that I am quite happy with this rifle. Everything about it feels good and aesthetically pleasing to my eyes. The coatings, finishes, and every little edge are cleaned up, and it functions as good as it looks.

FEATURES

BUFFER TUBELESS ACTION

The dual-spring buffer rides above the bolt carrier in the upper receiver, part of which hangs down to engage the top of the bolt carrier.

By moving the whole recoil operation into the upper receiver, the stock options of the rifle can be changed to near any configuration, or none at all. The already short Spear LT can be further shortened and fired with a folding stock.

AMBIDEXTROUS CONTROLS

The ambidextrous controls of the Spear LT are convenient regardless of your preferred shooting stance. My favorite part is the right-side bolt release, which makes it extremely easy to reload. As you insert a fresh magazine, you can immediately charge the rifle with your trigger finger while your support hand finds its way to the handguard.

With controls on both sides it makes the rifle even easier to operate and obviously much friendlier for left-handed shooters.

sig standard mcx vs mcx spear lt
On top is the SIG standard MCX compared to the MCX Spear LT on the bottom.

FOLDING BUTTSTOCK

The Sig folding buttstock attaches to a vertical pic rail at the back of the lower receiver. The simple construction of the stock appeals to the minimalist in me, with very few things to go wrong.

They even added a small polymer cover where your cheek might touch the stock, which was one of my complaints with the original MCX. Adding a steel sling cup to the back also gives you more sling options.

ADJUSTABLE GAS BLOCK

As I’d already mentioned, I wasn’t going to try and get the muzzle device off this rifle. Much to my dismay, as one of my favorite things to do is test suppressors on different rifles. I would have loved to see how the two-position gas block would have fared with a couple of different suppressors on it.

It is certainly nice to know that the option is there, though I don’t think it would be too hard for Sig to make a three or four-position to give a little more customization options.

LIGHTWEIGHT HANDGUARD

The lightweight handguard of the MCX Spear is comfortable and easy to work on.

MLok slots all over give the user many options to customize the rifle and put accessories where they want them. And if you choose to swap the barrel out of your rifle, the handguard is easily removed to allow access to the barrel trunnion and its clamping screws.

TRIGGER

sig sauer mcx spear lt close up trigger grip controls

The Flatblade match trigger in the Spear was outstanding. A much better trigger than I anticipated in an SBR, and it likely helped with accurate shooting.

This is the kind of trigger I would expect in a nice DMR-type rifle, and it was very welcome for me.

HOW WE TESTED

I shot the MCX Spear LT over a few range trips, using the aforementioned Hornady ammunition and some PMC Xtac 55-grain ammunition. For the majority of the shooting I used an EOTech holographic sight, which I might add is an excellent option to go with the Spear.

Shooting the rifle was mostly done at closer ranges, mainly because I think that’s where rifles of this configuration shine. Pulling the rifle out in a vehicle showed how handy the little SBR can be, and shooting it from the folded position also put its utility on display.

Reloading the rifle was smooth and seamless, mainly due to the ambi bolt-catch I already mentioned. The Pmags flowed in and out of the magwell through a great many reloads, and it felt like the kind of rifle you’d want in a gunfight, should such a thing happen.

AMMO USED

sig sauer mcx spear lt close up with Hornady black ammo

Hornady Black ammunition was used for the majority of my testing. The 62-grain load worked great in the rifle. I also used several boxes of the PMC Xtac 55-grain ammo and some Frontier 55 grain HP loads. All of them worked well, but the 62-grain load was for sure the best in this rifle.

SCORE CARD

RELIABILITY (10/10)

Rifle ran flawlessly for the duration of my testing.

ERGONOMICS (10/10)

With the customization utility of the MLok handguard, I think you could set this rifle up to be perfect for you. Out of the box, it is not bad at all, either.

CUSTOMIZATION (9/10)

The buttstock options, while awesome, are also slightly limited. I’m still mad bout the Rokset muzzle brake.

APPEARANCE (10/10)

Dead sexy. Nothing more to say.

VALUE (9/10)

The Spear LT is not inexpensive, with a street price of around $2500.00 it could be tough for many to justify. But if you were ever gonna splurge on an SBR, splurge here.

CONCLUSION

sig sauer mcx spear lt review

The Sig Sauer MCX Spear LT is an excellent choice for a defensive rifle, a sport rifle, or really for almost any other shooting activity suited for an SBR.

It brings Sig’s high quality and service standard to a very handsome and usable rifle without having the large footprint of a full-size rifle. If you are in the market for a good SBR that you’d want in a life-or-death situation, the MCX Spear LT would surely be at the top of my list.

-CBM

Read the conclusion here…

PSA Dagger 9mm

pistols, Product review, Shooting hardware, , , , ,

INTRODUCTION

Palmetto State Armory (PSA) has been a big name in the firearms industry for some time. Their mission of arming law-abiding Americans has brought affordability and options to many. Whether it be MSR rifles, parts, or accessories, PSA sells it, probably in seven different colors and calibers. Today we are going to review one of PSA’s own productions, the new PSA Dagger SW3 9mm pistol.

The Dagger is a polymer-framed striker-fired 9mm pistol with incredibly similar features to the venerable Glock 19. That is no mistake either. The popular pistol has been copied, cloned, and customized by countless manufacturers.

But what makes the PSA version different you might ask? Well, that’s what Gun Made is here for; we’ll show you.

The Dagger utilizes fifteen-round flush-fit Glock magazines and is available in too many different models to mention. There are threaded and non-threaded barrels, extreme carry cut slides, night sights, optic-cut slides and so on.

I would recommend you go browse their selection as there is surely one you will like.

There are many advantages to the Dagger, and most of them are related to its kinship with the Glock. Magazines and other parts can be used to customize the pistol if one of the many models doesn’t perfectly fit your fancy.

The polymer frame is textured nicely to give the shooter a good purchase on the grip area, and the undercut trigger guard allows you to ‘choke-up’ your hand into the grip and seat the pistol deep into your grip.

The trigger features a flexing shoe safety, similar to those I’ve seen on S&W M&P pistols.

The Extreme Carry Cuts and Gatormouth slide add some custom detail to the pistol, and add to the gripping area of the slide while reducing weight. The slide itself is stainless steel with a Cerakote finish and topped with Tritium Tru-Glow night sights.

The 1-10 twist barrel inside has a hard DLC coating for durability and long life.

psa dagger disassembled parts

Upon receiving the Dagger, I wasted no time in giving it a thorough look over. And I must confess I was quite impressed with the little pistol; not only did it feel quite robust and smooth, but I had no idea they could be purchased for as little as $259.

The model shown here goes for about $60 more, but if this thing lives up to my hopes, I’d consider it a steal for that price.

DAGGER 9MM REVIEW

SPECIFICATIONS
Caliber: 9mm
Capacity: 15 rounds
Action: Striker Fired
Weight: 22.4oz (unloaded)
Overall Length: 7.15″
Overall Width: 1.28″
Overall Height: 4.78″ (Without Mag)
Barrel Length: 3.9″
Twist Rate: SAAMI Spec 1:10
Slide Finish: Cerakote, Flat Dark Earth

PROS & CONS

PROS
  • Very Affordable
  • Lighter than a Glock 19
  • Magpul Magazines
  • DLC Barrel coating
  • Cerakote over stainless finish
  • Picatinny accessory rail
  • Included night sights
  • Striker block and trigger safety
CONS
  • I couldn’t come up with something to dislike

ON THE RANGE TESTING

With the Dagger in a holster and several boxes of ammunition I headed out into what we call springtime here in Utah. After a short ride on my snowmachine, I found myself at my spot, and after hanging a target, I started loading magazines. I’d never loaded a Magpul Glock magazine since I’ve never owned a Glock; they do feel stiffer than I expected.

With fifteen rounds in the magazine, I chambered a round and prepared to shoot. The lockup feeling as the slide closed felt great, and I tightened my grip around the pistol as I settled the sights on my target.

OVERALL FEEL

The Dagger felt great in the hands; it really does feel above its price-point.

The trigger isn’t anything out of this world, but I certainly wouldn’t expect it to be for a CCW pistol. I kind of expected it to be a little long, and a bit stiffer than I would normally like. Turns out I was pretty much spot on. I wouldn’t consider myself a trigger snob, but I do like a good trigger, and this one impressed me as pretty standard.

I broke one shot after another, listening to the trigger reset between shots. After emptying my first magazine, I gave the pistol a good look over to ensure everything was in place before reloading.

I carried on through magazine after magazine of Magtech 124 grain FMJ ammo. I was very pleasantly pleased with how the Dagger felt in my hands and how it pointed so well. Every time I’d lift the pistol, the sights were lined up on my target.

The snappy recoil was easily controlled, and follow-up shots came fast and accurately. I’m also not a competition pistol shooter, so I wasn’t expecting to be particularly accurate with the Dagger. And yet I felt quite confident at hitting what I aimed at after just a few magazines.

I holstered the pistol and drew it from retention quite a few times. Since this is sort of a CCW-focused pistol, I figured I would try and simulate drawing it. Again, everytime as I drew it from the holster, it would come up on target for a good clean shot. Well, almost every time.

Shop PSA pistols and accessories

RELIABILITY

The Dagger was very reliable during my testing; no significant malfunctions or jams occurred.

During my range time, I experienced no malfunctions other than one time the pistol failed to lock back upon emptying the magazine. The magazine appears to make good contact with the slide-lock, so I’m not sure if there was another issue or if maybe my thumb was riding the release. But I haven’t been able to repeat it yet.

ACCURACY

Accuracy was perfectly acceptable; I would like to shoot another one with the red dot sight.

The Tritium sights were great for targeting, even though I’m a bit of a red dot kinda guy. But the nice thing is that you can certainly get the Dagger with a cut slide for your red dot.

psa dagger hands on review and range test

FEATURES

POLYMER FRAME

The lightweight polymer frame with its grippy texture felt great in my hand; the slippery polymer allowed the magazines to drop free easily and seat properly as well. The mag release is not reversible.

TRITIUM NIGHT SIGHTS

The low-profile night sights work well for targeting, and they were unobtrusive. I think they could be improved by perhaps rounding off the edge to reduce the likelihood of snagging.

CARRY CUT SLIDE

The carry cut slide reduces weight and also gives an excellent grip area to cycle the pistol. I suppose it is possible that the large cuts allow more dust and debris to enter the pistol, but as long as you have it holstered, I don’t see a problem.

psa dagger hands on review and range test

HOW WE TESTED

During the course of more than a couple of hundred rounds, I got a good feeling for the function of the PSA Dagger. Shooting many courses of double taps, reloads, and other typical pistol drills.

I carried the pistol as my CCW for the better part of a month in a compatible OWB holster.

Part of my daily interaction with the pistol included repeated drawing and presenting of the pistol, and when in the right kind of place, shooting a few rounds to see how well I could place them under time limits.

It didn’t take long to see why these style of pistols are so popular. It was relatively easy to get comfortable and present some modicum of proficiency.

Shooting the pistol on the range got me very comfortable with the Dagger, and after spending a few weeks and boxes of ammo shooting the pistol I was very happy with the performance.

AMMO USED

For this review, I used Magtech 124-grain FMJ ammunition, and it worked great.

psa dagger unboxing for review

SCORE CARD

RELIABILITY (9/10)

The Dagger worked almost perfectly and flawless during my shooting. The controls felt and functioned perfectly.

ERGONOMICS (9/10)

The Dagger felt fantastic in the hands. I think the only way you could improve it would be to add some kind of adjustable backstrap or grip.

CUSTOMIZATION (8/10)

The incredible custom options of the Dagger allow you to get almost anything you want in the pistol. The various colors, slide, and barrel options make it easy to please nearly any shooter.

APPEARANCE (9/10)

The Dagger is a handsome pistol; again the custom options make it more so. The finish and look of the pistol are every bit as good as the famous Glock pistols they mimic.

VALUE (10/10)

I was literally blown away when I saw the price of these pistols. I had played with and shot the pistol quite a bit before I looked and saw the street price of the pistol as tested was only $359.00

Continue Reading Here…

CONCLUSION

Palmetto State Armory has certainly hit a major goal in its mission of arming America.

The PSA Dagger is an outstanding value. I think it would serve as a perfect start for someone who is new to the firearms game and looking for an economical entry.

The great features and function of the Dagger come not just at a good price but with market compatibility and customizability.

I have no doubt these pistols will be very popular with the American shooting public. I myself look forward to seeing how this pistol continues to kick.

The only thing left to do is shoot a few thousand rounds through it. That might take a while, so follow along if you’d like to see how that goes.

-CBM

Check out our other pistol reviews here

Shadow Systems DR920 9mm pistol

pistols, Product review, Shooting hardware, , , , ,

INTRODUCTION

When I first started showing my Shadow Systems DR920 around, lots of folks would respond with, “nice Glock sir, but this is a Wendy’s”. I know it looks like a Glock, and surely shares a lot with them, but I was determined to see it differently.

In the interests of full disclosure, I’ll give some background. I’ve been a Sig fan-boy for twenty years, and while it would be silly to deny the success of the large family of polymer-designed pistols, I just never really liked them. Friends would get one, I’d handle them at a shop, but I never felt like I needed one bad enough to spend my money on one.

Now to be fair, the Shadow Systems family of pistols (DR920, XR920, MR920) are not just Glopies of the Austrian pistol. Shadow Systems pistols utilize many interchangeable parts but are also their own, the DR model pistol is comparable to the Glock 17.

The DR920 pistol is made with law enforcement in mind and built for duty purposes. The frame features an oversized beaver tail and interchangeable grip backstrap to accommodate different-sized hands.

The grip is textured for additional grip and control while shooting, and the trigger guard is undercut to allow additional purchase for a better grip. The flat-blade trigger has a 4.5-5 lb break and feels pretty clean.

shadow systems dr920 disassembled

The DR920’s slide is aggressively cut to provide additional purchase both at the front and back of the slide. It’s also cut for optics, so you can add your favorite red dot. Most red dots can be mounted without the use of adaptor plates like many other pistols use.

After a fairly short time with the DR920, I was quite quickly enamored with it, despite my distaste for pistols of this type. But how far down the marriage aisle would I get with this polymer-framed beauty?

SHADOW SYSTEMS DR920 REVIEW

Let me backup a bit; there’s more to this story than I’d let on.

A few months prior to this event, I found myself in the freezing desert of Wyoming, shooting an assortment of pistols belonging to my baby brother. Among the many was another Shadow, a different model but close enough. I’d already explained to him that I wasn’t big on that particular type, but he was adamant that I try it.

After only a few rounds, I found myself quite surprised at how well I could shoot it, and how good it felt in my hand. So when the opportunity to get my own Shadow, I figured I better pick it up.

shadow systems dr920 hands on review in snow

The DR920 promises to bring service-grade reliability with superior quality to a 9mm polymer-framed pistol. They are marketed toward shooters needing a high-grade pistol for durable service in any condition.

While the pistol may share some features with other common pistols, it brings additional qualities which will demand a higher price. Let’s see if it’s worth it…

SPECIFICATIONS

Caliber 9mm
Capacity 17 rounds
Action Striker fired semi-auto
Length 7.75”
Height 5.25”
Trigger pull weight 4.5-5 lbs
Weight 22.4 ounces
Sights Front dot, serrated rear
Barrel Twist 1-10

PROS & CONS

PROS
  • Same size and pattern as the Glock 17
  • Huge aftermarket support
  • Optics ready
  • Adjustable backstrap grip
  • Match Grade barrel
CONS
  • I’d like a more pronounced mag release
  • I wouldn’t mind a slicker trigger (less friction)
  • I’ll add a flared magwell
shadow systems dr920 hands on review range test

FIRST IMPRESSIONS

My first trip to the range with the DR920 was a quick one, and it didn’t take long to feel it out.

Running seventeen-round Magpul magazines, I stuffed a pile of cartridges in and loaded the pistol.

Cracking the first few rounds, I went slowly just to see how everything felt. To my surprise, the pistol recoiled a little more than I had expected. It wasn’t bad or anything, just a touch more than I had anticipated.

I ran through several magazines, running them dry til the gun locked open. I smiled a crooked smile to myself there in the pistol bay, and I thought to myself; I may end up loving this gun.

Those first fifty rounds went way too quickly, so I went to get more.

After several range trips and not as much ammo as I would have loved to shoot through this gun, I have gained a shine for it.

I’ve shot nearly five-hundred rounds through the pistol so far, and it hasn’t hiccuped yet. That should come as no surprise from a pistol with this pedigree. The natural aim of the pistol in my hand lined up very well; every time I presented the pistol, the sights were already on target. This made the pistol quite easy to shoot well, in my opinion.

During a later trip, I installed a Holosun 407K to see how I liked the gun with a red dot. It came as no surprise that I enjoyed it further still, as I prefer shooting pistols with red dots.

Shooting the Shadow was very comfortable and familiar. There are a couple of things I think I might change. I would like a flared magwell, and it looks like Shadow Systems has them for sale on their website, so I might get one on the way.

Not a huge deal, but it would probably help me stab magazines a little faster. And I’m definitely going to get some more magazines for it.

shadow systems dr920 hands on review close up

RELIABILITY

The pistol functioned flawlessly for the duration of my testing, with no malfunctions or failures.

ACCURACY

The DR920 was perfectly acceptable, in my opinion, as far as accuracy is concerned. Hitting 50% IPSC targets at 25 yards was easy; I don’t shoot pistols much further than that in any case.

OVERALL FEEL

The textured grip felt great in my hand, and the grip angle was perfect as well. Trigger and other controls were easily manipulated and comfortable. The adjustable backstrap made it easy to fit the hand.

FEATURES

FLAT-BLADE TRIGGER

The flat-blade trigger was smooth and clean to break. It’s a service pistol, so I wasn’t expecting it to be super light or short. I suppose I wouldn’t mind if it was a little lighter or less friction.

shadow systems dr920 trigger and grip

OPTICS MOUNT

The Shadow slides come pre-cut for optics. With threaded holes for various optical mounting patterns.

The idea is to be able to mount a red dot without needing a mounting plate. Instead, Shadow Systems includes a set of small polymer spacers that can be used to place in front of or behind the optic to fill any voids. I had no problem mounting red dots to it.

shadow systems dr920 slide and mount

SIGHTS

When I first opened the box, I almost thought the gun came with suppressor sights, but they are just slightly taller sights than normal.

I actually quite like them as they always lined up with my target upon presentation. And once the red dot was added, they all co-witnessed, which I believe is a requirement for many LE agencies.

shadow systems dr920 mounted with red dot

ADJUSTABLE BACKSTRAP

The DR920 came with a baggie of different backstraps that are easily swapped out by simply pushing a pin out with their provided tool. The backstrap then slides down and off the frame. Then you reverse the process to install the backstrap of your choice.

shadow systems dr920 with grips

TEXTURED MAG RELEASE

The textured mag release works fine, but I wouldn’t mind a slightly taller version. It seemed just a touch more out of the way for my thumb than I would have liked.

ACCESSORY RAIL

The pistol also features a typical accessory rail under the front of the pistol, perfect for mounting a weapon light. I installed my Surefire X300 with no problem; it’s pretty hard to mess this up.

Continue reading here…

shadow systems dr920 with holosun 407k mounted and reloading