Category Archives: Product review

Products and equipment

ATN BinoX 4T 2.5-25X thermal binoculars

November 29, 2022Optics, Product reviewatn, binoculars, thermal, thorcoldboremiracle

Thermal Weapon Sights

Thermal weapon sights have become extremely popular over the last decade or so, I’ve had the good fortune to play with a few of them. Today we are going to talk about a supplemental thermal device, one I think is just as useful as a weapon sight; the ATN BinoX 4T 2.5-25X thermal binoculars.
I say just as useful because whenever I find myself in the dark looking for potential animals to hunt, looking around through my riflescope is not only cumbersome but dangerous. The BinoX binoculars allow the user to safely scan the surrounding environment to identify potential targets, and it also gives you additional information that will help you make a better shot when the time comes.
The ATN Binox incorporate a rangefinder, variable power settings, video recording and image capture, and even GPS location that can be used to keep track of fellow hunters in the area. An IR illuminator is also part of the device, which allows you to illuminate targets when using in conjunction with night vision optics. It also incorporates wifi that can be paired to your ATN riflescope through the ATN Ballistic Information Exchange (BIX). Using the connection you can also stream to a paired device for additional viewing while recording the stream to the SD card inside the unit.
The ATN Binox uses an armored housing with a control pad on the top with various buttons to cycle through the menus and activate the different functions of the binoculars. At the rear of the binos you have an adjustable diopter to focus the image of the display inside. The front of the sensor lens can be rotated to focus the thermal image of the target, the right side is for the thermal sensor, the left side houses other sensors and needn’t be adjusted for image focusing.
The Center button doubles as a “Nuc” button that resets the sensitivity of the sensor based on the current field of view, as far as I can tell anyway. You can adjust the power magnification of the binoculars by using the arrows on the control pad, and the power button doubles as a rangefinder trigger when the unit is powered on.
The display inside gives you quite a bit of information, with actual readouts of both incline and cant as well as a compass bearing. You can select to use different widgets such as compass and angle displays, or if you like you can keep it simple and see just the image. There are many different settings that you can adjust to better fit your needs such as different shades for showing heat, you can select different colors or shades of black and white. There are different reticles you can use for measuring targets and distances and such, and of course you can change the units from yards to meters and MOA to MRAD if you like.

Curious already? Check for you new thermal optic here.

The Binox come with an extended life battery, which I was happy to hear. Most thermal devices I have used in the past burn through batteries far too fast. There was also a neck band to carry the BinoX with, it was also easy to adjust the two ocular lenses to fit your particular eye width.

Into the darkness

After confirming a bunch of settings around the yard and making my dog uncomfortable with shouting commands into the dark corners of the yard, I decided it was time to take the BinoX into the hills and see what I could find. It took a few minutes to find a contrast setting that I preferred, but I settled on the “Glowbow” setting. As you’ll see from my pictures I neglected to set the time and date.

a deer as seen at around 20X magnification from approximately 250 yards

Once I got into the mountains I began scanning where I figured I would be able to find a deer or two, or perhaps even a unsuspecting hiker. I did find something that quickly became frustrating. There were plenty of rocks in the hills that appeared to retain a bunch of heat, this inevitably gave me too many false ID’s of potential life. When I actually did see something that was clearly alive and warm, it was pretty clear. But often times I would have to watch at some of the more distant targets to see if they moved before I could confirm their identity.
I spent some time getting used to the imagery through the binos, and testing out the different functions. It did take me a minute to get used to some of the controls and understand everything, but soon enough I was finding things and measuring their distance with the rangefinder and even snapping pictures and videos of them. Much like properly viewing an ultrasound image, it seems there is a bit of a learning curve with looking at images like this. Oftentimes it is easy enough to make out trees, rocks and so forth. You can even make out sunny spots and shadows in the images taken during daylight. I have seen better imagery from other thermal units, but to be fair they cost significantly more than this one.
Finding animals in complete darkness turned out be be everything I hoped it would be, it reduced the eeriness of the darkness. Thermal optics have the benefit of being useful in the daylight just as complete darkness, which is a leg up over night vision optics. I found that using the BinoX during the daytime was also helpful in finding things that were alive in a sea of ambient temperature trees and hills. Continue Reading Here…

SOME DRAWBACKS

I’ll go over the negative things first, as I’ve mentioned I have used other high-dollar units so take my opinion with a grain of salt. One of the most significant things I didn’t like with the BinoX was that things that weren’t warm showed up as if they were. This is likely technological ignorance on my part, it appears that the sensor shows differences in temperature more than anything. For example, the deer I was looking at are surely warmer than anything else on a sub-freezing mountainside with scattered snow at 6:00 AM, but even so many of the rocks on that hillside looked as if they were warm in the BinoX.

The rocks were a whole other color/shade than the ground and trees but were clearly discernible as well. I guess I was just hoping that only warm things would show up as such on the display, but to be fair I got used to it fairly quick, and it ceased to be as difficult.

The rangefinder works, and I tested its accuracy alongside another comparably priced unit. I like rangefinders that reach the two kilometers or more, but for use in the darkness it’s probably better to stay fairly close. Ranging targets inside 1,000 yards seemed to be easy with the Binox, but I didn’t care for the large opening in the ranging reticle, I think it could use a more precise aiming point.

I am not sure what the laser divergence is for the rangefinder, but perhaps the reticle size is based on the beam divergence.

I was unfortunately unable to try the Obsidian APP that I downloaded to view images from the BinoX, I wasn’t able to pair the device and the live chat support on ATN’s website was unable to help me as I wandered around in the darkness.

WHAT I LOVE ABOUT THE BINOX

Now for the good news. I was very excited to be able to see so many things in the dark that were previously unknown. These Binoculars are an awesome tool if you are trying to locate animals in the darkness, or very low light. I suppose you could even use them in the daylight to locate animals. The zoom function is pretty easy and quick to increase your ability to identify targets, and I was pleasantly surprised that resolution wasn’t lost as I zoomed them in.

I was certainly impressed by the battery life, particularly in the cold sub-freezing temperatures in the high Rocky Mountains. The unit has a standby/sleep mode to help conserve the battery, but I wanted to see how long it would last without it. On multiple occasions I would fire the unit up an hour or so before daylight, and I would use it until the deer would begin to bed down around 10-11 at night and the battery was still chuggin’ along!

The photo/video feature is very handy, it was as simple as tapping the button to get saved images of the animals I was watching. Almost too easy in fact, as on several occasions I found I had bumped the video record button and had filled my card up with videos of my feet.

The image quality was as good as I had expected it to be and it gave me an incredible feeling of dominion over the darkness before me.

CONCLUSION

Thermal imaging is definitely not for the penny pinchers out there, there are a variety of BinoX models available but the most affordable chimes in with an MSRP of $2,699. Needless to say, it can be a hard pill to swallow for most. Though you might find it extremely fun to prowl the darkness, you won’t be able to occult such a purchase from your spouse without risking your own body heat. But if you have the ability to buy products like this, then you will surely enjoy them as I have.

The ATN 640 4T BinoX will take your hunting to a whole new level, and the features make it a pleasure to use. Watch for my next article about the ATN THOR 4T HD Riflescope.

-CBM

Sig Sauer Tango MSR 1-6×24 riflescope

November 26, 2022Optics, Product reviewmsr, Optics, sig sauer, tango, tango msrcoldboremiracle

Introduction

I’ve been on an LVPO kick for a while now, I find them to be very useful for a great many purposes. Despite my focus on precision and long range shooting, LVPO’s still make up a good portion of my optics selection. Today I want to take a look at a new to me LVPO, the Sig Sauer Tango MSR 1-6×24 riflescope

Having had a couple different experiences with Sig Sauer Optics starting with the Tango series of scopes as well as another LVPO the Tango 6T. I have really enjoyed these different scopes and largely I have had few problems with them. So when the opportunity to check out this Tango MSR I was very excited to get hands on it.

Buy your own Tango MSR right here!

Out of the box

As I opened the box, I was glad to see that Sig even includes a quality ALPHA-MSR scope mount in the box. That easily narrowed down my mounting decisions.
I will say I was surprised with everything included with the scope, and I’ll be honest that going in I had only a vague idea of the price of this scope. The mount, the typical tools that come with it, battery for the illuminated reticle, and some quality flip caps were also included. They are branded Sig but look to be either Tenebrex or a really close knockoff.

Either way they are very nice and lay flat against the scope when open. The MSR also includes a throw lever or “cattail” as its often called, this is handy for quick adjustments of the magnification.
Sig’s Tango MSR is a second focal plane scope, that means the reticle stays the same regardless of magnification setting. The scope adjustment turrets are MOA and have .5 MOA clicks. And the scope body has a centerline painted on the exterior of the tube, to help ensure level mounting I believe and it surely did that. In a very short time I had the scope married to it’s mount and ready to install on a rifle.

The Tango MSR was a perfect fit for the **Sig Sauer MCX**

First Shots

Luckily I happened to have a Sig Sauer MCX rifle in hand at the time, it seemed like a perfect fit for the MSR. I was more correct than I could have known.

After installing the scope onto the pic rail of the MCX, off to the range we went. The MSR seemed to be made for the MCX as I didnt even need to adjust the scope for a good zero. Once I started shooting everything lined up like they came from the factory that way.
We spent some time shooting the rifle at fairly close distances inside two-hundred yards, but I also utilized the reticle for a few extended distances. The reticle features a typical upside down horseshoe type reticle, with several drop points and wind holds. Its name suggests that the MSR is designed specifically for Modern Sporting Rifles (MSR), and the BDC6 reticle is calibrated for the most popular MSR cartridge the 5.56 Nato.

As I mentioned earlier, I purposely didn’t look at the price of this scope before reviewing it. I was previously very pleased with the optical quality of the Tango 6T. This Tango MSR is not quite as high quality, but still very clean and clear. I was surprised to see the price point after playing with it. One would have expected it to come in the 600-800 dollar range. But for the MSRP of $422.99 I think this scope is a great value.

Shop Sig Sauer Tactical optics

I also bolted down the mounted scope to a bench, and measured the turret values against the reticle values which all checked out. The reticle values are handy to keep in mind, or you can refer to the owners manual where they are listed.

It may not line up perfectly with the drop of your particular ammunition and atmosphere. This is why I typically don’t care for calibrated reticles. That said, if you know what value they represent you can use them for all kinds of shots and hold overs.

Pros & Cons

In my opinion, the Tango MSR is a great little scope for its intended purpose. Optical clarity is great, the magnification ring is quick to adjust and its throw lever helps make it even better. The 1X power setting allows for easy both eyes open aiming, without straining to focus. The quality accessories that are included also greatly add to the value of this scope. Including the mount is a perfect match for the scope as are the the scope caps.
Perhaps one thing I would change about the scope is probably the reticle. I’m not a big fan of the horseshoe type reticles. Though it does have lots of detail to allow holdovers and windage etc. Which makes it certainly a very useable reticle. I also wouldn’t mind having an MRAD version of the MSR. But to be perfectly fair it’s not the type of scope you’ll be dialing all over with so it’s probably fine.

Conclusion

The Sig Sauer Tango MSR is a great little scope. I would highly recommend it for anyone who is looking for an LVPO in this price range. It has a great deal of value added as well as performance capability.

-CBM

A Solid Season: hunting with Cayuga solid Bullets

November 25, 2022hunting, Product review, Shooting hardwarecayuga, copper, hunting bullets, Patriot Valley Arms, pva, solid, solid bulletscoldboremiracle

You may have seen me talk about Cayuga solid copper hunting bullets before, but today we are going to go in a little deeper into these very high quality bullets from Patriot Valley Arms. I have always been a match bullet shooter, for targets or game. I suppose I didn’t know what I was missing out on with these solid match-grade projectiles.

What’s so Special about solid bullets?

If you’ve never looked into these or any other solid bullets, let me explain why they perform so well.
Cayuga’s are turned on a CNC Lathe from a solid bar of copper, this precise fabrication allows consistency and concentricity to be perfectly matched from one bullet to the next. So for one they are more consistent than jacketed bullets, even the open-tips are perfectly uniform. But there is still more to it. Solid copper bullets are lighter than jacketed bullets of comparable size, for example the 7mm 170 Cayuga is about the same size as a 7mm 195 jacketed bullet. The design of the Cayuga gives it a superior Ballistic Coefficient, (A mathematical score of the bullets efficiency in flight) This high BC gives the Cayuga it’s better than average flight characteristics for long-range shooting. The efficiencies of the BC also allow the bullet to cheat some of the effects of wind, high BC bullets like the Cayuga are affected less by wind as they fly through it on their way to the target.

An average 5-shot group. Accuracy comes standard with these bullets.

But there is still more:
The lighter weight of the Cayuga bullets when compared to jacketed bullets means that they can be shot even faster. So not only are they more consistent, and high BC, but by increasing the muzzle velocity you can further increase the energy they carry and the range to which they are effective. And higher speed means they will arrive at the target faster, giving the wind less time to affect their flight path.

The owner of PVA and I have been talking for years about everything from terminal ballistics to airplanes, Josh is a bit of a mad scientist crossed with a pitbull who doesn’t let go.

A couple years back, he sent me some of his first Cayuga solid bullets, they were the 122 grain 6.5 Cayugas. We used them to take down a pair of cow elk from 475 and 520 yards from a 24″ 6.5 Creedmoor, both of them dropped in their tracks never to move again. Watch the video here

Last year, I tried the 6mm flavor of Cayuga bullets, they came in at 100 grains. We again used them to take down a couple small mule deer bucks, though taking them down from 680 and 1000 yards is no small feat for a little 6mm. Both bucks went straight down, and never got back up. The Cayuga’s fired from my 24″ 6MM GT were extremely accurate and very impressive.

This year, I wanted to get even more data on the Cayuga’s as a hunting bullet. We had plenty of ballistic data on how they fly and such, but more terminal data was needed to better illustrate the benefits of these bullets as a hunting projectile. So we loaded them up in a few different calibers to see just how many animals we could kill with the Cayuga.
First up was my son Leo’s antelope hunt. Since the GT performed so well last year, I thought we’d give it another chance. And 6mm’s are great for antelope hunts on the open prairie.
You can read the whole story here, but the salient facts are these; We took two mature doe pronghorn antelope from six hundred-ish yards, and the 100 grain Cayuga did an excellent job of dispatching the animals.

One reason I like using cartridges a little lighter than most, is because I hate loosing meat to bullet damage. The 6mm Cayugas did just the right amount of damage in my estimation, enough to kill the animal clean but not take too much of my delicious meat with it.

The next hunt up was the general season mule deer hunt. We had the whole family hunting with Cayugas solids this season, in 6mm, 6.5, 260 rem, 270 wsm, 7SAUM, and 300WM. Unfortunately we weren’t able to get them all in the right place at the right time, but does it ever work out to plan?

We did manage to take a few deer with the 6.5’s and .260’s though. The first 6.5 shot was on a small buck from a distance of approximately 175 yards, the shot placement wasn’t as good as I would have hoped and he made it about forty yards before laying down to die.
The second one fell to the same 122 grain Cayuga fired from a 16″ .260 Remington owned by my son. He made a quick shot on an escaping buck to drop him right in his tracks, the shot passed through the shoulder, disconnected the coronary plumbing and sailed through the other side. The distance of this shot was three hundred and thirty yards.

My other son put the moves on a small spike using the 6.5 Creedmoor and 122 Cayuga. This little buck was around 300 yards away when he took a Cayuga through his liver. He made it a little farther than I would have liked, but better shot placement is the only fix for that.

The last deer we shot was with the same 6.5 Creedmoor, this time it was my wife’s buck. He thought he had given us the slip, but he didn’t know we were waiting quietly for him to step out.
When he did, we were ready with another 122 grain Cayuga. The shot was just over two hundred yards, and it hit him like a copper train. He jumped a couple times into the brush stumbling around until his feet were in the air.

The Cayuga absolutely wrecked his heart, I’m always surprised to see an animal move at all after an impact like this.

The season wasn’t over just yet, I still had a cow elk tag to get before the end of the year. In the last few days of the season, we were able to close in on a couple cows. And being so short on time I wasn’t going to be picky when the opportunity was presented.
I carried with me that day my SRS M2 again, this time using the 7 SAUM barrel I’ve had for years. In the magazine were handloaded 151 grain Cayugas with a modest muzzle velocity of 3100FPS. I’d shot them with very predictable accuracy beyond one-thousand yards, so I was prepared for about anything.

A young cow elk taken with the 151 Cayuga

As it turns out, the shot presented was only 250 yards away. The elk was quartering away but looking back, the shot impacted the right shoulder passing through both lungs and exited just in front of the left shoulder. She ran a short distance before expiring but the damage of the impact was very apparent as we butchered the animal. I would consider the minimal meat damage to be better than average, which I also consider a big plus.

As I had anticipated, it has been a season full of bounty. From the very first time I killed an animal with a Cayuga, I had a good feeling that these were essentially bottled-lightning. And after this successful season, I can again confirm that the flight-performance and terminal performance of the Cayuga is outstanding. If you are looking for something to enhance your hunting performance, give them a try.

-CBM

2023 update

During the fall of 2023 I again used the 100 grain Cayuga on a hunt for a Pronghorn Antelope buck. I was able to take a fine buck from 480 yards, he fell to a single 6mm Cayuga that impacted through his shoulder, passed through both the heart and one lung and liver before hanging up in the off side skin just in front of his hip.

2024 Update

This season I used the 129 Cayuga solids loaded in my 6.5 PRC rifle. They shot very accurately, and were incredibly flat shooting. We managed to take a couple mule deer bucks with this combo a few days ago. The two bucks were standing together around 500 yards away, I took a shot on one of the two, and after he dropped a friend slid behind the rifle and shot the other. The first deer dropped to the ground only to kick and roll, the second made it a hop or two before keeling over.

mule deer, Patriot Valley Arms Modus rifle, 6.5 PRC, US Optics TXH 3-18x50 — The first buck shot by your’s truly

mule deer, PVA Modus rifle, 6.5PRC, us optics txh 3-18x50 — The second buck shot

I managed to get a picture of the damage done by the Cayuga after passing through my deer. An impressive wound channel for sure, and for the first time ever I found a couple curled up pieces of copper while skinning. It appears that the bullet deformed too some degree.

mule deer, wound, 129 Cayuga bullet — The offside exit wound of the 129 Cayuga

cayuga solid bullets — a recovered piece of copper from the bullet

Additionally, using the same rifle and ammo combo, I managed to take this handsome coyote while I was elk hunting this season. It was a relatively short shot, and the 6.5 PRC velocities made the death instant. Very little damage was done, the bullet probably didn’t have time to do anything.

Beretta A400 Xtreme Plus 12 Gauge

November 22, 2022Product review, Shooting hardware12 gauge, A400, Berettacoldboremiracle

Introduction

It’s hard to imagine an autoloading shotgun without thinking of one of the popular models from Beretta, like the A400 Xtreme Plus, which we will review today. The Italian company has been in the business as long as anybody. Sure there is something about a name, but there has to be more than that for dedicated shooters and hunters to pick a shotgun from the rack.

I often mention that my father is more of a shotgun nerd than I am, so I frequently look to his guidance regarding such topics. Several of the many high-end shotguns he enjoys shooting come from Beretta. For me, shotguns are a bit more utilitarian than anything, more of a hunting tool than the expensive rifle toys I play with more often. And hunting waterfowl has been one of my favorite hunts since I first started hunting.

Enter the Beretta A400 Xtreme Plus, a gas-operated 12 gauge shotgun with a 28-inch barrel and 3.5-inch chamber, one of the better all-weather hunting shotguns available. But just how good is it? And why would I choose it over something else? We’ll get to that in a moment, but I can tell you that the Xtreme is reliable, robust, and durable enough for whatever your hunt may have waiting.

Reliability

The A400 is one of Beretta’s leading hunting model shotguns, so reliability is an absolute must. During the course of the 350-400 shells I’ve fired through the gun, I’ve yet to have any issues with it.

We get some pretty crummy weather around here this time of year, but the Xtreme just keeps pumping shells and steel. Rain, sleet, and snow don’t phase this shotgun. A dunk in muddy water is never good for a gun, but this one quickly recovered from the dreaded dunk.

Accuracy

The various chokes that come with the Xtreme give you the option to customize the patterns it shoots. I found the Xtreme very easy to be effective on birds. The right choke and lead would nearly always result in a puff of feathers. I suppose there isn’t a turkey out there that wouldn’t fall to the Xtreme’s tight full pattern.

Shop Beretta shotguns, fill the hole in your safe

Overall Feel

Like most Beretta shotguns, this one feels like a perfect fit when it’s against your shoulder. The Kick-Off stock absorbs much of the recoil, which allows for tight cheek welds and follow-up shots.

The quality finish of the gun looks as handsome as it operates and protects it from vicious elements like salt water. Shooting with gloves is easy, and the controls are the right size and allow easy manipulation. Continue reading here

FEATURES

20 MM EXTENDED CHOKE SYSTEM

Gone are the days of digging through your shooting bag for a choke wrench. The A400 uses Berettas hand-tightened extended choke tubes, allowing you not only to install them by hand but also to ensure they keep tight in the field.

The selection of chokes provided allows you to customize your shot pattern to whatever the conditions and game you hunt require. And thanks to the toolless installation, they can easily be swapped as conditions change over your blind.

KICK-OFF STOCK

The Kick-Off stock aids in smooth operation, likely a good help for small-statured shooters. The smooth recoil allows the shooter to get several shots off in rapid succession if the target is missed or if there are multiple targets.

For shooters that aren’t good at calling their lead the first shot, this can be very valuable.

CONTROLS

Standard auto-loading controls will be familiar to anyone used to shooting autoloading shotguns.

The bolt release is oversized for easy action, and the trigger is fantastic, allowing precise shooting.

MAGAZINE

The Xtreme Plus has a standard five-round tube magazine. We had to run it with a plug to follow local laws to reduce the gun capacity to a total of three shots. But having the additional capacity is very nice if you are in a place that allows it. I’d like to get an extension for one of those spring Kansas goose hunts.

RAPID CYCLING

The Beretta system is very quick to cycle through shells. The rotating bolt allows for secure firing without sacrificing the rapid cyclic rate of the shotgun. This allows quick follow-up shots to be made on fast-flying birds.

NO BETTER TEST THAN THIS

This gun was made for plucking feathers, so I figured there was no better test than to get into a duck blind and see how it did taking down my local waterfowl. With a handful of friends, we headed out early in the morning to get into position before the shooting light arrived.

The Xtreme Plus is an excellent choice for the cold and wet winters we have here, and today would be no different. Wind and freezing rain kept the birds up and moving around for the better part of the morning.

On several occasions, we would pound an inbound group of ducks. This is where the quick-moving A400 really shows its worth. Missing the lead on a fast-moving bird is a more common occurrence than many would like to admit. But the quick follow-up of the Xtreme Plus was ready to go as soon as I saw the wad pass the bird.

The linear recoiling A400 keeps the bead of the gun in line with your target, so not only is the gun ready to shoot again quickly, but it’s also still pointed at the target.

We pumped through a bunch of shells and limited out on ducks. One day wasn’t enough, so we had to go back, and of course, the Xtreme was ready to go for round two. The cold weather was no match for this shotgun’s performance, and we once again pulled a limit of ducks out of the marsh.

AMMO USED

I rarely use anything other than 2-¾ shells when duck hunting, but I often carry a handful of 3 or 3.5 inch magnum loads in case a flock of geese was to fly over. The A400’s 3.5 chamber easily handles the heavier goose and swan loads that I carry for these less frequent events. During testing, I found the gun cycled with zero issues.

When using the A400 Xtreme Plus, I prefer Black cloud, Fiocchi, and Winchester

CONCLUSION

The Beretta A400 Xtreme Plus is everything a hunting shotgun should be, it just feels right in my hands, and I feel unstoppable when the birds flare. The simple design and robust construction of the A400 are the sources of its incredible reliability, rapid cyclic rate, and ability to stay on target for more shooting.

It isn’t just a performer; it’s also a beauty. The camo coatings make the gun fit right into our duck blind, and it just plain looks good.

Hunting with the Xtreme is a joy, and after hunting with it for some time now, I just can’t imagine anything about it I would improve.

.-CBM

If you like this review, check out the rest of our firearm reviews

IWI Tavor X95 5.56 Bullpup

November 5, 2022Product review, Shooting hardware5.56, bullpup, IWI, tavor, x95coldboremiracle

Introduction

Your first reaction to the IWI Tavor X95 might be wrinkling your nose and wincing at the word bullpup. After all, the short and stubby design is not as common in America and is typically frowned upon by many.

But those that look down their nose at these rifles do so at their own loss, as there are many benefits and even superior features to some bullpup designs.

Today we will look at one of the flagship rifles from the Israeli arms giant IWI, the Tavor X95 bullpup. Like all bullpups, the X95’s breech and firing mechanisms are behind the trigger. This shortens the overall size of the weapon by utilizing the space in the butt of the firearm that is normally vacant.

The X95

I’m no stranger to bullpups, so prepare yourself for some perspective as we go over this very popular and robust little rifle.

The first trip to the range with the X95 included a hundred or so rounds. I’d brought a few magazines to run through the rifle of various types. I had only installed a red dot as a sighting device with plans to shoot with a riflescope at a later date.

After loading a few magazines and a quick preflight inspection of the rifle, it was time to go hot. Charging the rifle is a very familiar process, seating the magazine and running the charging handle to chamber a cartridge. The safety selector is easily operated with the thumb, making the rifle ready to fire.

I fired a few magazines through the rifle, adjusting my sight a few times for a better point of impact. My initial impressions of the rifle were better than expected. The rifle shot smoothly and reliably. The trigger was a bit mushy for my taste, something common with some bullpups. But I could still shoot properly and get hits where I wanted them.

Reloading the rifle is different than a typical modern sporting rifle. Stabbing the magazine into the rear of the rifle can take some getting used to if you are new to bullpups. The bolt release is centrally located behind the magwell, allowing you to actuate it with your thumb upon seating the magazine. I would have liked to see a more flared magwell, but it could have just been my familiarity with this particular model.

The controls and ergonomics of the rifle seemed to fit me well. The charging handle does have a claw to capture it under recoil. I would have liked a slightly different configuration that offered just a smidge more purchase but again, this is just my preference.

One thing I did find a little annoying was during a reload motion; my trigger finger would often migrate behind the trigger. This made for an awkward transition back to shooting, but again it is likely just a lack of practice with the rifle that could be overcome with some training. Continue reading here

ACCURACY

Once my sight was zeroed, I found it easy to hit my targets inside one-hundred yards. But this is by no means a precision shooting rifle, as I confirmed in later range trips using a better scope. Using fifty-five-grain ball ammunition, the best groups I could produce with the rifle hovered around 2.5 MOA. I suppose you could tighten that up a bit with match-grade ammo, and perhaps the upgraded trigger might also help.

ERGONOMICS AND FUNCTION

The overall feel of the rifle was not bad, though the significant amount of polymer on the rifle does give it a bit of a Nerf gun feel. But technology being what it is these days, polymer is making its way into everything in the firearms market, so I suppose we should just embrace it.

I did take the opportunity to shoot the rifle suppressed. For that, I used the Yankee Hill Machine Turbo T2, a baffled can that mounts to a ratcheting muzzle device. I lowered the gas setting to the lowest setting, which seemed to work just fine.

The suppressed rifle did continue to function flawlessly, though I did notice a bit more gas coming from the ejection port near my face. Perhaps a slightly lower gas setting would have been ideal, but even as the gun heated up significantly, it continued to pump through magazine after magazine.

FEATURES

PICATINNY SIGHT RAIL

The sight rail allows for a plethora of options; whether you prefer iron sights or optical sight devices, you can mount it here.

IWI Tavor X95 side view barrel grip scope — The X95 with a **US Optics TS6X riflescope**

½-28 THREADED MUZZLE

The threaded muzzle allows the user to install suppressors or other muzzle devices to enhance performance or shooting experience.

AMBIDEXTROUS EJECTION

The X95 can be configured to eject out of either side of the receiver, a significant feature if you have a left-handed shooter in your midst.

ADJUSTABLE GAS SETTINGS

This is very convenient when using a suppressor and helps the user tune the rifle’s performance.

HANDGUARD ACCESSORY PIC RAIL

Conveniently located under handguard covers at three, six, and nine o’clock, giving you a solid place to mount accessories like weapon lights or a bipod.

SLING ATTACHMENTS

The sling attachments are centrally located, which allows the weapon to be suspended at a center balance point on a single-point sling if desired. Additional options can be added to the accessory rails.

INTEGRATED SIGHTS

The built-in flip-up sights come as part of the rifle allowing for a backup option should you need it.

TESTING PARAMETERS

During the duration of our time with the gun, the majority of the ammunition fired was PMC Bronze 55 grain. I had no malfunctions that weren’t operator initiated, leading me to believe that the rifle liked this particular ammo selection. I did shoot a small amount of Speer LE 75 grain SP ammunition which also worked flawlessly.

I performed no maintenance on the rifle during the test period; only the lubrication previously applied to the internals of the rifle was present. And there were some long strings of fire shooting several thirty-round magazines one after another looking for malfunctions.

Get your own IWI bullpup, even if it makes Eugene cry a tear…

At one point, I did get filthy by disassembling the rifle to switch it to left-hand eject, just to see how it went. While not difficult, I would prefer not to do such a thing outside of a bench.

CONCLUSION

The Tavor X95 has a strong record both as a civilian defense and sporting rifle, as well as a rugged service record with military groups all over the world.

I believe it’s the most fielded modern bullpup since the SA80, and has seen hard service in all kinds of conditions. All this work has surely taught the good folks at IWI how to improve the rifle, making current revisions of the rifle some of the best.

The fact that it is a bullpup rifle can be a turnoff to many, but the X95 does share a good deal of handling properties with the prolific M4 type rifles most are familiar with. I like the rifle, but there are others I like better. But I certainly would feel comfortable fielding the X95 as a second choice.

Overall it is a great rifle. My only major deterrent is the factory trigger. This is certainly subjective, as you may find it to be just fine. There is also a fine replacement trigger available for the rifle from Geissele. If you are looking for a hardened battle rifle with a big bark but the stance of a bullpup, then the Tavor X95 is just your gun.

-CBM

Colt M4 Carbine

October 11, 2022Product review, Shooting hardwarear15, colt, m4coldboremiracle

AR-15 History

The AR-15 is perhaps one of the most well known rifles in America, enough to even be known as America’s rifle. And of all the many different AR-15 configurations perhaps one of the most popular is the M4, or one of its clones. Colt has been one of the longest standing manufacturers of this type of rifle, so it feels a bit daunting to try and revisit this as a review. After all, what could I possibly have to offer that hasn’t been said a thousand times over the past twenty years?

The Colt M4 Carbine

The M4 Carbine I received for review is as familiar as Mom’s bacon and eggs on a Sunday morning. The rifle uses all of the standard features we have come to know, a mil-spec two-stage trigger, detachable Stanag pattern magazines released with the push of a button. Charging handle at twelve o’clock above the buffer tube, with a collapsible CAR type buttstock. A single sided safety operated by the thumb, and a bolt-release on the left side of the receiver.
This model came with a sixteen-inch seven twist barrel, threaded 1/2-28 at the muzzle and you guessed it; a bird-cage flash hider on the muzzle. Also included were sling attachment rings front and rear, as well as a fold down rear sight assembly to use with the gas-block mounted front sight.
This is almost exactly the rifle we have all seen in the movies and magazines since childhood, with its flattop receiver designed to take whatever kind of sight you’d like to install there. Commonly you’d see an Aimpoint, Eotech, or ACOG in this position. The only thing left to investigate was to see if it lived up to the expectation.
I prepped the Colt for a range trip, which consisted of mounting up a Trijicon MRO and some ammo to feed it.

Shop all Colt firearms here

On the Range

The M4 is configured for a fighting scenario. Or for civilians like myself lots of shooting and maneuvering at relatively close range. Surely it can be used at further distances but for the most part two-hundred yards or less are a most likely where it will be used. A red dot sight like the MRO works great for that scenario.

After sending a few test rounds, I zeroed the sight at 75 yards. Shooting for accuracy is a little easier for me to do with a riflescope, but I was able to shoot some inch and a half groups at seventy five yards. I don’t imagine it would open up too much more at one hundred yards, but it was certainly accurate enough for hitting forty-five percent IPSC targets all over the range. The XM193 ammo flowed through the rifle like a Vegas slot machine payout, and it felt just as valuable to watch it disappear.

Shooting the Colt M4 was as pleasant as you might expect. The mild recoil of the 5.56 cartridge makes shooting the rifle soft and easy to control. Muzzle rise is minimal and easily reduced by adding a different muzzle device.

The collapsible stock is easily adjusted to fit smaller statured shooters or to accommodate body armor. I’ve never envied left-handed shooters that had to operate an AR. And yet my oldest who has been given by Uncle Sam the opportunity to shoot the M4 extensively using his left-handed stance seemed to not have any issues. He even likes it to my surprise.

Accuracy

Hitting targets for both of us was great fun while using the MRO. I am definitely a scope kind of guy so using iron sights always comes with its contrasting results. It would likely serve me very well to spend more time shooting through these sights if only to improve my capabilities. The Magpul rear sight that came with this rifle was easily used through the Trijicon. I just need to up my iron game.
The M4 comes with pretty much no embellishments, a standard trigger, Magpul Pmag, single-sided safety and so on. That came as no surprise for a service-grade weapon, but I found it didn’t significantly inhibit the performance. Making shots and reloads went as smooth as I could go. And were only slowed by my skills, or lack of them anyway.

Continue Reading Here…

PROS & CONS

Colt M4 Carbine Rifle — The adjustable stock is also a classic design now, and makes the gun easy to adjust for different users or uses

What’s not to like about this rifle? It is the result of distilled revisions based on hundreds of thousands of users and decades of use both here and abroad. Any demerits or praise for the rifle or its features will likely bring out a chorus of people more experienced with the gun than myself contradicting my perspective. But I’ll do it anyway because that’s what you read this far for.

First, let me give my personal perspective. I’m more of a precision rifle kind of shooter, spoiled by good triggers and sharp-shooting rifles. So, keep that in mind and take my opinions with a grain of powder.

I felt the M4 was a bit mediocre, which may well be its purpose. The trigger was a bit “scratchy,” though not a significant issue when it comes to hitting what I aimed at. The features are also quite middle of the road: single-sided safety, mil-spec trigger, the same charging handle since 1981 (maybe), and so on. But this may all be by design and exactly what this rifle was meant to be.

Truthfully

Let’s be candid, it is an AR-15. So there isn’t a single thing about it you couldn’t change or adjust to better fit your preferences. I have heard reports of declining quality from Colt over the last decade or so. While I experienced nothing that would indicate any issues with this rifle. It is good to hear that CZ has taken the reigns over Samuel Colt’s rampant pony. Perhaps the Czech’s can improve the brand.

Overall, I enjoyed my time with this rifle. I experienced no malfunctions of any kind, and the gun plowed through everything I fed it. While not stunningly accurate, it was more than suitable for a practical fighting or sporting rifle. There are cheaper AR-15’s out there these days, so I think it may be a little overpriced when compared to its competition for some people. That may come with the name, I guess.

CONCLUSION

If you are in the market for a simple and lightweight AR, I don’t think this one would be a bad choice. The AR-15 market is incredibly broad. There is quite literally something for everyone out there. And if you are one of those die-hard Colt fanatics, then this classic AR should serve your needs well.

-CBM

Christensen Arms Ridgeline 300WSM

October 7, 2022Product review, Shooting hardware300wsm, Christensen Arms, ridgelinecoldboremiracle

Introduction

I was born and raised in the dry desert state of Utah, as such I am no stranger to the fine firearms manufacturers in this state. One of the more famous firearms companies comes from the beautiful little town of Gunnison Utah, Christensen Arms. I have known of the company for some time, but several years ago I was offered tour of their facility. Their famous carbon fiber is just part of the whole Christensen production, titanium, stainless and aerospace technology are all part of Christensen’s multi-faceted production facility. Many manufacturers, particularly those with higher price-points source their barrel blanks from well known barrel producers. Christensen cuts their own barrels, and wraps them in carbon fiber before mounting to their custom actions. They are then married them to a stock or chassis that also might be built from carbon fiber molded right there in the factory.
Things may have changed even more since my visit to the factory, but ever since then I have been wanting to try out one of these rifles. Today is finally my first chance, as I have in my possession a Christensen Ridgeline 300WSM.

christensen arms ridgeline — the Ridgeline outfitted with a **US Optics TS20X** and **Desert Tech suppressor**

The Ridgeline

The Ridgeline from Christensen is built from a stainless steel action, which shares many dimensions with the Remington 700 pattern. This allows users to utilize the large aftermarket support enjoyed by the 700 series. The action features additional cuts to reduce weight and enhance performance, and things like an enhanced bolt release make it superior to other designs. The Ridgeline comes from the factory with a Trigger Tech trigger, which are very well known for their quality and performance. The fluted bolt uses an M16 like extractor, and a plunger ejector. The threaded bolt handle comes with a petite bolt-knob which you can change out if you desire.

The carbon wrapped barrel on this rifle is chambered in the powerful 300 Winchester Short Magnum, a cartridge I am quite familiar with. The barrel is twenty-four inches long, and features a one-in-ten twist, and threaded 5/8-24 at the muzzle where you will find Christensen’s radially ported muzzle brake.
The stock for the rifle is a composite construction, which uses a pillar-bedded design to improve the accuracy and performance of the rifle. A comfortable recoil pad and sling-studs are of course standard.

In the hands

As I lifted the Ridgeline from its box, the definitive feature of these rifles was immediately evident. This thing is quite light! A rifle this size feels impressively light at under seven pounds, very desirable for a hunting rifle like this. I ran the bolt a few times, and squeezed the trigger to make sure everything looked good. And then It was time to get thing thing ready for the field.
I installed a Nightforce 30 MOA scope base, that made mounting my scope easy. I used one of my favorite scopes, and one that I frequently switch back and forth between a great many rifles. The TS20X from US Optics is an excellent choice for a long range hunting rifle like this. The 2.5X is useful for an up close encounter should you be a stealthy sneaker, and if you get a shot that is way out there, 20X is plenty for making those long shots. I mounted up the scope with a set of 34mm rings, I would have preferred a bit lower set to better fit me but these would do for now.
I also attached a Harris bipod to the front of the stock, a good bipod almost goes without saying on a long-range hunting rifle. The three-round magazine looked rather vacant without anything to fill it, so it was time to find some ammo. As I mentioned I am no stranger to the 300WSM, I’ve probably shot several thousand rounds of it over the many years I’ve spent chasing Utah’s big game, and preparing for the hunt. So I had everything on hand to make my own ammunition for the Ridgeline, but I also wanted to shoot some factory produced ammunition for those that want to know. I had on hand some Federal Fusion 300WSM loaded with 180 grain bullets, a perfect representation of what a Rocky Mountain hunter would want to use for elk or deer. Besides that I loaded up some Norma Brass with my favorite load featuring a Sierra 190 grain Match King, a load responsible for dropping a dozen or so big game animals from my first antelope at 880 yards to big cow elk at 400 yards.

Let’s Hunt

The Ridgeline is a hunting rifle, everything about it is optimized for a hard-core big game hunter. I imagine it in the frigid cold hands of a sheep hunter in the Northwest Territories, or over the shoulder of a backcountry elk hunter leading mules to a distant basecamp. I wanted to see how it would do in exactly that situation, so I took it deep into the high Rocky Mountains. After zeroing the rifle at 100 yards, I wanted to see how accurate the rifle would shoot considering Christensen rifles come with a sub-MOA accuracy guarantee. The Federal Fusion 180’s shot a sub-MOA three shot group, but when I fired two more it opened up what I would call considerably. I assume this is likely to do with the barrel heating up from the magnum cartridges and pressure.

I installed a suppressor on the rifle, in my experience most rifles seem to shoot better when suppressed. And besides that, it’s just better. The Desert Tech Sound Suppressor (DTSS) was a perfect match for the lightweight Ridgeline, its titanium construction doesn’t add much to the rifle. And it easily handles the pressure of the 300WSM reducing the noise to a reasonable raucous.
I then stretched out the rifle to some more realistic distances, this open country allows for long shots. It isn’t uncommon to find big game from a mile or two away, and stalking into a closer distance. Its also not uncommon for the terrain to keep you from getting within a certain distance, so being able to make shots at long-range is helpful.
Making hits with this rifle at five and seven hundred yards was not difficult, but I again noticed that after a few shots my hits began to wander despite the nonexistent wind. Continue Reading Here…

PROS & CONS

The Ridgeline is a very handy rifle. Its lightweight makes it comfortable to carry and easy to manipulate. The smooth stainless action pumped cartridges with only a slight hiccup. On several occasions, I had some hang-ups feeding the fat WSM cartridges. I expect this is from running them in this very short action.

Shop Christensen Arms rifles at Eurooptic

The .300 WSM is a fantastic hunting cartridge and an obvious choice for a rugged hunting rifle like this. I did feel the chamber was so short-throated as to curtail the cartridge performance some. This is likely required in order to fit the very short magazine space.

The trigger and feel of the rifle are fantastic, and the balance is much better than rifles with all-steel barreled. I’m not sure if the carbon barrel is the culprit for the wandering accuracy, but it seems like a sound analysis to me. A significant amount of shooting would seemingly be a challenge with that issue, but if you make the first shot the only one, perhaps that might not be an issue.

Pros:

Extremely lightweight and wieldy
Great accuracy on first shots
Very nice trigger out of the box
Perfect for rugged backcountry hunting

Cons:

Action had some hang-ups feeding rounds
Accuracy loosened up after a few shots

CONCLUSION

The Christensen Ridgeline was a great experience to shoot. There were plenty of things I liked about it. Of course, there were some things I would change. Depending on your hunting needs, it may be just what you need or want. The great balance and lightweight were a pleasant change from other rifles I’ve hunted with before. I only wish it was a touch more reliable when it came to hitting my point of aim during longer strings of fire.

-CBM

Howa 1500 Kratos 6.5 Creedmoor

October 4, 2022Product review, Shooting hardware1500, 6.5 creedmoor, howa, kratoscoldboremiracle

Introduction

Howa has long been a trusted brand for affordable performance. In today’s article we will be discussing another model from Howa, a variant of the model 1500. The Kratos 6.5 Creedmoor is sold as a hunting rifle and introductory precision rifle, built on the durable 1500 action and placed in a synthetic stock ready for whatever activity you choose.

The Kratos

The God of war seems a bit off for the name of a hunting or match rifle, but here we are. The features that set he Kratos apart give it some excellent handling and performance. The synthetic stock feature bedded pillars in its composite structure to keep the action firmly stabilized. The model I received came with both a hinged floorplate and a detachable box magazine system that holds five rounds. The exterior of the stock features a very nice texturing that allows excellent handling, and the whole thing is finished off with an attractive camouflaged paint pattern.
The 1500 action and barrel are also Cerakoted in a tan color, which makes the whole thing quite handsome. Controls on the action include a right side safety near the bolt-shroud, and opposite that is a petite bolt-release lever. The bolt is a ninety-degree two lug type, it uses an M16 type claw extractor and a traditional plunger ejector.
The barrel itself is a twenty-two inch eight twist barrel of a fairly light profile. Nothing wrong with that for a hunting rifle, but it did seem a little light for even an entry level match rifle. This was of little concern to me, as the only plans I had for the rifle was as a hunting tool.
The muzzle of the rifle features a very slender muzzle brake with radial ports to reduce recoil. Underneath the brake were a clean set of 1/2-28 threads, perfect for mounting a suppressor. The rifle I received also came with a one-piece scope base, which would reduce the time needed to get a scope mounted and on the range.

Range Preparation

The first thing I wanted to add to the rifle was a good scope, I had a Crimson Trace Hardline 3-12 scope handy, and already in a mount. This made installing it a breeze, leaving me needing only to zero the gun and get shooting. But before that, I installed a Harris bipod and I also grabbed my Yankee Hill Machine R9 suppressor which would make a nice addition to the ensemble.

With several hunts coming in the next few weeks, I wanted to make sure the rifle was ready for anything. Both my wife and son would also be hunting this year, and I was going to see if either of them wanted to try the new Howa as their main gun. That being the case I grabbed a couple different selections of ammunition, a Hornady 120 grain Match Load, as well as my own custom hunting load featuring the Patriot Valley arms Cayuga bullets. I’ve used these bullets many times in the past to take deer and elk, and these 122 grain bullets loaded in the 6.5 Creedmoor have dropped elk with outstanding performance.

After packing up all my gear and accessories, I took the Howa to my shooting spot. With a target hung at one hundred yards, I laid down behind the Kratos and bore-sighted the scope. I zeroed the rifle using the Hornady ammo, and also tried some 130 grain Federal Gold Medal ammunition. They all shot equally, so I tried my Cayuga hunting load as well. They averaged right at one MOA with a five shot group.

With a little refinement I figured I could tighten that up before hunting season. I would prefer the rifle shoot half MOA groups, this better consistency is very handy when shots get longer.
One thing I noticed while shooting the rifle at one hundred yards was how much I liked the two-stage trigger. You could tell it wasn’t a seven thousand dollar sniper rifle trigger, but it still was a great little trigger and better than average for a hunting rifle. I also noticed just the slightest bind on the bolt when running it, but it was also dry. I added a touch of lube to the contact points and it ran as smooth as could be.

Check out this and other Howa rifles, you’d be a fool not to.

Now that I had the rifle zeroed, I figured I would do some real world shooting. My favorite part of shooting here in the mountains is that it allows me to practice in the same scenarios that I would during a hunt. I picked out a rock about the size of a deer’s vitals, I picked it because it had the right shape, and lay surrounded by nothing but dry dirt. I ranged it with my LRF, and the range came back at four-hundred-twenty yards. It was a steep canyon and my target lay deep below me, so I dialed the elevation correction, subtracting for the incline of course. I favored into the wind which was coming down the canyon, and took up the first stage of the trigger. When my hold was just right, I pressed harder and sent the shot crushing the thin rock into the dirt.
With a fresh sense of confidence, I decided to try another shot. This one was straight across the canyon, with a good wind blowing at full-value. The laser came back with six-hundred and fifteen yards, so I again corrected my scope elevation for the distance and evaluated the wind as I lay there. A full MIL into the wind seemed a bit much, but I’ve certainly misjudged the wind before so I held the full MIL. After breaking the trigger again, I watched my bullet impact a few inches downwind of where I wanted it too. Shoulda probably held 1.1 or 1.2 MIL, but that is exactly why I like doing this, to get more experience doping the wind. Continue Reading Here…

PROS AND CONS

Having taken the Howa Kratos into the field several times now, I have been able to form an opinion worth sharing. First let’s talk about shootability, the stock feels great in the hands and its handsome to boot. I already mentioned the great trigger, and I love a good two-stage. The detachable magazine did seem a bit janky, in that I would occasionally get a failure to feed from a nose-down cartridge. The magazine itself felt pretty thin, which didn’t fill me with confidence either. I will likely just run the hinged floorplate for hunting purposes.

The muzzle brake was surprisingly petite, but it did reduce some felt recoil. Though with a Creedmoor I’m not sure if its needed. I much preferred shooting with my suppressor, additionally I don’t care for radially ported brakes due to the dirt they kick up when shooting.

There were a couple issues feeding from the magazine but that could have just been our test mag. When we swapped out to the floorplate it ran much smoother

As far as accuracy is concerned, I found it to be plenty accurate for a general-purpose hunting rifle. For an entry level match rifle, I think it could shoot better, either purpose would benefit from better accuracy in my opinion. Before hunting season starts, I will be refining my loads to see how good the little Howa can shoot.One last point is that even for an entry level match gun, the Kratos could benefit from a heavier barrel. Thinner barrels seem to wander as shot strings get longer. Hopefully for hunting, we’ll only need to shoot it once.

Pros:

Handsome rifle
Very accurate for entry level rifle
Hogue pillar bedded overmolded stock keeps action firmly stabilized
Excellent two stage trigger

Cons:

Could be more accurate, especially for a match rifle
Would benefit from heavier barrel
Some issues feeding from the magazine
Not a huge fan of radial muzzle brakes

CONCLUSION

With an MSRP of $650 I think the Kratos is a safe buy. Its handsome looks and suitable performance coming from a reputable company like Howa is likely all you need to make a choice. In my opinion this is a great little rifle, I think if my son ends up using it next month he may fall in love and have to hold onto it. And that would be just fine with me.