Tag Archives: scope

US Optics TS20X Rifle Scope

Introduction

Im a sucker for scopes, you might say I have a weak spot for them. I have used most of the very best scopes, and Ive also used many that weren’t worth straining my eye to focus through them. Part of my affliction is due to being spoiled for some time now, and I blame US Optics for it, at least partially. I have had several of them over the years, and they have earned their keep in my safe. Today I bring you another review of the US Optics TS20X rifle scope.

US Optics has a history for robust builds, with nail driving strength. They have seen many changes over the years, and we could argue surely over the pros and cons. But for me, only one thing matters, whats on-top of my rifle, and how does it perform.

The USO TS20 mounted on my Desert Tech SRS A2

The TS20X

As a riflescope addict, I was interested when US Optics launched their Tactical Sporting line of scopes, the TS Series. Like any true addict I rested not until I had the TS 20 in my hands. It was love at first sight.

My initial impression of the TS 20 was its weight, it seemed light for a USO. This new TS line was clearly a more economical series of scopes, so I expected a simpler construction. Lightweight, and a very clear and clean image were both very welcome features. The JVCR reticle was new to me, and well received. I prefer the newer “Christmas tree” style milling reticles, and I found the JVCR to be very handy to use. The offset two tenth windage holds made perfect sense when hurriedly making a wind call. And like most good reticles, even numbering to keep track of your holds. With as many as ten mils to hold over, and five wide for windage, it makes a perfect companion for todays ultra-flat shooting rifles.

Another feature that impressed me very quickly was the focus/parallax adjustment, which is adjustable down to ten yards. At first I didn’t think it was a big deal, but when I dialed the scope down to 2.5X, I realized that this scope could almost be used like a red-dot. If I ever had any up close shooting to do such as approaching a wounded animal, I could simply turn on the illumination, and mark the target with the red cross and pull the trigger. This to me seemed like a very handy feature for a scope I would surely use while hunting. And yet with the max power of 20X from the scope, there are few things I would not be able to shoot at inside my distance envelope.us optics

US Optics has always helped me put food on the table

The turrets of the TS20 are ten MIL per revolution, that for me is a minimum. Long gone are the days of five MIL per turn scopes, that was so 2010. The clicks are clean, and you can both feel and hear them as you turn the turret. The TS20 has an interesting zero-stop feature, but it requires you to limit the rotation to one turn only. Not a big deal for many things, but since I like to live on the edge, I decided to pull any stops and run it wide open. One complaint if you’ll allow it, the turret housing isn’t numbered to help you keep track of what revolution you are on. Bit of a pet peeve of mine, but not a deal breaker by any stretch. The tension of the turrets, power ring, and focus knob were all just right, not too hard to turn, but stiff enough to avoid accidental movement while packing it around.
I already mentioned the parallax/focus adjustment, but just next to it on the left side of the scope, is the rheostat to adjust the illumination on the JVCR reticle. It’s your standard 1-10 clicks with an off position in between each setting. 10 is bright enough to use as a red-dot in dim daylight, and 1 is dim enough to use with night-vision and thermals.

A downed animal, as seen at 500yds through the TS20 and thermal. Notice JVCR reticle detail

With 24 useable MILS of elevation from its 34mm tube, the TS20 is a very useful long range tool. The rifle it currently commands only needs 5MRAD of elevation to get to a thousand yards. But even if you are shooting a 308 you wont have a problem getting way out there. But with it’s super low power setting, and 28 ounce weight, it is a good option for a long-range hunting rifle as well.

The TS20 mounted on my all carbon 257 Blackjack

Shooting with the TS20X

In the field the TS20 performed exactly like every other USO I’ve ever fielded. Click values were consistent, and lined up with my known ballistic data. I keep coming back to it so forgive me, but I love the high and low range of this scope. I never thought I would want a 2X precision rifle optic, but I sure am glad I have one now. In the field was the best place to see the value.
I am not huge on high magnification, I rarely use my scopes above 20X. So the TS20 is right in the middle of where I want all my X’s. Even at max power the image is still clear, and the reticle is very useful. Even so, I usually find my power ring somewhere between 10 and 15. It is at those medium settings that I find the optical magnification and reticle proportions to be ideal, both for targeting, and making corrections.

The USO TS20 played well with everything, especially this clip-on thermal
Shop all US Optics rifle scopes

I mounted the TS20 on three different rifles, first on my Desert Tech SRS A2, and then on my MDR. Regardless of which caliber I was shooting I had every confidence that the TS would keep up. Whether it was hunting varmints on the foothills around my home, or chasing big game like mule deer or elk through these big Rocky Mountains. I’ve never had to worry about my US Optics scopes while traipsing through the brush, and no amount of bumps, drops, or bouncing around in the bed of a truck has ever knocked them out of zero. The heavy recoil from my 300 Remington Ultra Mag didn’t phase the scope, and neither did the repetitive cycling of my 450 Bushmaster chambered Desert Tech MDRX, it just kept on ticking.

This young buck couldn’t escape into the dusk, not from this combo. 450BM/MDR/TS20

Final Thoughts

The Tactical Sporting Series of scopes from US Optics looks like it has a bright future. The scopes are well made, and fit a price point that opens the door to a less expensive market than historically available to those wanting US Optics products. The premium Foundation Series remains the flagship of US Optics quality, I may need to get one of those too, but for now I will enjoy the view from this little TS20.

-CBM

Sig Sauer Tango Riflescopes

Introduction

When a company like Sig Sauer jumps into the optics market, paying attention is a must. I was more than happy to get my hands on a couple specimens early on, and I was very happy with my purchase.
The Sig Sauer Tango line of optics is marketed towards precision shooters, long-range shooters, and hunters, as well as tactical marksmen in the LE/MIL community. I’ve been exposed to quite a few good optics in that realm, so I wanted to see how Sig stacked up.

For the purpose of this article, I will be comparing two of the Tango series of riflescopes. One is the Tango 4 which is a 4-16X44, the other is a Tango 6 5-30X56. The comparison will simply be an evaluation as these scopes are peers of different levels and price points.

sig sauer tango 6
The Tango 6 seen on my Desert Tech MDRX 6.5 Creedmoor

 

Sig Sauer Tango Riflescope Features


For starters, let’s look at the features they share, then we will look at them individually.
All Tango series scopes feature Sig’s HDX coated lenses for optimal light transfer, waterproofing, Lock-Down turrets, and one free laser-etched turret that is matched to your custom load data and atmospheric conditions.
Both the T4 and T6 are Front Focal Plane (FFP) optics, which means the reticle is placed after the magnifier inside the scope. This means the reticle will grow and shrink with the magnification setting. I prefer this configuration as it makes reticle usage more uniform, regardless of the power ring setting.
Both scopes are available with the MRAD/Moa milling reticle, or the Mrad/Moa DEV-L reticle, for those that prefer one system over the other.
The T4 and T6 also have the available MOTAC™ (Motion Activated Illumination) that initiates when motion is detected and shuts off when motionless.

The differences between the two scope are probably where most people are going to make a choice. The T4 is a 4X scope, and the T6 is a 6X, the T6 allows a wider choice of magnification from 5X all the way up to 30X. The T6 also has a larger diameter tube, it’s 34MM tube allows the T6 a greater internal adjustment range. To this larger tube is owed the 12 MRAD (30 MOA) per revolution of the turret. The slightly smaller T4 has a 10 MRAD (25 MOA) of adjustment per revolution of the turret. The 4X magnification on the T4 also gives it a shorter magnification range of 4-14, depending on your application these two different ranges of adjustment could make your choice for you.

sig sauer tango 4
The Tango 4 mounted to my Tikka T3 25 Creedmoor

The T6 that I purchased, also features Sig’s Level-Plex anti-cant system. It is a digital system that uses internal sensors to tell you when the scope is level or not. When engaged (by pushing the outer end of the parallax turret) there are two small illuminated arrows visible through the reticle. You simply adjust the cant of your rifle following the indicators, and when the rifle is level the indicators go dark, showing that the rifle is level. It is a simple and very quick to use system.

On the Range

sig sauer tango 6
Turret and other control detail on the Tango 6

Shooting the Tango 4 and 6 made me like them even more. The overall clarity of both Sig Sauer Tango riflescopes was very good, and the bright images made target acquisition and spotting hits and misses a piece of cake. Whether in the bright midday sun or in the waning light of evening, I found the scopes presented more than a satisfactory image.
I did find that for shooting groups that I really appreciated the 30 power magnification of the T6, and the DEV-L reticle provided very precise measurements for both corrections and wind holds. The simpler MRAD Milling reticle in the T4 was also very useful for those who might want a reticle that isn’t so busy. And the lower magnification of the T4 made it a great option for my hunting rifle. Lighter, smaller, and easier to quickly bring onto target.
The process of zeroing the scopes, and setting the zero stop was simple, quick, and effective. In no time I had them zeroed, and was dialing them up and down for distant shots. The Level-Plex system on the T6 proved to be very handy in the field, a simple push of a button engages it, and I never had to take my eye off the target. And it turns itself off after a few minutes. I also like the locking turrets on the scopes, raising them unlocks the turret for smooth rotation, and once set, you can push them back down to lock them in place and avoid accidental adjustments.
If I had to say I didn’t like anything about the scopes, it would probably be regarding the sliding up and down of the turret. I have no basis to prove this theory other than feel, but it seems that when the turret is raised it is not as firmly supported. It feels as if you were to knock it against something hard in the up/unlocked position it could be easily broken. Again, I have no evidence to prove that, it is just a simple observation. To be fair it feels rock-solid when it is down in the locked position.
Perhaps the only other gripe I have is likely a simple defect that is easily repaired. The two fiber optic illuminators that indicate the setting on the power ring seemed to be poorly mounted on my T6. One of them came out and was lost, not a big deal, but something worth noting. I usually don’t focus too hard on the actual setting of the magnification ring anyways, I just adjust it till it looks right to my eye, and shoot.

Conclusion

I think that both of these Sig Sauer Tango riflescopes are fantastic scopes, they definitely come in at two different price points so you can pick one the one that best fits your budget. The T4 at its $719.99 MSRP is a great competitor for the sub $1000 FFP Milling reticle scope market, I think it would compete very well against any scope in that group. The larger and much more expensive T6 MSRP $3,119.99 (as tested) is in another group altogether. I would say pending a few more hard trips into the rugged mountains, and it surviving the beating therein, I would put it against any scope in the 2k to 3k dollar range. The quality is there for sure, the only concern I have yet is with durability over time, but so far I have no reason to think it won’t
clear that hurdle as well. It is quite clear that the engineers at Sig Sauer took great care in every little feature, whether it is the griping surfaces of adjustment knobs, or something as simple as aesthetic angles and accessories. And with an unlimited lifetime warranty, you can confidently put one of these scopes to work today.

-CBM

Check out more optic reviews here

Nikon Monarch 82ED-A Fieldscope

Introduction

I do a fair amount of glassing on average, not just for hunting but also for target shooting. The Rocky Mountains tower over my home to the east and the animals I hunt are tantalizingly close. I found it necessary to get a good spotting scope, a good multi-purpose scope that would suit both my hunting and target shooting needs. Is it possible for one scope to do everything? I’d like to think I found one that can.

Features

The Nikon Sport Optics Monarch Fieldscope boasts an 82MM objective lens, which gathers every detail of the landscape before it. The image is reflected through a coated prism in the aluminum body of the scope. There is a focus ring around the body that allows the user a tactile touch to finesse the image into perfect clarity. At the rear of the scope, you find the angled eyepiece, and that is where the magic happens.

The quick-release of the eyepiece allows you to use any of the available eyepieces from Nikon. There is a 20-60 power option, a 30-60 power option, or my favorite, the 30 power option with either the FX Mrad reticle or the FX MOA reticle. The same reticle I use in my riflescope is now in my spotting scope, giving me the ability to call misses and judge distances with exactness.

Having two eyepieces would be a bit superfluous, but it sure is luxurious to be able to zoom in to sixty power and inspect a nice buck. Then swap over to a thirty power eyepiece with a reticle so I can measure his spread if that’s what you want. I love the 20-60 zoom eyepiece, but my shooting style would find the reticle more useful than the extra power.
The fixed thirty power eyepiece does have a focus ring around it, this focuses the reticle against the target giving the user the best possible image to call shots, measure adjustments, as well as range targets.

The angled eyepiece is complemented by a rotating body, giving you several angle options. There is a set screw on the side that allows the scope body to rotate 360 degrees, offsetting the angle to whatever suits you. The body has a spring detent to hold the scope every 90 degrees during the rotation.
The scope also has the extendable shade around the objective. I like shades for two reasons, one is obvious, keeping direct sunlight from coming into your view while glassing. The other is to keep dirty hands and fingers away from the lenses.

The Monarch Fieldscope also came with a nice bikini-style soft cover that zips over the scope body. It also has soft plastic lens covers to protect the glass which goes on under the snap over lens covers, to double up on your protection.
It also comes with a shoulder strap should you want to carry it that way, though I think I am more comfortable carrying it in my pack. The only gripe I might have with the cover is that it limits your ability to rotate the scope body, its not much of a gripe as I feel I won’t use that feature very often.

The FX MRAD reticle is a very good companion to the Monarch Fieldscope. Some reticles can get pretty busy, leaving some observers feeling a little cluttered. The FX MRAD reticle is a perfect mix of simplicity and subtensions, it has both whole, halves, and .2’s all represented on all four posts. Whole MIL’s are only numbered on the evens to simplify, and there is even a small one MIL square in the lower right quadrant that has .1’s both vertical and horizontally.

The FX MRAD reticle as seen through the Monarch Fieldscope

In The Field

Taking the Monarch Fieldscope into the Rocky Mountains was a long-awaited venture for me. I couldn’t wait to see how my favorite varmints looked through this scope, and to see how well it would function as my main spotter.
A couple of my very good friends came along with their rifles, and we took shots from six hundred yards all the way out to fourteen hundred yards. The Monarch performed my every expectation, allowing me to see all the little details of hits, misses, and all the trace as well. I glassed across miles of canyons and shady draws, and pictures just don’t do it justice. As my friend crossed over a ridge spine some three miles away, the light was just right as I watched him stop to look at flowers, and even pick one. Clarity is absolutely top-notch with this scope, I cant wait to take it on a mature bull Elk hunt this fall.

Conclusion

I’ve used many high-end spotting scopes from most of the big names, and to be fair, I have loved every one of them. They all have a few things that I like, and a few that perhaps I would change. The Monarch Fieldscope is right up there with most all of them, the image quality is outstanding, and with it’s multiple eyepiece offerings it leaves many scopes of significantly higher price far less desireable to at least this frequent user.

I can’t imagine what it would cost to build a scope like this out of carbon fiber or something similar, but reducing the weight of it seems like one of the only things I could change to make it even better. But until they do, I will be transfixed behind this eyepiece, enjoying the view.

–CBM

Nikon Black FX 1000 4-16X50 Riflescope

What a time to be alive! Shooters have so many good options to choose from these days, the variety makes this fat kid feel like he’s in a candy shop. Today I’d like to tell you about another great product that followed me home, it wouldnt be as significant if it hadn’t kicked out a long time inhabitant of my safe.

Ive said it before, the optics game is a vigorous one, but thats good for consumers like us. With so many great companies fighting for our dollars, there is almost without question a good option for every budget and application.

I bought my first Nikon Rifle scope many years ago, it was a slightly used Buckmaster 4-14. I mounted it on my old 25-06 and used it to kill both my first deer and my first elk. I hope your sitting down, but in my humble and true opinion, Nikon has always made some great optics. There have been times where they were behind, and they may not have had the best offerings, but for the most part what they made was of good quality. For a long time, Nikon was the best I could afford, and I made do with what I had.
Thank goodness times have changed, and like the times, Nikon has stepped up their line of scopes. I was introduced to the newest Nikon tactical scopes (the Black line) a year or so ago. It was an event for writers to see some of the new products. Nikon showed up with the Black FX 1000 line of scopes, they feature a 30mm tube, first or second focal plane reticles, and they are also available in either MOA or MRAD subtensions. Not only did they have these more modern features, they also brought the always high quality Nikon glass lenses that they are so famous for. That day we shot and killed steel at 1800 yards with the Black 6-24 mounted to a .375 Cheytac.
I could barely wait to get my hands on one, the scopes had everything I wanted in a sub $1000 price range. And even better than that, they were priced well below comparable scopes from other trusted names.

Setting the zero-stop

When I got my FX 1000 4-16 in the mail (after chasing down the UPS driver) I hastily opened up the package to get this party started. I already had a rifle and rings ready to go, it was a Winchester Model 70 chambered in 7 WSM, it’s sole purpose in life is to make elk into elk steaks. Within a few minutes I had the scope mounted, and I took it outside to bore-sight it.
Another great feature of the FX 1000 is the zero-stop, if your not familiar with a zero-stop, you need to be. After zeroing your elevation turret for whatever your zero distance is, you set the zero-stop. This is accomplished by loosening the three allen screws around the turret grip area, and lifting the turret itself off the top. Underneath you will find another knurled ring with another three allen screws holding it tight over a threaded stud. All that is required is to loosen the screws, and then turn the knurled ring down until it stops. Once you’ve done that, you retighten the allen screws and re-install the turret aligning it at the zero mark.

This feature makes it simple and reliable to return your scope to zero after dialing elevation for distance. The Nikon zero-stop is fast, strong, and clean. I say clean because it doesnt use shims or blocks like other scopes. These types sometimes can cause a slow buildup of friction as they lockup, causing a mushy zero, and unessesary effort to start or stop turning. The Nikon is completely opposite of that, it turns until it stops, exactly on zero, every time.

This young moose made good eye candy while testing my scope.

The FX-MRAD reticle is much simpler than many of the hottest reticles on the market today, and thats just fine. The reticle has plenty of detail for real use, without getting too busy or complicated. Subtensions with .2 MIL and a hollow spot on the half MIL marks is very handy when doing holdovers or wind doping. Numbered marks on the even MIL marks are also handy when you start getting further away from the centerline. Reticle’s have advanced just like scopes, many shooters like the “Christmas tree” type reticles that are popular these days. While I personally prefer them, I dont mind using a standard milling reticle such as this either. And for those who like an uncluttered perspective they are probably better.

With the scope now mounted, I was ready to hit the range, which for me is up into the snowy and clouded Wasatch Mountains.
My bore sight job was close enough to get us on paper, and with a couple quick reticle measurements, I had the rifle zeroed. Even with a zero cant scope base, the rifle still had 18 MRAD of its 25 available MRAD to correct up. On this rifle 18 MRAD will get me out to approximately 1600 yards, which is beyond where I would ever anticipate using it, so no worries there.


With ten MRAD per revolution turrets, its easy to keep track of which rev of the turret you are on. Even so, the turret base has markings for you to keep track of, something all manufacturers should do.
Speaking of the turrets, they are just stiff enough, and have a crisp and audible click. With a rifle as flat shooting as this, the scope will likely never dial more than seven or eight MRAD, but it’s nice to have more if you need it.

I also tested the turret values, I did this by measuring out 100 yards exactly, and bolting the scope into a vise. Then measured the click value against a yard-stick. The results were very pleasing, especially since I am so bad at math. The turrets were very consistent and repeatable, always returning to the same spot when I hit the zero-stop. And over the course of the 18 MRAD from zero to topped out, there was as little as 0.3 MRAD of disparity between what was dialed, and what the reticle actually moved. I’m no Galileo, but thats close enough for what we do around here.

The parralax adjustment was pretty close to the aligning numbers on the focus knob. I usually disregard the numbers and just turn it to where the image is clearest, and minimum parralax, so its pretty nice when they are at least close.

Lens quality is exactly what you would expect from Nikon. All images were bright and clear, even in lower light conditions as the sun faded. Very minimal aberration around the edge of the sight picture regardless of magnification setting.
And despite the cold blowing snow of the high Rocky Mountains, the scope never fogged up on me, though I did need to blow the accumulation off the glass now and then.

A great companion to any good rifle is the Nikon RangeX laser rangefinder, you can read more about it here.

Shooting with the FX 1000 was what you would expect from a good scope. Targets are easily identified, and the reticle was very useful for measuring corrections at distance. The texture of the magnification ring and turrets was a very agressive, I like the firm purchase it gives to your hands. And the firm audible clicks would make it easy to use even when wearing gloves.

I took the rifle all the way out to 1150 yards, I was hitting a little high at that distance, but using the reticle to measure the deviation, it was easily corrected. The 4-16 magnification range is great for these distances, enough to clearly see targets, trace, and impacts. While not being so magnified as to darken the image, and exacerbate every small movement.

I’ve tried to come up with something about this scope that I dont like, and to be honest I’m having a hard time doing it. The price point of this scope puts it in prime position for guys who want a reliable and tough riflescope, but who dont want to spend four digits. It comes with the prestige of Nikon, and their no fault lifetime repair/replacement warranty.

If you are working on your next rifle build, and your optics budget is around $600, you’d be ill-advised to not check out the offerings of the Nikon Black FX 1000 in either 4-16 or 6-24. I told you at the beginning that this Nikon replaced an old standby scope, the particulars aren’t as important, but I paid significantly less for the Nikon, and I feel its superior in every way.

I have used and played with many high end scopes, and it’s very refreshing to find such satisfaction at this price, for that I give Nikon a near perfect score.
That old Buckmaster was the best I could afford at the time, but the new FX 1000 will serve on many of my rifles because it is a perfect fit, irrespective of its cost.

-CBM

Riton Optics RTS Mod 5 6-24X50 Riflescope

The optics race is a nonstop fight to get the attention of prospective shooters. It has been exciting if nothing else to watch some of the developments over the past decade or so, particularly from a consumer’s point of view. But have there been any real game changers? Today we will look at one of the contenders, the Riton Optics RTS Mod 5 6-24X50 Riflescope.

I am always on the lookout for good optics, as I am frequently approached by friends and others looking for good shooting options. And optics is one of those heavily fielded questions.
So when I had the opportunity to try out one of Riton Optics scopes, I jumped at it.

Riton is a fairly new manufacturer, I had hardly noticed them before getting hands on one of their scopes. That scope is the RTS Mod5 6-24X50, it is a first focal plane scope, which is a must for me anymore. It has a traditional configuration with a side focus/parralax adjustment, an illuminated proprietary reticle with the rheostat on top of the eye box, and a focus ring at the back.

First Focal Plane reticle

The reticle and turrets are both MOA, I’m more of an MRAD fan, but at least they both match. It wasn’t that long ago that many scopes were a hybrid mix of MOA and MRAD, thank goodness those days are gone.
I like the reticle, I found it very useful for measuring corrections and holdovers. Being an FFP reticle was also very handy, avoiding any kind of field math is a plus for my slow processor.

The turrets feature a push pull locking system, to keep them from being turned unintentionally. There are fifteen minutes per revolution of the turret with a total of 70 MOA internal adjustment, that is plenty of adjustment for the kind of shooting I do. I ran the scope on two different rifles, first on my 6.5CM MDR, a bullpup semi auto multicaliber, and then on my brand new 25Creedmoor, a custom built bolt rifle in an impressive new caliber. Both rifles shoot well beyond a kilometer, and the Mod 5 had all the elevation and power I needed for such shots. (Scope was mounted in a 20 MOA cant on both rifles)

the suppressed MDRX and Riton combo worked great

While shooting the MDRX I became quite familiar with the features of the Riton scope, though it took me a second to revert back to MOA.
Engaging targets as far as twelve hundred yards was no problem with the Mod 5. I am not a large magnification shooter, I usually have about five to ten more X’s than I need, but most of the time I shoot between eight and sixteen power.

I think that is where the Mod 5 shines, as with most scopes, you loose some clarity and brightness at the higher magnification. And in my experience, the lower the price point on the scope, the higher the disparity in sharpness at high magnification.
The Mod 5 was no different, I did find that at twenty four power it was a little difficult to pick out little details out past the grand mark. I solved the problem by backing off to eighteen or twenty power for those long observations. I also wish I’d had a sunshade for it, most of my scopes use one, and it is very apparent when even a little bit of sunlight hits the objective. Luckily, Riton has me covered, and Ive got a shade on the way.

I also ran a test on the click values, they were consistent, but slightly off. Over the course of the forty nine minutes of available elevation from my zero, the click value was on average 0.262 MOA. Again, thats a little off, but it was consistent. The good part was it returned to zero perfectly every time, and no significant reticle wandering or cant.
There was a time that I wouldn’t have trusted a sub 1000$ optic to be precise for repeatable turret travel in serious long range shooting, but technology has caught up it seems. And now scopes like this one are showing that not only can it be done, it can be done well.

The Mod 5 weighs in at thirty ounces, which isn’t necessarily light when compared to it’s competition, but its not particularly heavy either. For my taste, it’ll do just fine. I am used to hauling heavy guns all over these mountains, so switching to something this light was very refreshing.

I ran the Riton pretty hard, up and down, zooming in and out, hiking across mountains and riding up dirt roads in the bed of a truck, semi auto fire,  mounting, re-mounting, etc. No issues with it so far, it keeps right up with me.
All Riton scopes are guaranteed for life, with no hoops to jump, or rules to follow. Thats good to know, becasue we all know about Murphy’s Law.

desert tech mdrx with riton scope
the Riton made a good companion to my Desert Tech MDRX

There was plenty of things to like about the Mod 5. I like the reticle, and the the glass is inline with the price point, the internals appear to be robust and repeatable, with simple turret rezeroing. I will also say this, according to the medical practitioner, my eyes are in pretty good shape. So I tend to second guess my own approval of some optics, mainly because what looks fine to me, is usually pretty crummy when someone with anything less than great vision tries it out. I was happy that the Riton RTS Mod 5 got more than just my own approval. The clarity and quality of the imagery seen through the scope was exactly what I would have expected for a scope in this price range.

If I had to pick out the things I dont like about it, I guess that wouldn’t hurt either;
-MRAD for starters, its not 1987 anymore. I know there are some misguided souls out there still addicted to minutes, but the rest of us have graduated to MRAD. Having both options would greatly improve this scopes desirability to a larger audience.
-Turret rotation graduations, would be very helpful to see what rev your on.
-Parrallax, seemed a little off at times, not bad, but requiring frequent adjustment and checking.
-Magnification ring, the texturing was counterintuitive, making it slightly uncomfortable from the shooting position to zoom in or out. This is a very small gripe, and could simply be preference.

tikka t3x with riton scope
Here you can see the Riton mounted to my Tikka T3X

I dont want to sound too hard on this scope, because I actually do like it very much. Hunting season is here, and Junior and I have a date with several deer, and elk. I have all the confidence in this scope to get us on target, whether it be a head shot on a cow elk at four hundrd yards, or a high shoulder shot on a big cross canyon buck at eight hundred and fifty yards.

I look forward to a long future with this scope, and Im sure it wont be long till Riton Optics brings something new. They obviously have the drive, adapting newer and better optics is inevitable. I’ll be waiting to see what that is, and I’ll make sure to have an empty set of rings available until it does.

-CBM

US Optics B25

Introduction

The craziness of youth has somewhat subsided in me, I used to haul all kinds of garbage with me all over the mountains. To some degree I still do, but the wisdom that comes with age has also taught me when to say enough. There was a time when I would carry in my pack a days worth of snacks, water, lots of ammo, shooting mat, tools and who knows how many other things. All this for a quick couple-hour hike around the steep Rocky Mountains that tower over the valley I call home, the Scout motto was never lost on me. Perhaps it was experience that assuaged the contents of my backpack, maybe it was the tired back and legs that carried all my gear that convinced me to lighten up. But like it always does, it seems that technology has snuck in and played a big part in lightening the load. Good gear tends to be heavy, light good gear tends to be expensive, today I want to discuss how I have applied all this to my backcountry recreating. Today I bring you a review of the US Optics B25 rifle scope.

Many of you may remember that for quite some time I carried a US Optics ER-25 scope, it was a spectacular optic. It carried almost every option I could have dreamed up when I first got into this business, and it was tougher than I could have ever imagined. US Optics scopes are famous for their robust construction, and they stand up to abuse that would make a safe queen owner toss their lunch. Hardly a gimmick, I can attest that my USO took several spills, many of which I thought for sure would end up costing me money, a trip back to the factory, and some serious downtime. But to my surprise and delight, my scope never lost zero, or required re calibration. Even falling onto concrete mounted to a twenty pound rifle landing on the scope itself wasn’t enough to damage the scope beyond a few dings.

A young buck seen through the B25 and Gen2 XR Reticle

With experience like that, countless trips into the wild, constantly dialing and working the scope, you might imagine my discomposure when I first saw and lusted over US Optics new line of scopes. The B series of scopes have what I would consider smooth and more modern lines, I know that some people don’t care about looks, but I am a sucker for performance when it meets precision and beauty. When I first got my hands on one, I couldn’t help but be impressed. Clean and bright were the images I saw through the glass, and the always ample selection of reticles leaves no excuse to even the pickiest of reticle snobs. Simple and strong turrets, with improved features like locks, and a quick tooless rezero for the elevation only increased my desire to run these scopes through the paces of my alpine shooting adventures. But one of the significant improvements of the B series of scope was the weight. The robustness of US Optics scopes has always translated into significant weight, something I was okay with because I knew it going in. The B 25 weighs six ounces less than my old ER 25, yet boasts all these improvements. The scope may feel light because I’m used to something heavier, but it sure felt like a bonus to me.us optics

Giving up weight isn’t a bad thing, as long as you don’t loose the benefits of strength and durability. Which the B25 certainly seems to have retained. I still wouldn’t say I am anywhere near having a lightweight rig, but it still goes with me everywhere. Reducing the weight certainly helps, but having what some might call excessive scope can pay huge dividends in these mountains. Glassing a nice buck from a mile away usually requires a spotting scope, and a good one too. And while I wouldn’t compare a riflescope to a good spotter, I don’t have to worry about carrying them both.

The EREK 2 Turret Lock

the B25 mounted on my Desert Tech SRS with an Atlas Bipod

The B25 is very clear, regardless of magnification I found my eye was quite comfortable focusing on my target, and the parallax adjustment made both downrange and reticle very clean. Any scope looses much of its brightness as you zoom in, but even at dusk I had no problem seeing and holding perfectly on very distant deer. It was also very handy in picking out Marmots from their hides in and around the boulders.

The new EREK 2 elevation turret is one of my favorite features of the scopes. The turret has a lock ring that you simply pull up on, and it engages the turret keeping it from being rotated. I like the idea a lot more than the pull-up/push-down turrets, it seems like a much stronger design, and less likely to be damaged or messed with. The turret lock is also used when re-zeroing the scope (see video below). The EREK 2 turret has a tool-less zeroing feature that allows you with your bare hands to quickly reset your scope’s zero, I found this feature incredibly useful. On any given day, my density altitude can vary from 4000 ft up to 11,000 ft depending on atmospheric conditions. With drastic changes like that, its nice to be able to quickly adjust my zero, without needing to break out my tool bag. The windage turret also locks, it is much simpler, and of the push pull design. I have no problem with that since I rarely dial wind, due to its fickle and switchy nature.

With so many options today, there is literally something for everybody. The new lighter weight of the US Optics B25 is a great excuse to re-scope my rifle, as I have become quite accustomed to having more scope than some would deem needed. I think there is plenty of room for larger tactical style optics in the hunting realm, obviously they will only appeal to those willing to carry it. I for one have seen the value of these scopes, and the advantage they give me.

I hit the field with the B25 in earnest, after some range time which consisted of a couple rifles chambered in 308win, 300wm, and also a big one chambered in 408 Cheytac. I figured if the big calibers didn’t hurt the B25, then surely my Desert Tech SRS A1 Covert wouldn’t do it any harm. Most of my shooting was using my little Short Action Customs 223 Remington barrrel, but I also shot 6.5CM, 308win, and 338LM with it. Again, the quick re-zeroing of the turrets made these transitions very easy. The high magnification of the scope was also very handy when trying to shoot tiny groups on paper, something I am not very good at, so I avoid it whenever possible. It also proved valuable when shooting at distances beyond what most routine shots are taken at, I managed to shoot an 18 inchish group at 1133yds with my little 223 Rem. Through the clear 25X I could see my trace coming down on the target, and the impacts and voids left by my bullets. Switching from one target to another I dialed back and forth, the audible clicks were also crisp, allowing me to count them even if I wasn’t looking up at the turret. I also noticed the magnification ring was not as stiff as many other scopes I have used, I don’t think a cattail would be needed on these scopes but for serious competition.

Shop the full line of US Optics riflescopes

Too much scope? Never!

Shooting with this scope felt like a chat with an old friend, everything where it was and as it should be. Dope lined up meticulously where I expected it to, and nothing ever surprised me. I found it difficult to find a downside to the B25. Of course for a scope mounted to a mountain rifle such as mine, you could always wish for something lighter, or more compact. But I fear until new manufacturing and materials become available, it will be hard to make them much lighter, or smaller. But I am sure that when it happens, companies like US Optics will be the first to bring them to market.

-CBM

Check out our other rifle scope reviews here

Rangefinder Shootout

 

Rangefinder Shootout

rangefinders
One of the most important tools a marksman can have in his bag, is a good rangefinder. When I first started shooting, I didn’t have the money to buy one, neither did I have the sense to. Interesting how something seemingly insignificant would soon become indispensable. I figured a lot of these things out the hard way, the stupid way you could even say. Despite my hardheaded approach to distance shooting, I got pretty good at estimating range. A skill that was later confirmed by the rangefinder that had done without far too long.
By the time I finally purchased a laser rangefinder, I had at least gained enough smarts to recognize what I needed.
My first purchase was a Leica 1200, a good piece of equipment that served me very well. I quickly learned as I played with other rangefinders that good ones usually reach beyond their limits. While lower end units, wouldn’t even reach advertised distances.
As my skills matured, and distances became longer, I out grew that old Leica, and it’s since been replaced by a newer CRF model. I also stepped up to a Swarovski Laserguide, as with my Leica, the Swarovski reached well beyond its advertised envelope, reaching to 1800+ yards in the right conditions.
These tools have sharpened this shooters abilities, through day to day use, and confirming estimations.
Well, I was recently handed one of the new Sig Sauer Kilo 2000 rangefinders. I have heard many good things about this new line of optics from Sig. And this Kilo seemed like a big winner.
With an advertised range of 3400yds (reflective) I was very optimistic. In my opinion, it fell into that price range where rangefinders always underperformed. But even so I thought, if it reaches half what they advertise, it’d be worth the money.
I quickly made my way to my Rocky Mountain haunt, to put the Kilo against my Leica CRF1200, and my Swarovski Laserguide.
I’m a simple guy, I don’t care much for bells and whistles. So though the Kilo features an angle adjusted range, I switched it to simple range only. I can do field math, I like whole numbers, and percentages. I don’t need my optics to do it for me. Plus I like to know exactly what I’m getting into.
A quick run through the various rock piles in my cold and snowy canyon would tell me how well the Kilo measured up. 12790832_1704415849801909_8589088304493706408_n
At the quarter mile mark, all three rangefinders barely broke a sweat. My first impression of the Kilo was how fast it returned with a reading. Faster than my Leica, and twice the speed of the Swarovski. “This will triple the speed at which I miss my targets.” I thought to myself, “better slow down”.
I soon noticed a slight difference in color while looking through the Kilo, a bluish hue that was quite apparent (see pics). This is certainly not a big deal, at least to me. It was certainly lighter as well, easily placed in a pocket to be carried. The optical field of view looking through the Kilo was almost exactly the same as my CRF1200, the quality was comparable as well. Both of them were narrow compared to the Laserguide, which also had a better image I might add. But for twice the price of the others, it ought to.
I pushed all three RF’s one after another out to 1050yds, all three of them working flawlessly. And returning ranges to within +/-1 or 2 yards. Perfectly acceptable for a guy who’s targets are +/-2 or 3 yards wide right?
Up to this point I had to say I was pretty happy about the results. Simply because For most people I know, a good rangefinder that will reliably hit 1,000yds plus and cost under 500$ is a pretty good deal.12321320_1704415956468565_4349457969971441508_n
Well I had to push them further. The sunlight was fading somewhat as it hid behind the evening clouds to the west. I thought surely I could push the Kilo further, but to my surprise I couldn’t get it to read on anything further out.
I thought that perhaps maybe this Kilo couldn’t hang with my “higher end” RF’s. So I pulled out my Leica, and the Top hat it came with, and tried to hit the same rock. To my surprise, it wouldn’t read either. I suppose the light and conditions weren’t good enough for either RF to read. But before I put shame upon the two smaller units, I figured I’d check to see how the Swarovski would fair.
Sure enough, as usual, the Laserguide came through. Showing 1300yds. My suspicions about light angles and conditions were confirmed, as my Swarovski would reach no further in the cold quiet canyon. Leaving me scratching my head.
Further testing is warranted, and no doubt I will get more info. I’d like to see how far this Kilo will really go, I am skeptical that it will actually reach advertised distances due to my experiences, as well as those of others. None the less, I am very impressed that Sig has produced this RF for less than 500$ and that easily hits to 1000 yards and beyond. If I could go back to the beginning of my shooting career and sell myself this Kilo, it may have been one of the best purchases made.
I won’t be replacing my Swarovski anytime soon, but if I was in the market for a new rangefinder, for hunting, or practical shooting, the Kilo 2000 would be top contender.