Category Archives: Shooting hardware

Rifles and their parts

Aero Precision X15 5.56 carbine

February 13, 2023Product review, Shooting hardwareaero precision, ar 15, x15coldboremiracle

Introduction

There is something to be said about a rifle that is near perfectly balanced and maneuverable. Today I am here to share with you one of those rifles, an AR-15 that just feels perfect in my hands, the Aero Precision X15 5.56 carbine. Built from an Aero Precision M4E1 lower receiver and mated with a lightweight eighteen-inch upper and barrel.

What makes a perfect carbine?

Obviously, that varies for most of us, but I’ll tell you what I think this carbine is perfect for. The lightweight barrel and handguard assembly make this rifle very balanced, and it has a very effective muzzle brake as well to help reduce any recoil or muzzle rise.
A fairly minimalist Magpul MOE SL-K buttstock also helps keep the weight down but still offers all the agility and modularity I’d want for shooting on the move. The trigger in this rifle is nothing extraordinary, but it breaks clean enough to shoot accurately.

On top of the rifle is a Vortex Crossfire II 1-4 LPVO, I know some of you are gonna disagree with me here but I like this scope for this gun. Apart from a good color combination, I think the 1-4 power is great for a rifle intended to shoot n’ scoot.

Any kind of shooting scenario where you expect to be rapidly moving and engaging targets from fairly close distances would be a great. That could be a two or three gun competition or a car lot in Wisconsin, but you’d find yourself pretty well equipped with a little carbine like this.
Your idea of a perfect carbine might be a little different than mine, I have no issue with that as ten years from now we may have swapped opinions.

Good Parts

Good parts make a good rifle, and while the X15 receiver from Aero may not be the greatest or best of all time but it is still a good place to start. The barrel in this rifle appears to be a Faxon gunner eighteen-inch barrel, it is nitride finished with a nickel teflon coated barrel extension and 5R rifled. Sounds like a winner, but we would see for sure on the range. The handguard is an MLok carbine length from AT3 Tactical, it’s pretty minimalist, and comfortable to hold.

Rangetime

The first time I took this rifle to the range I wanted to basically just prove it out and make sure everything worked together. I was quickly pleased to see that everything was in order and needed no additional attention, it was ready to burn up some ammo.

I ran several magazines through the rifle and I found it to be very controllable, the light recoil was further reduced by the brake making target acquisition quick and easy. I was also impressed that the light weight made it much easier to hold the rifle on target, not just hold it but to hold it still. Something I am not used to due to the heavy guns I usually shoot.
My daughter had come along and wanted to give the rifle a try herself. She too found the rifle comfortable to maneuver and shoot, which further credits the rifle’s handling.

I did put the rifle across some sandbags to see how it patterned. For a proper accuracy test I would have liked to put a better rifle scope on the gun, and perhaps shoot some better ammunition than I had on hand. The Crossfire II scope did work well enough for my purposes however, I didn’t have much trouble hitting what I was aiming at. The best group I came up with during my testing was a 2 MOA pattern, not exactly match-grade shooting but I’m sure I could have improved on that with a little more refined aiming and magnification. Continue Reading Here…

The maneuverability of the rifle was awesome and transitioning between various targets at different distances came easily. I really wish I could have shot the rifle in some kind of carbine match, as that surely would have exposed its weakness and mine. I also would love to shoot it more suppressed – personally I think it’s only proper to do so.

PROS & CONS

Aero Precision X15 — Light and wieldable, the X15 is a perfect example of what makes the AR-15 so popular. (Photo: Jeff Wood/Guns.com)

I can’t say that this rifle is perfect, but it certainly is a great rifle for a lot of scenarios. I love the lightness and clean handling of the rifle. Matched with its flawless function and mean green exterior, there’s little for me to complain about.

As a precision rifle purist, I am always motivated by accuracy. Pencil-thin barrels and carbines aren’t typically the best combination for improving accuracy. But accuracy is defined entirely by the shooter and his or her targets, and for many practical purposes, the accuracy potential shown here is just fine in my opinion.

This rifle is a perfect example of what makes the AR-15 platform so appealing: compatibility with a massive assortment of parts and accessories that seem to mesh in perfect unison.

CONCLUSION

Whether you are putting together a fighting rifle or a competition gun for matches, there is an innumerable selection of possibilities. I find this particular rifle to be fantastic for competitive-style shooting, but not ideal for the type of precision shooting I prefer myself.

The Aero Precision X15 or the more prevalent M4E1 receiver are both fantastic starting points for putting together a rifle, and as you might imagine, Aero has a whole catalog of other parts for your build.

-CBM

Like AR 15 rifles? Check out this one

Sig Sauer MCX 5.56

January 9, 2023Product review, Shooting hardwarear15, mcx, sig sauercoldboremiracle

Introduction to the MCX

You may have been hiding under a rock if you’ve not heard of the new Sig Sauer MCX Spear, the MCX family of rifles has been a popular stalwart in the Sig Sauer lineup for some time. The industry giant has been bringing all kinds of developments over the decades they have been manufacturing firearms, and the MCX is one of them. At a glance, the Sig Sauer MCX appears to be just an AR-15, but a deeper look into the rifle will show something quite different.

The Dawn of Modern Sporting rifles

Since the first Stoner variant of the AR-15, a buffer tube protruding from the rear of the lower receiver has long been commonplace. The buffer tube serves two purposes; first it houses the buffer and spring which are vital parts of the function of the action, and second it serves as the base structure for the buttstock of the firearm. Buttstocks are typically attached around or to the buffer tube itself, which has dominated the design of all the various available buttstocks for AR patterned rifles.
The design of the MCX migrated the buffer spring and its associated hardware into the upper receiver, an in doing so has changed several aspects of the platform itself. Gone are the days of fitting your buttstock to the tube, in fact, you don’t even need a stock with the MCX. There are “pistol” configurations that don’t even utilize a buttstock.
This tubeless design makes the MCX stand out from the AR crowd, but there is more to this gun than just the buttstock.

The Sig Sauer MCX

The MCX shares a great deal of parts with most AR-15 style rifles. Magazines, triggers, and such are compatible, but there are also plenty of differences. The bolt carrier in the MCX is driven forward by a pair of springs that ride just above the carrier inside the receiver. The charging handle also sandwiches into the same area as the recoil springs and bolt carrier. The handguard is attached to the upper receiver and features a very skeletonized keymod attachment section, newer models also have MLok compatible handguards. There is a small window in the front of the handguard to access the two-position gas valve.

Bolt carrier and receivers detail

The lower receiver is very similar to traditional AR lowers except where the buttstock attaches, and additionally features an extra magazine release on the left side of the receiver. There is also a small spring plunger mounted behind the trigger, it appears to be an accurizing add-on to reduce the play between upper and lower receivers. The buttstock itself is a skeletonized design with a built in folding hinge allowing the stock to be stowed to the side of the rifle, this of course doesn’t effect the operation of the rifle. All the mechanics of the operating system are contained within the receivers, so the rifle can fire regardless of the stock position.

Rangetime

As soon as I could, I prepared the MCX for the range. I mounted up a fresh Tango MSR scope also from Sig Sauer, the 1-6 power scope would be an excellent compliment to the MCX. I also grabbed a suppressor because I wanted to see how the rifle functioned suppressed. I packed up some PMC Xtac 55 grain ball ammo to shoot in the rifle, as well as a Magpul MS4 sling to use on the rifle. I also brought a couple assorted P-mags and GI magazines to try in the rifle.

After boresighting the scope, I cracked off the first few rounds and they were quite close to my point of aim. It only took minor adjustments to get the scope zeroed and then it was go time. Shooting the rifle at a hundred yards I quickly gained familiarity with both the rifle and scope, hits came easily as the MCX churned away smoothly. The weight felt surprisingly light, I believe they were advertised at six pounds though I think that is a little under what this one weighed naked.
The three-pronged flash hider seemed very effective at reducing muzzle flash, and the recoil of the 5.56 cartridge is very easy to handle in a rifle this size. The rifle was very comfortable in maneuvering and made for a very enjoyable time spending my money. I stretched the rifle out to the three-hundred yard line where I found it to be still quite accurate, I imagined an errant coyote who might have wandered into range would have been easily dispatched.
Shooting from P-mags and GI metal mags both functioned flawlessly as I would expect from this rifle, I figured it was time to install my suppressor to see how the rifle performed suppressed. This required removing the factory flash hider, and installing my suppressor mount. Sig uses a taper on many of their muzzle devices to aid in alignment, since I wasn’t using a Sig suppressor the taper was unneeded. I mounted up my Yankee Hill Machine Turbo 556 suppressor and went right back to town on the targets.

Suppressed shooting made the MCX really shine. The increased weight seemed to calm down the recoil impulse even further making it easy enough to spot my own hits at 200 yards. The reduced noise is always welcome, and hearing steel targets ring without hearing protection is always better.

Accuracy

Accuracy shown here from the MCX wasn’t spectacular, but I can certainly explain that. The included picture shows five shots from 55 grain PMC Xtac ammunition, it shot much better with Hornady Black 75 gr match but I didn’t get it on paper. Shooting from bags at one-hundred yards with an eight-power scope shivering in below freezing temps may not have given the MCX a fair shake. Continue Reading Here…

Pros & Cons

It was easy to find things about the MCX that I liked. The controls were all comfortable and smooth. There is a little bit of noticeable refinement with many of the little things on this rifle. The reliability and flawless function are definitely at the top of my list, as is the lightweight of the rifle. I really prefer accurate rifles, and this one seemed to have a very acceptable level of accuracy. It seemed enhanced when used with a suppressor. It was perfectly familiar and uniquely exceptional.

Now for the things I didn’t like. These were few, and I’m sure I could probably live with them if needed. The skeletonized buttstock was perfect except for a good cheek rest. It seemed a touch low. In this winter weather, it was way too cold to be resting your face on. It seems like it would be really easy to fashion a simple polymer snap-on cheekpiece that would be unobtrusive and serve that purpose.

Also due to the cold temps, I considered some synthetic material to add to the handguard. Obviously, this could be overcome with gloves, as I imagine the same problem is to be had in the extreme heat.

Pros:

Comfortable and smooth controls
Low recoil
No buffer tube
Reliable
Lightweight
Accurate
Suppressor ready

Cons:

Could use a better cheek rest
Furniture can be cold/hot depending on temps

FINAL THOUGHTS

It came as no surprise that I really enjoyed the MCX from SIG Sauer. I have long been a SIG fan, and the MCX fits perfect into my collection of carbines.

The reliable piston-driven and bufferless system seems to have worked out perfectly for SIG, at least the next-generation MCX Spear would suggest so. This rifle would make a fine addition to your collection if your tastes are similar to mine. It has certainly driven my desire to get the next-generation MCX even more.

-CBM

Ruger Super Redhawk Alaskan

January 3, 2023pistols, Product review, Shooting hardware.454 Casull, 44 magnum, alaskan, ruger, super redhawkcoldboremiracle

Big wheelguns

Powerful revolvers carry more than just a cylinder full of cartridges, they also carry some mystique. The hero of every old Western film always had a big iron to deal justice. While that may not be our purpose here today it’s nice to keep it in mind. Today we are taking a closer look at the Ruger Super Redhawk Alaskan.

Alaskan?

The Super Redhawk line of pistols from Ruger has a long history of performance, but what does the Alaskan do you might say? I suppose the Alaskan model was purpose built thinking of those who might spend time up north. Folks who prefer not to be without six doses of bear medicine. The Super Redhawk Alaskan is a stainless steel double-action revolver, a hammer forged 2.5 inch barrel. It comes with a Hogue Tamer grip to keep a good hold of the gun. You’ll need a good grip because the Alaskan’s robust cylinder has holes bored for six cartridges in only three calibers; .44 Remington mag, 454 Casull, and .480 Ruger. These powerful choices in chambering are nothing to shake a stick at as my father would say. And certainly enough to make even a brown bear reconsider you as a snack.

Considerable size

Despite the large chamberings for the Redhawk, the pistol isn’t so big as to be cumbersome. The short barrel makes it a reasonable gun to carry in a holster, even if you are engaged in other activities. The Alaskan would be a great choice for fisherman who anticipate potential close encounters with awnry eight hundred pound salmon fishermen. Or just someone who is out in rough country and wants to be safe.
The Alaskan is big enough to stand up to the tasks of bear country, and yet small enough to bring along on a fly fishing trip. And even if you aren’t in the cold white north, it alway gives some solace to have a good strong pistol close. I’ve spent enough time in the incredibly dark and remote forests of northern Montana and Idaho to appreciate the comfort of that heavy steel piece riding on the hip. The extra 2.75 pounds is worth having to me.

A pair of Super Redhawks, note fluted cylinder of .44 Mag model

Shooting time

Shooting the Super Redhawk Alaskan was going to be expensive in today’s market. Especially since I had both the .44 Magnum model, and the 454 Casull to feed. Both pistols are dual chambered to allow for shooting lighter loads with .44 Special and .45 Colt cartridges. But I didn’t have any of those, so it was full house power loads from Hornady to test these guns.

I have shot plenty of .44 Magnum over the years, so shooting the Redhawk wasn’t significantly new. Noticing immediately the comfortable grip, which allowed me excellent purchase to control the pistol. The 454 Casull pistol had a bit more power behind it, and you could feel it. Recoil and muzzle blast from the two are fairly comparable, with the Casull showing a bit more unsurprisingly. I was shooting 225 grain Horandy FTX ammunition in the .44 Magnum model, and in the .454 I was shooting Hornady’s 300 grain flat point.

Evaluating the Redhawks Power

Considering the purpose I initially mentioned for these pistols they shoot quite well. A dangerous game defensive pistol like this certainly needs to hit what your aiming at. I found both pistols to be easy enough to control despite the significant recoil from the heavy loads. Obviously that would change if an angry sow was charging at me. But I’d like to think I could shoot them well enough to hit a moving target at danger close distances.

The impressive power of the Super Redhawks wasn’t the only thing that stood out when shooting them. Both models felt fantastic in the hand, the soft rubber Hogue grips made them very comfortable to shoot. The quality of the operation also struck me, smooth controls and very clean breaking triggers added to the superior feeling of these pistols.

Shop all Ruger revolvers here

The adjustable sights of the Alaskan aren’t exactly huge, they come across as pretty simple and no nonsense. That said I found them to be more than adequate for the purposes of relatively close shooting. That is to say anything inside of fifty-yards or so that rivaled the size of a paper plate was bound to be perforated with a big hole.

Ammunition for this article was supplied by **Gun Mag Warehouse**

Pros and Cons

Pros

I have always been a fan of Ruger’s revolvers, so it should come as no surprise that I found a great many things I like about the Super Redhawk Alaskan. First of all, it’s just a plain handsome design. It has all the classic and sexy features of the hero’s gun from the old westerns we watched as kids. And yet it has just enough modern flair to make it appealing as a modern firearm as well.
The simplicity of the Alaskan’s design also makes it very quick to put into service. It’s double-action design makes it ideal for a gun that needs to be jerked from the holster and immediately fired at inbound danger. The reliable operating system rolls the next chamber full of wrath right into position to deal one blow after another of heavy hitting power.
A quality finish of the pistol also makes it built to last. The Alaskan is built from stainless steel to protect it from the rough weather you’d be sure to encounter up north. Features like the clean breaking trigger, triple locked cylinder, and modern transfer bar allow the gun to serve its power with finesse, precision and safety.

Cons

I had a really hard time coming up with cons for this pistol. It has a fairly specific purpose and it serves that purpose extremely well in my opinion. Perhaps it wouldn’t be ideal for day to day carrying in places where dangerous predators over five-hundred pounds aren’t expected. It might be a bit heavy for a purpose like that. Though I won’t deny having conceal carried one of the Redhawks on multiple occasions.
There is the obvious downside of having to feed these large and expensive cartridges to such a large pistol. But if you truly need a pistol like this I’d wager you are willing to pay quite a randsome to ensure it has plenty of ammo.

Continue reading here…

Conclusion

I have really enjoyed shooting the Ruger Super Redhawk Alaskan pistols. Despite the impressive power, they are still very fun pistols to shoot and can serve you well as a defensive firearm. Perhaps the most important aspect of the pistol is that it is pleasant enough to shoot that you won’t be afraid of it if the time ever comes that you need to use it. Having enjoyed shooting the pistol as much as I have, I think it wouldn’t be hard to gain a level of proficiency suitable for shooting it well under pressure.

If you need a defensive sidearm for dangerous animals, or if you just find yourself enchanted by the big bore of the Super Redhawks, this is a great option to buy.

-CBM

Century Arms WASR 10: an AK-47 for the streets…

December 14, 2022Product review, Shooting hardware, Uncategorized7.62x39, ak-47, Kalashnikov, wasr 10coldboremiracle

The Kalashnikov

century Arms WASR 10 — On the range with **American Eagle ammunition**

Few firearms are more recognizable than the Kalashnikov family; in this article will be looking at a descendant of that family, the WASR 10. It is a Romanian-made AK-47 imported by Century Arms for the American market.
The formidable AK-47 design is the blueprint for the WASR 10; Century Arms manufactures them from Romanian parts kits. The post-Warsaw Pact production of rifles in Romania created a vast number of highly sought-after imports that are still coming into the US distribution circuit.

The WASR 10

Much like its Kalashnikov cousin, the WASR 10 uses an extremely simple and robust construction. The receiver is made from stamped steel, folded neatly into the proper shape, and fitted with the barrel and trunnion. The bolt carrier and piston assembly ride on two rails fit into the receiver, with a captured operating spring assembly fit into the rear of the bolt carrier and secured into a blind slot at the rear of the receiver. The gas tube is secured between the gas block and the trunnion with a cam pin.

straight outta Moscow

The barrel is chambered in the 7.62×39 Soviet cartridge, the hitherto low cost and proliferate supply of this ammunition is also an attractive aspect of the rifle.
Wooden furniture is used in both the foregrip area and buttstock, though the pistol grip is a polymer blend. To be honest, the whole thing gives the feeling of an infantry weapon in post cold war Soviet states, which makes a lot of sense…

The finish is almost non-existent, particularly on the wood, and you can tell that the original manufacture of these guns wasn’t exactly focused on luxurious looks. I’ve seen a great many of these types of rifles, and there is quite a variation in the grading of quality, at least from an aesthetic perspective.

What makes them special?

All that aside, these AK rifles and their extended family are famous for being incredibly reliable, like a lead pump that knows no defeat. All over the world, they can be found in terrible conditions and disrepair yet still functioning.

The availability, low cost, and that incredibly seasoned service record make these rifles very popular and favorable to American gun owners. For all the pitiful parlance I’ve mentioned regarding the WASR 10 so far, this is the part I love the most about gun reviews. The WASR 10 is exactly what I expected it to be, a lightweight, fast-moving mag siphon.

And just like every other similar AK variant I have shot, this one is an absolute blast to shoot. Low recoil, easily aimed, and way too easy to use up all your ammunition.

Shooting the Century Arms WASR 10

Ready to make slightly less noise

The 16.5-inch barrel makes the overall length of the gun quite short and easy to maneuver. The iron sights are straight out of Moscow with no frills, just the traditional adjustable ramp sight hilariously incremented out to a thousand meters. That said, while I have always found it relatively easy to get hits on target with these sights, I really wish I had an optics mount to try using a small scope on the rifle.

Reloads are not as simple as AR-type rifles; perhaps the only flaw in Mikhail’s design was the lack of a lock-back mag catch. This requires you to remove the magazine and insert the new one, followed by drawing back the bolt to chamber the first round of the new magazine. It’s not a huge deal to me, and if you look on Instagram you can see a whole bunch of tier-zero dudes running the drill faster than I can spill my coffee.

The magazines themselves are another great part of the design. Seated properly in the rifle, they feel almost like a solid piece of the receiver; you can hold the gun by the mag and shake it violently with no concern for failures of any kind. The WASR 10 now comes with polymer magazines, nothing wrong with that, but I do prefer the old steel stamped ones that I used to be able to buy for $7.00 each back in the 90s. Continue Reading Here…

WASR-10 Pros And Cons

Reliability – Unbeatable reliability with zero malfunctions.
Compatibility – Aftermarket accessories fit without issue.
Fun – I mean, c’mon, it’s an AK.
Maneuverable – Lightweight and easily manipulated.

Inaccurate – Not a particularly accurate platform.
No bolt lock-back – This in my view is a design failure.
Wood finish- Roll the dice, see what you get.
Controls- Could use some modernization.

Either way, you probably ought to get a bunch of ammo if you purchase one of these rifles, as they are just too fun to shoot. For the most part, I run the lacquered steel case ammo through my rifle. Some say it’s not optimal, but…you do you.

Ammunition Selection

Both the 122-grain FMJ and the 122 hollow point ammunition I fired through the gun functioned flawlessly. And the accuracy of both loads was very comparable. The platform isn’t known for its accuracy, so I wasn’t surprised to see groups averaging in the 2-3 MOA. I am quite confident I could shoot it much better with a good scope adequately mounted. But I would be surprised if it shot much better than 2 MOA. Additionally I shot some American Eagle 124-grain FMJ ammunition with great results.

After another afternoon of shooting, I was just as happy as ever with this rifle. It is comfortable and a joy to shoot; its lightweight and easy handling make it a walk in the park. You can definitely feel the Soviet roots from this rifle. This is not a Gucci AR.

But it still feels like a fantastic shooting tool, despite not having many of the newer style controls we have become so used to. Some nostalgia perhaps influences my feelings for the gun. The slow cyclic motion of the bolt feels like something from an old ’80s action film.

Happily, I happened to have a thread adaptor from 14X1 LH to a standard ⅝-24 which allows the use of muzzle devices with a more common thread pitch. That made it possible to install my Yankee Hill Machine R9 suppressor and a Lantac Dragon muzzle brake. Both worked great on the rifle using that adaptor.

Without an adjustable gas system, the AK family can be slightly finicky with suppressors. But this configuration worked out pretty well.

Conclusion

The AK design is a very hard one to beat, and the WASR 10 variant seems like a perfectly useful version of the venerable design. Its reliable, and fairly inexpensive compared to some other options. And it still brings that famous AK-47 looks with it as well. Get yourself a WASR 10, its an AK for the streets.

-CBM

CMMG Dissent 5.56 Pistol

December 1, 2022pistols, Product review, Shooting hardwarecoldboremiracle

Introduction

I recently wrote a review of the CMMG Banshee, and I was very impressed with nearly everything about it. So I decided I wanted to try another gun from CMMG, and reached out to see if I could get my hands on one of the CMMG Dissent 5.56 pistols. After some waiting, I was happy to see the little CMMG box show up at my desk.

The CMMG Dissent

The Dissent is not your typical AR-15 type pistol, it utilizes CMMG’s buffer-less compact action. This means that it doesn’t need the bulky buffer tube that comes standard with most AR-15 patterned rifles. The compact action instead utilizes a dual spring pack that runs right above the bolt carrier itself, it carries in between the spring set a rubberized stop if the carrier should reach a full stroke to the rear. The two uneven spring guide-rods are keyed into a steel boss at the back of the upper receiver, but remain independent of the receiver itself. The front of the two springs are captured in a T-shaped housing that appears to be part of the bolt carrier itself.
From there the Dissent is almost the same as a standard AR, using what appears to be a standard bolt, cam pin and firing pin parts. I say almost because there are a few other differences.

Because the spring assembly sits where the charging handle would normally be, they had to move the charging system to the front of the action instead. There is a steel charging block that rides in a groove inside the handguard at twelve o’clock, the charging handle itself slides in from the side of the handguard and rides in its own grove from there. A claw is attached to the front of the charging handle to keep it from reciprocating, and as far as I can tell it is reversible to either side of the handguard but requiring you to purchase a right-sided charging handle. The charging block only pushes on the bolt carrier when pulled to the rear, but remains captured during the cycling of the bolt carrier.
The Dissent is available in 5.56, 300blk, and 5.7.

Initial impressions

As I pulled the gun from its packaging I have to say I was impressed. The Dissent came to me in a handsome charcoal green Cerakote sporting CMMG’s muzzle device and a pair of Pmags. The buffer tube hole at the back of the lower receiver had been covered by a vertical pic rail, to allow for a brace or stock installation should you choose to be infringed upon by the NFA.
The Dissent comes standard with a Trigger Tech AR-D two stage trigger which was crisp as the air on a December morning. I found myself triggering the gun over and over in anticipation of shooting it. Fairly standard controls, with a 45 degree safety and ambidextrous mag release buttons. I found the left side mag button to be a little close to the bolt release for my taste, it seemed like it might be too easy to drop the mag when your trying to drop the bolt. But we’ll see about that at the range.

SPECIFICATIONS

Caliber	5.56
Capacity	30 round P-Mag
Weight	4.8 lbs
Length	14.7 inches
Barrel Twist	1:7
Barrel Length	6.5 inches
Operating System	Compact Action Direct impingement
Muzzle Threads	½ x 28
Trigger	Trigger Tech AR-D

PROS & CONS

PROS

No buffer tube required
Picatinny rail for easy stock or arm brace installation
High quality upper and lower with flawless union
Fantastic Trigger Tech trigger from the factory
Very reliable functioning operating system

CONS

Must purchase separate charging handle to run on right side of firearm
Awkward shooting without a buttstock or arm brace

FIRST RANGE OUTING WITH THE DISSENT

I was excited to get the Dissent out into the open where I could shoot it. It was a beautiful winter afternoon, with temps in the teens. Not exactly a perfect day, but close to it. I did nothing to the gun as far as lubrication or anything like that. We just started loading P-mags and went to it.

My very first impression was, how am I supposed to shoot this thing? AR pistols are small enough that you can shoot them like a pistol, but it feels awkward and silly to me. So we tried several different ways of holding the gun and ended up with one hand on the pistol grip and the other on the magwell or handguard area.

I had mounted my US Optics TSR 1X red dot for a sight, and lucky for me, it was near perfectly zeroed at about fifty yards. We went through several magazines of American Eagle 55 grain ball ammunition, and the DIssent kept plugging away.

Most things inside 50 yards seemed fairly easy to hit, I’m sure it would be useful at further distances, but something was going to need to change first. It was difficult for a guy who mainly shoots precision rifles to properly steady the rifle without having a rear point to anchor to the shoulder.

This is certainly not the fault of the Dissent, just something I’m not used to. Before testing any accuracy with the gun, I wanted to get a proper brace or buttstock to shoot it right.

Even so, we had a great time shooting the little charcoal green pistol. At no time during testing did the firearm show any malfunctions or issues, and it was fun to shoot.

I decided to throw a suppressor on the gun as well, to see how it did as a host. I had my Yankee Hill Machine Turbo 556 suppressor handy and spun it on after removing the CMMG muzzle device.

The Dissent doesn’t have an adjustable gas block, but it didn’t seem to matter. It kept banging along, suppressed, which was obviously more pleasant for the user. Slightly more noticeable gas was felt for the shooter, but not something I would be too concerned about.

RELIABILITY

The Dissent showed no malfunctions during my testing. It was using P-mags, metal GI mags, and an assortment of ammunition. Besides the American Eagle 55 grain ammo, we also shot some Frontier 55 grain hollow point ammunition and a handful of others that had collected in the bottom of my range bucket.

The seven-twist barrel of the dissent also had no trouble shooting some 75-grain loads that worked without problems.

ACCURACY

The short stiff barrel of the Dissent worked great for keeping shots consistent. Once a brace was added, I found it was easy to keep groups under 2 MOA at one hundred yards.

As the Dissent is more configured as a personal defense weapon (PDW) or something of a short sporting arm, I found this level of accuracy to be perfectly acceptable.

OVERALL FEEL

The Dissent definitely feels like a quality-made firearm, as with other CMMG firearms I have shot before this one. The fit and finish are top-notch, as are the CMMG furniture and accessories that come with it.

Everything from the Cerakote finish to the engraving looks very well done and justifies the rifle’s price point.

THE BUFFERLESS OPERATING SYSTEM

The best feature of the Dissent is its bufferless operating system. It utilizes two springs and guide-rods that are housed above the bolt carrier in the upper receiver. They are captured at the rear with an aluminum block and pass through a T-shaped boss on top of the bolt carrier.

This design allows the Dissent to be more compact than its buffered competitors.

FORWARD CHARGING HANDLE

The charging handle for the Dissent is mounted in the handguard in front of the upper receiver. There is a steel charging block that slides in its own keyed slot of the handguard, and the charging handle slides in from the side. The whole assembly can be drawn to the rear by the left hand to operate the action.

The charging block isn’t attached to the bolt carrier itself. It simply pushes back on the front of the carrier. This makes the charging handle non-reciprocating, for which the engineers at CMMG added a claw capture to the front of the charging handle to keep it in place.

The forward charging handle makes a lot of sense for a gun like this; having the traditional top-rear of the upper receiver charging handle would be very awkward.

The only downside I can see is that the charging handle isn’t reversible, it can be switched to the right side of the gun, but that requires purchasing an additional right-side charging handle.

STOCK/BRACE PIC RAIL MOUNT

Since the Dissent has no buffer tube, CMMG has installed a vertical pic rail in place of the buffer tube to add either a sling mount, arm brace, or a stock.

I tried mounting an arm brace from a Sig MCX Rattler that I had, but it wouldn’t slide over the Picatinny rail section. The only option I found worked was one clamped over the pic rail.

TRIGGER

The Trigger Tech AR-D trigger was a fantastic addition to the Dissent. It had a very clean pull and crisp break. The reset felt slightly different than I expected, but I wasn’t sure if that was by design or simply my lack of familiarity with it. Regardless, it is a fantastic component of the gun.

BACK TO THE RANGE

After installing an arm brace, I wanted to further test the Dissent and see how much better I could do. Additional accuracy testing proved the rifle to be very capable of 1-2 MOA depending on ammunition type. And I felt much more comfortable with the gun, shooting it as a rifle vs. a pistol.

The very short Dissent is extremely agile when moving through a course of fire. The short length makes the rifle quick to get on target and easy to maneuver. In my opinion, the addition of a suppressor is almost a requirement, as the gun is so short that one can easily get the support hand into the extremely dangerous muzzle area. Adding a suppressor greatly reduces the likelihood of your fingers’ proximity to gas and bullets being expelled from the muzzle.

I found myself really appreciating the enlarged magazine release buttons on the Dissent. They did make it easy to perform reloads quickly. The bolt release did end up being a touch obscured for my taste. After reloading, it took a little bit more attention than normal to ensure the bolt release was depressed acutely.

I was again impressed with the trigger, as I always have been with Trigger Tech products. It made a significant improvement, in my opinion, in my ability to accurately shoot the Dissent.

Continue Reading here…

AMMO USED

The Majority of ammunition used for this review was American Eagle 55 grain ball ammo. There was a significant amount of the Frontier 55 HP and PMC X Tac ammunition. But from what I witnessed with the Dissent, I would feel confident shooting most any ammunition.

CONCLUSION

I’ve said it already, the CMMG Dissent is a great option if you are looking to SBR or quasi-SBR an AR-15 type rifle. If you enjoy shooting AR pistols then I figure you can certainly do that with this one too. The gun works perfectly either way, and it is compatible with all the best options for either direction.

For me it is an excellent option with flawless function and a well executed design. CMMG has obviously put a lot of thought into their design, and added quality accessories to go along with it. Little things like their 60/90 degree safety that allow you to adjust the throw to your liking bring great value to the Dissent and other CMMG products as well.

If you are in the market for an AR pistol, do NOT overlook the Dissent, or at minimum look at it and the other pistol offerings from CMMG as they are hard to pass up.

-CBM

A Solid Season: hunting with Cayuga solid Bullets

November 25, 2022hunting, Product review, Shooting hardwarecayuga, copper, hunting bullets, Patriot Valley Arms, pva, solid, solid bulletscoldboremiracle

You may have seen me talk about Cayuga solid copper hunting bullets before, but today we are going to go in a little deeper into these very high quality bullets from Patriot Valley Arms. I have always been a match bullet shooter, for targets or game. I suppose I didn’t know what I was missing out on with these solid match-grade projectiles.

What’s so Special about solid bullets?

If you’ve never looked into these or any other solid bullets, let me explain why they perform so well.
Cayuga’s are turned on a CNC Lathe from a solid bar of copper, this precise fabrication allows consistency and concentricity to be perfectly matched from one bullet to the next. So for one they are more consistent than jacketed bullets, even the open-tips are perfectly uniform. But there is still more to it. Solid copper bullets are lighter than jacketed bullets of comparable size, for example the 7mm 170 Cayuga is about the same size as a 7mm 195 jacketed bullet. The design of the Cayuga gives it a superior Ballistic Coefficient, (A mathematical score of the bullets efficiency in flight) This high BC gives the Cayuga it’s better than average flight characteristics for long-range shooting. The efficiencies of the BC also allow the bullet to cheat some of the effects of wind, high BC bullets like the Cayuga are affected less by wind as they fly through it on their way to the target.

An average 5-shot group. Accuracy comes standard with these bullets.

But there is still more:
The lighter weight of the Cayuga bullets when compared to jacketed bullets means that they can be shot even faster. So not only are they more consistent, and high BC, but by increasing the muzzle velocity you can further increase the energy they carry and the range to which they are effective. And higher speed means they will arrive at the target faster, giving the wind less time to affect their flight path.

The owner of PVA and I have been talking for years about everything from terminal ballistics to airplanes, Josh is a bit of a mad scientist crossed with a pitbull who doesn’t let go.

A couple years back, he sent me some of his first Cayuga solid bullets, they were the 122 grain 6.5 Cayugas. We used them to take down a pair of cow elk from 475 and 520 yards from a 24″ 6.5 Creedmoor, both of them dropped in their tracks never to move again. Watch the video here

Last year, I tried the 6mm flavor of Cayuga bullets, they came in at 100 grains. We again used them to take down a couple small mule deer bucks, though taking them down from 680 and 1000 yards is no small feat for a little 6mm. Both bucks went straight down, and never got back up. The Cayuga’s fired from my 24″ 6MM GT were extremely accurate and very impressive.

This year, I wanted to get even more data on the Cayuga’s as a hunting bullet. We had plenty of ballistic data on how they fly and such, but more terminal data was needed to better illustrate the benefits of these bullets as a hunting projectile. So we loaded them up in a few different calibers to see just how many animals we could kill with the Cayuga.
First up was my son Leo’s antelope hunt. Since the GT performed so well last year, I thought we’d give it another chance. And 6mm’s are great for antelope hunts on the open prairie.
You can read the whole story here, but the salient facts are these; We took two mature doe pronghorn antelope from six hundred-ish yards, and the 100 grain Cayuga did an excellent job of dispatching the animals.

One reason I like using cartridges a little lighter than most, is because I hate loosing meat to bullet damage. The 6mm Cayugas did just the right amount of damage in my estimation, enough to kill the animal clean but not take too much of my delicious meat with it.

The next hunt up was the general season mule deer hunt. We had the whole family hunting with Cayugas solids this season, in 6mm, 6.5, 260 rem, 270 wsm, 7SAUM, and 300WM. Unfortunately we weren’t able to get them all in the right place at the right time, but does it ever work out to plan?

We did manage to take a few deer with the 6.5’s and .260’s though. The first 6.5 shot was on a small buck from a distance of approximately 175 yards, the shot placement wasn’t as good as I would have hoped and he made it about forty yards before laying down to die.
The second one fell to the same 122 grain Cayuga fired from a 16″ .260 Remington owned by my son. He made a quick shot on an escaping buck to drop him right in his tracks, the shot passed through the shoulder, disconnected the coronary plumbing and sailed through the other side. The distance of this shot was three hundred and thirty yards.

My other son put the moves on a small spike using the 6.5 Creedmoor and 122 Cayuga. This little buck was around 300 yards away when he took a Cayuga through his liver. He made it a little farther than I would have liked, but better shot placement is the only fix for that.

The last deer we shot was with the same 6.5 Creedmoor, this time it was my wife’s buck. He thought he had given us the slip, but he didn’t know we were waiting quietly for him to step out.
When he did, we were ready with another 122 grain Cayuga. The shot was just over two hundred yards, and it hit him like a copper train. He jumped a couple times into the brush stumbling around until his feet were in the air.

The Cayuga absolutely wrecked his heart, I’m always surprised to see an animal move at all after an impact like this.

The season wasn’t over just yet, I still had a cow elk tag to get before the end of the year. In the last few days of the season, we were able to close in on a couple cows. And being so short on time I wasn’t going to be picky when the opportunity was presented.
I carried with me that day my SRS M2 again, this time using the 7 SAUM barrel I’ve had for years. In the magazine were handloaded 151 grain Cayugas with a modest muzzle velocity of 3100FPS. I’d shot them with very predictable accuracy beyond one-thousand yards, so I was prepared for about anything.

A young cow elk taken with the 151 Cayuga

As it turns out, the shot presented was only 250 yards away. The elk was quartering away but looking back, the shot impacted the right shoulder passing through both lungs and exited just in front of the left shoulder. She ran a short distance before expiring but the damage of the impact was very apparent as we butchered the animal. I would consider the minimal meat damage to be better than average, which I also consider a big plus.

As I had anticipated, it has been a season full of bounty. From the very first time I killed an animal with a Cayuga, I had a good feeling that these were essentially bottled-lightning. And after this successful season, I can again confirm that the flight-performance and terminal performance of the Cayuga is outstanding. If you are looking for something to enhance your hunting performance, give them a try.

-CBM

2023 update

During the fall of 2023 I again used the 100 grain Cayuga on a hunt for a Pronghorn Antelope buck. I was able to take a fine buck from 480 yards, he fell to a single 6mm Cayuga that impacted through his shoulder, passed through both the heart and one lung and liver before hanging up in the off side skin just in front of his hip.

2024 Update

This season I used the 129 Cayuga solids loaded in my 6.5 PRC rifle. They shot very accurately, and were incredibly flat shooting. We managed to take a couple mule deer bucks with this combo a few days ago. The two bucks were standing together around 500 yards away, I took a shot on one of the two, and after he dropped a friend slid behind the rifle and shot the other. The first deer dropped to the ground only to kick and roll, the second made it a hop or two before keeling over.

mule deer, Patriot Valley Arms Modus rifle, 6.5 PRC, US Optics TXH 3-18x50 — The first buck shot by your’s truly

mule deer, PVA Modus rifle, 6.5PRC, us optics txh 3-18x50 — The second buck shot

I managed to get a picture of the damage done by the Cayuga after passing through my deer. An impressive wound channel for sure, and for the first time ever I found a couple curled up pieces of copper while skinning. It appears that the bullet deformed too some degree.

mule deer, wound, 129 Cayuga bullet — The offside exit wound of the 129 Cayuga

cayuga solid bullets — a recovered piece of copper from the bullet

Additionally, using the same rifle and ammo combo, I managed to take this handsome coyote while I was elk hunting this season. It was a relatively short shot, and the 6.5 PRC velocities made the death instant. Very little damage was done, the bullet probably didn’t have time to do anything.

Beretta A400 Xtreme Plus 12 Gauge

November 22, 2022Product review, Shooting hardware12 gauge, A400, Berettacoldboremiracle

Introduction

It’s hard to imagine an autoloading shotgun without thinking of one of the popular models from Beretta, like the A400 Xtreme Plus, which we will review today. The Italian company has been in the business as long as anybody. Sure there is something about a name, but there has to be more than that for dedicated shooters and hunters to pick a shotgun from the rack.

I often mention that my father is more of a shotgun nerd than I am, so I frequently look to his guidance regarding such topics. Several of the many high-end shotguns he enjoys shooting come from Beretta. For me, shotguns are a bit more utilitarian than anything, more of a hunting tool than the expensive rifle toys I play with more often. And hunting waterfowl has been one of my favorite hunts since I first started hunting.

Enter the Beretta A400 Xtreme Plus, a gas-operated 12 gauge shotgun with a 28-inch barrel and 3.5-inch chamber, one of the better all-weather hunting shotguns available. But just how good is it? And why would I choose it over something else? We’ll get to that in a moment, but I can tell you that the Xtreme is reliable, robust, and durable enough for whatever your hunt may have waiting.

Reliability

The A400 is one of Beretta’s leading hunting model shotguns, so reliability is an absolute must. During the course of the 350-400 shells I’ve fired through the gun, I’ve yet to have any issues with it.

We get some pretty crummy weather around here this time of year, but the Xtreme just keeps pumping shells and steel. Rain, sleet, and snow don’t phase this shotgun. A dunk in muddy water is never good for a gun, but this one quickly recovered from the dreaded dunk.

Accuracy

The various chokes that come with the Xtreme give you the option to customize the patterns it shoots. I found the Xtreme very easy to be effective on birds. The right choke and lead would nearly always result in a puff of feathers. I suppose there isn’t a turkey out there that wouldn’t fall to the Xtreme’s tight full pattern.

Shop Beretta shotguns, fill the hole in your safe

Overall Feel

Like most Beretta shotguns, this one feels like a perfect fit when it’s against your shoulder. The Kick-Off stock absorbs much of the recoil, which allows for tight cheek welds and follow-up shots.

The quality finish of the gun looks as handsome as it operates and protects it from vicious elements like salt water. Shooting with gloves is easy, and the controls are the right size and allow easy manipulation. Continue reading here

FEATURES

20 MM EXTENDED CHOKE SYSTEM

Gone are the days of digging through your shooting bag for a choke wrench. The A400 uses Berettas hand-tightened extended choke tubes, allowing you not only to install them by hand but also to ensure they keep tight in the field.

The selection of chokes provided allows you to customize your shot pattern to whatever the conditions and game you hunt require. And thanks to the toolless installation, they can easily be swapped as conditions change over your blind.

KICK-OFF STOCK

The Kick-Off stock aids in smooth operation, likely a good help for small-statured shooters. The smooth recoil allows the shooter to get several shots off in rapid succession if the target is missed or if there are multiple targets.

For shooters that aren’t good at calling their lead the first shot, this can be very valuable.

CONTROLS

Standard auto-loading controls will be familiar to anyone used to shooting autoloading shotguns.

The bolt release is oversized for easy action, and the trigger is fantastic, allowing precise shooting.

MAGAZINE

The Xtreme Plus has a standard five-round tube magazine. We had to run it with a plug to follow local laws to reduce the gun capacity to a total of three shots. But having the additional capacity is very nice if you are in a place that allows it. I’d like to get an extension for one of those spring Kansas goose hunts.

RAPID CYCLING

The Beretta system is very quick to cycle through shells. The rotating bolt allows for secure firing without sacrificing the rapid cyclic rate of the shotgun. This allows quick follow-up shots to be made on fast-flying birds.

NO BETTER TEST THAN THIS

This gun was made for plucking feathers, so I figured there was no better test than to get into a duck blind and see how it did taking down my local waterfowl. With a handful of friends, we headed out early in the morning to get into position before the shooting light arrived.

The Xtreme Plus is an excellent choice for the cold and wet winters we have here, and today would be no different. Wind and freezing rain kept the birds up and moving around for the better part of the morning.

On several occasions, we would pound an inbound group of ducks. This is where the quick-moving A400 really shows its worth. Missing the lead on a fast-moving bird is a more common occurrence than many would like to admit. But the quick follow-up of the Xtreme Plus was ready to go as soon as I saw the wad pass the bird.

The linear recoiling A400 keeps the bead of the gun in line with your target, so not only is the gun ready to shoot again quickly, but it’s also still pointed at the target.

We pumped through a bunch of shells and limited out on ducks. One day wasn’t enough, so we had to go back, and of course, the Xtreme was ready to go for round two. The cold weather was no match for this shotgun’s performance, and we once again pulled a limit of ducks out of the marsh.

AMMO USED

I rarely use anything other than 2-¾ shells when duck hunting, but I often carry a handful of 3 or 3.5 inch magnum loads in case a flock of geese was to fly over. The A400’s 3.5 chamber easily handles the heavier goose and swan loads that I carry for these less frequent events. During testing, I found the gun cycled with zero issues.

When using the A400 Xtreme Plus, I prefer Black cloud, Fiocchi, and Winchester

CONCLUSION

The Beretta A400 Xtreme Plus is everything a hunting shotgun should be, it just feels right in my hands, and I feel unstoppable when the birds flare. The simple design and robust construction of the A400 are the sources of its incredible reliability, rapid cyclic rate, and ability to stay on target for more shooting.

It isn’t just a performer; it’s also a beauty. The camo coatings make the gun fit right into our duck blind, and it just plain looks good.

Hunting with the Xtreme is a joy, and after hunting with it for some time now, I just can’t imagine anything about it I would improve.

.-CBM

If you like this review, check out the rest of our firearm reviews

IWI Tavor X95 5.56 Bullpup

November 5, 2022Product review, Shooting hardware5.56, bullpup, IWI, tavor, x95coldboremiracle

Introduction

Your first reaction to the IWI Tavor X95 might be wrinkling your nose and wincing at the word bullpup. After all, the short and stubby design is not as common in America and is typically frowned upon by many.

But those that look down their nose at these rifles do so at their own loss, as there are many benefits and even superior features to some bullpup designs.

Today we will look at one of the flagship rifles from the Israeli arms giant IWI, the Tavor X95 bullpup. Like all bullpups, the X95’s breech and firing mechanisms are behind the trigger. This shortens the overall size of the weapon by utilizing the space in the butt of the firearm that is normally vacant.

The X95

I’m no stranger to bullpups, so prepare yourself for some perspective as we go over this very popular and robust little rifle.

The first trip to the range with the X95 included a hundred or so rounds. I’d brought a few magazines to run through the rifle of various types. I had only installed a red dot as a sighting device with plans to shoot with a riflescope at a later date.

After loading a few magazines and a quick preflight inspection of the rifle, it was time to go hot. Charging the rifle is a very familiar process, seating the magazine and running the charging handle to chamber a cartridge. The safety selector is easily operated with the thumb, making the rifle ready to fire.

I fired a few magazines through the rifle, adjusting my sight a few times for a better point of impact. My initial impressions of the rifle were better than expected. The rifle shot smoothly and reliably. The trigger was a bit mushy for my taste, something common with some bullpups. But I could still shoot properly and get hits where I wanted them.

Reloading the rifle is different than a typical modern sporting rifle. Stabbing the magazine into the rear of the rifle can take some getting used to if you are new to bullpups. The bolt release is centrally located behind the magwell, allowing you to actuate it with your thumb upon seating the magazine. I would have liked to see a more flared magwell, but it could have just been my familiarity with this particular model.

The controls and ergonomics of the rifle seemed to fit me well. The charging handle does have a claw to capture it under recoil. I would have liked a slightly different configuration that offered just a smidge more purchase but again, this is just my preference.

One thing I did find a little annoying was during a reload motion; my trigger finger would often migrate behind the trigger. This made for an awkward transition back to shooting, but again it is likely just a lack of practice with the rifle that could be overcome with some training. Continue reading here

ACCURACY

Once my sight was zeroed, I found it easy to hit my targets inside one-hundred yards. But this is by no means a precision shooting rifle, as I confirmed in later range trips using a better scope. Using fifty-five-grain ball ammunition, the best groups I could produce with the rifle hovered around 2.5 MOA. I suppose you could tighten that up a bit with match-grade ammo, and perhaps the upgraded trigger might also help.

ERGONOMICS AND FUNCTION

The overall feel of the rifle was not bad, though the significant amount of polymer on the rifle does give it a bit of a Nerf gun feel. But technology being what it is these days, polymer is making its way into everything in the firearms market, so I suppose we should just embrace it.

I did take the opportunity to shoot the rifle suppressed. For that, I used the Yankee Hill Machine Turbo T2, a baffled can that mounts to a ratcheting muzzle device. I lowered the gas setting to the lowest setting, which seemed to work just fine.

The suppressed rifle did continue to function flawlessly, though I did notice a bit more gas coming from the ejection port near my face. Perhaps a slightly lower gas setting would have been ideal, but even as the gun heated up significantly, it continued to pump through magazine after magazine.

FEATURES

PICATINNY SIGHT RAIL

The sight rail allows for a plethora of options; whether you prefer iron sights or optical sight devices, you can mount it here.

IWI Tavor X95 side view barrel grip scope — The X95 with a **US Optics TS6X riflescope**

½-28 THREADED MUZZLE

The threaded muzzle allows the user to install suppressors or other muzzle devices to enhance performance or shooting experience.

AMBIDEXTROUS EJECTION

The X95 can be configured to eject out of either side of the receiver, a significant feature if you have a left-handed shooter in your midst.

ADJUSTABLE GAS SETTINGS

This is very convenient when using a suppressor and helps the user tune the rifle’s performance.

HANDGUARD ACCESSORY PIC RAIL

Conveniently located under handguard covers at three, six, and nine o’clock, giving you a solid place to mount accessories like weapon lights or a bipod.

SLING ATTACHMENTS

The sling attachments are centrally located, which allows the weapon to be suspended at a center balance point on a single-point sling if desired. Additional options can be added to the accessory rails.

INTEGRATED SIGHTS

The built-in flip-up sights come as part of the rifle allowing for a backup option should you need it.

TESTING PARAMETERS

During the duration of our time with the gun, the majority of the ammunition fired was PMC Bronze 55 grain. I had no malfunctions that weren’t operator initiated, leading me to believe that the rifle liked this particular ammo selection. I did shoot a small amount of Speer LE 75 grain SP ammunition which also worked flawlessly.

I performed no maintenance on the rifle during the test period; only the lubrication previously applied to the internals of the rifle was present. And there were some long strings of fire shooting several thirty-round magazines one after another looking for malfunctions.

Get your own IWI bullpup, even if it makes Eugene cry a tear…

At one point, I did get filthy by disassembling the rifle to switch it to left-hand eject, just to see how it went. While not difficult, I would prefer not to do such a thing outside of a bench.

CONCLUSION

The Tavor X95 has a strong record both as a civilian defense and sporting rifle, as well as a rugged service record with military groups all over the world.

I believe it’s the most fielded modern bullpup since the SA80, and has seen hard service in all kinds of conditions. All this work has surely taught the good folks at IWI how to improve the rifle, making current revisions of the rifle some of the best.

The fact that it is a bullpup rifle can be a turnoff to many, but the X95 does share a good deal of handling properties with the prolific M4 type rifles most are familiar with. I like the rifle, but there are others I like better. But I certainly would feel comfortable fielding the X95 as a second choice.

Overall it is a great rifle. My only major deterrent is the factory trigger. This is certainly subjective, as you may find it to be just fine. There is also a fine replacement trigger available for the rifle from Geissele. If you are looking for a hardened battle rifle with a big bark but the stance of a bullpup, then the Tavor X95 is just your gun.

-CBM